Stainless Steel Seamless Pipes

Product Details:

We are manufacturing, importing and exporting a qualitative assortment of ASTM A312 TP 321/321H Seamless Pipes. The offered steel pipe is manufactured in conformity with the set industry standards utilizing the best grade raw material and modernized technology. Furthermore, this steel pipe is tested on various quality parameters to ensure flawlessness. In addition to this, we offer this steel pipe to our precious clients at very reasonable prices.

Features:

• Dimensional accuracy
• Resistant against corrosion
• High durability

Specifications:

• ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790
• Wall Thickness available: Schedule 5S - Schedule XXS (heavier on request)
• Length: Single Random, Double Random & Cut Length.
• Type: Seamless / ERW / Welded / Fabricated / LSAW Pipes
• Dimensions: All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.

Additional Information:

• Item Code: SS321

Product Details:

We are one of the leading manufacturer, exporter & suppliers of premium quality ASTM A312 TP 347H Stainless Steel Pipes & tubes . We provide a wide range of SS 347H Pipes and Tubes in Seamless, Welded, SAW, LSAW, DSAW etc. SS 347H pipes and tubes are used widely in critical industrial applications like construction, oil & gas, petrochemical, natural gas, general industrial applications, etc. These pipes & tubes are available in various sizes, shapes as per the requirements of our clients. These pipes & Tubes are offerd at very reasonable rates to our clients.

Specifications:

• ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790
• Wall Thickness available: Schedule 5S - Schedule XXS (heavier on request)
• Length: Single Random, Double Random & Cut Length.
• Type: Seamless / ERW / Welded / Fabricated / LSAW Pipes
• Dimensions: All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.

Additional Information:

• Item Code: SSPIPE

Product Details:

Specifications:

• We keep ready stock of injection pipe in 304,316 grades.
• Length 1 meter and also available in coil forms.

Additional Information:

• Item Code: G3325

Product Details:

We are a noteworthy organization engaged in offering the best quality Astm A312 Tp 316/316l Stainless Steel Seamless Pipes. The offered steel pipes are manufactured as per the international quality standards using high quality raw material contemporary techniques. These steel pipes are tested on well-defined quality norms to ensure its excellence. We offer these steel pipes on diverse specifications as per the needs of customers.

Nextgen Steel Alloys is a huge exporter of Stainless Steel Pipes in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabiaand the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

Features:

• Precision engineering
• Robust construction
• Corrosion resistance

Specifications:

Product Range:

• Specifications:- ASME/ASTM A-213, A-269, A-312, IBR, EN/DIN, EN, JIS, UNS, UNI, AFNOR NF.
• Certificates:- With Mill TC as per EN10204 3.1, IBR TC, Third party inspection etc.
• Grades:- TP- 304, 304 L, 304 H, 316, 316 L, 316 LN, 316 TI, 316 H, 321, 321 H, 317, 317 L, 347, 347 H, 904 L, 310 S, 310 H, 405, 410, 430 Stainless Steel Seamless Welded Pipes .
• Ready Stock:- Instrumentation Tubes , Heat Exchanger Tubes, Surgical Tubes NB Size Pipe
• Length:- Tube Length - 1 Mtr Upto 12 Mtrs Long
• Surface Finish:- Bright Annealed / Cold Drawn / Polished
• Any Third Party Inspection, so desires, is most welcome

Product Details:

Description

Hastelloy C-276 is a nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good fabricability. The alloy should be considered for use in environments where resistance to hot contaminated mineral acids, organic and inorganic chloride-contaminated media, chlorine, formic and acetic acids, acetic, acetic anhydride, sea water and brine solutions is desired.

Hastelloy C-276 has resisted the formation of grain boundary precipitates in the weld heat-affected zone, making it a candidate for most chemical and petrochemical processing applications in the as-welded condition. The alloy has resisted both general and localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.

Hastelloy C-276 is readily fabricated by welding, using methods similar to those utilized for nickel-based alloys.

TYPICAL SPECIFICATION PACKAGES

UNS-N-10276

WERKSTOFF 2.4819

BAR:ASTM-B574, ASM-SB-574

Hastelloy C276 (HAST-C276) – Premium Corrosion-Resistant Alloy for Demanding Applications

As leading stockists and suppliers of high-quality ferrous materials, we proudly offer Hastelloy C276 (HAST-C276), a superior nickel-molybdenum-chromium alloy renowned for its exceptional corrosion resistance and durability in extreme environments. Ideal for industries such as chemical processing, oil and gas, petrochemical, and pollution control, Hastelloy C276 is engineered to withstand highly corrosive media, including sulfuric acid, hydrochloric acid, and chlorine-containing solutions.

Key Features of Hastelloy C276 (HAST-C276):

• Unmatched Corrosion Resistance: Performs exceptionally well in both oxidizing and reducing environments, making it a top choice for harsh chemical applications.

• High Temperature Stability: Maintains structural integrity and resistance to pitting, crevice corrosion, and stress corrosion cracking at elevated temperatures.

• Versatile Applications: Widely used in reactors, heat exchangers, valves, pumps, and other critical components in aggressive industrial settings.

• Nickel-Based Alloy: Offers excellent mechanical properties and fabricability, ensuring reliability in demanding conditions.

As trusted suppliers of ferrous and non-ferrous materials, we provide Hastelloy C276 (HAST-C276) in various forms, including sheets, plates, bars, pipes, and fittings, tailored to meet your specific project requirements. Whether you need corrosion-resistant alloys for chemical processing equipment or high-performance materials for offshore applications, our inventory ensures top-quality solutions.

Product Details:

Principal Features

HASTELLOY® S alloy (UNS N06635) is a nickel-base, high-temperature alloy with a unique combination of properties. It has excellent thermal stability, low thermal expansion and excellent oxidation resistance to 2000°F (1093°C). In addition, the alloy has good high-temperature and thermal fatigue strength. S alloy retains its strength and ductility after aging at temperatures of 800 to 1600°F (427 to 871°C).

S alloy was developed for applications involving severely cyclical heating conditions where components must be capable of retaining their strength, ductility, and metallurgical integrity after long-time exposure. It is used extensively as seal rings in gas turbine engines where its low thermal expansion coefficients is also important.

All wrought forms of S alloy are supplied in the solution heat treated condition unless otherwise specified. The standard heat-treatment is 1950°F (1066°C) followed by cooling in air or hydrogen. Since the alloy is very stable, cooling rates from slow-fumace cooling to rapid ice-brine quenching have virtually no effect on the mechanical properties.

HASTELLOY® S alloy can be readily forged and, because of its excellent ductility, can be cold worked. It can be welded by both manual and automatic welding methods including gas tungsten arc (GTAW), and gas metal arc (GMAW). Forging should be performed from 2100°F (1145°C) to 1600°F (871°C) up to the final 20 percent cross-section reduction. The final 20 percent reduction should be done from about 1900°F (1038°C) to 1500°F (816°C).

Principal Features

HASTELLOY® S alloy (UNS N06635) is a nickel-base, high-temperature alloy with a unique combination of properties. It has excellent thermal stability, low thermal expansion and excellent oxidation resistance to 2000°F (1093°C). In addition, the alloy has good high-temperature and thermal fatigue strength. S alloy retains its strength and ductility after aging at temperatures of 800 to 1600°F (427 to 871°C).

S alloy was developed for applications involving severely cyclical heating conditions where components must be capable of retaining their strength, ductility, and metallurgical integrity after long-time exposure. It is used extensively as seal rings in gas turbine engines where its low thermal expansion coefficients is also important.

All wrought forms of S alloy are supplied in the solution heat treated condition unless otherwise specified. The standard heat-treatment is 1950°F (1066°C) followed by cooling in air or hydrogen. Since the alloy is very stable, cooling rates from slow-fumace cooling to rapid ice-brine quenching have virtually no effect on the mechanical properties.

 

HASTELLOY® S alloy can be readily forged and, because of its excellent ductility, can be cold worked. It can be welded by both manual and automatic welding methods including gas tungsten arc (GTAW), and gas metal arc (GMAW). Forging should be performed from 2100°F (1145°C) to 1600°F (871°C) up to the final 20 percent cross-section reduction. The final 20 percent reduction should be done from about 1900°F (1038°C) to 1500°F (816°C).

Product Details:

Principal Features

HASTELLOY® X alloy (UNS N06002 (W86002) is a nickel-chromium-iron-molybdenum alloy that possesses an exceptional combination of oxidation resistance, fabricability and high-temperature strength. It has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. X alloy exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600°F (650, 760 and 870°C) for 16,000 hours.

Ease of Fabrication

HASTELLOY® X alloy has excellent forming and welding characteristics. It may be forged or otherwise hot-worked, providing it is held at 2150°F (1177°C) for a time sufficient to bring the entire piece to temperature. As a consequence of its good ductility, HASTELLOY® X alloy is also readily formed by cold- working. All hot- or cold- worked parts should be annealed and rapidly cooled in order to restore the best balance of properties.

The alloy can be welded by a variety of techniques, including gas tungsten arc (GTAW), gas metal arc (GMAW), shielded metal arc (SMAW), and resistance welding.

Additional information regarding fabrication can be found here.

Heat Treatment

Wrought forms of HASTELLOY® X alloy are furnished in the solution heat-treated condition unless otherwise specified. X alloy is typically solution heat-treated at 2150°F (1177°C) and rapid cooled. Bright annealed products are cooled in hydrogen.  Annealing at temperatures lower than the solution heat- treating may cause precipitation of secondary phases, which may affect the alloy’s strength and ductility.

Useful for Aircraft, Furnace and Chemical Process Components

X alloy has wide use in gas turbine engines for combustion zone components such as transition ducts, combustor cans, spray bars and flame holders as well as in afterburners, tailpipes and cabin heaters. It is recommended for use in industrial furnace applications because it has unusual resistant to oxidizing, reducing and neutral atmospheres. Furnace rolls of this alloy were still in good condition after operating for 8,700 hours at 2150°F (1177°C). HASTELLOY® X alloy is also used in the chemical process industry for retorts, muffles, catalyst support grids, furnace baffles, tubing for pyrolysis operations and flash drier components.

Hastelloy X – High-Temperature Nickel-Chromium-Iron-Molybdenum Alloy

As leading stockists and suppliers of ferrous and high-performance alloys, we offer premium-grade Hastelloy X (UNS N06002), a nickel-chromium-iron-molybdenum superalloy renowned for its exceptional oxidation resistance, high-temperature strength, and outstanding creep resistance.

Key Features of Hastelloy X:

✔ Excellent Oxidation Resistance – Performs reliably in extreme environments up to 2200°F (1200°C).
✔ Superior Creep Rupture Strength – Ideal for gas turbines, combustion chambers, and aerospace applications.
✔ Outstanding Fabricability – Can be welded, machined, and formed with ease.
✔ Corrosion Resistance – Resists carburizing and reducing atmospheres, making it suitable for chemical processing & petrochemical industries.

Common Applications of Hastelloy X:

• Aerospace components (turbine blades, afterburners, exhaust systems)

• Industrial furnace parts (heat exchangers, burners, radiant tubes)

• Chemical processing equipment

• Power generation systems

 

 

Product Details:

Stainless tubing, both welded and seamless, is stocked in a wide range of standard and metric sizes at Nextgen Steel & Alloys. Our commercial stainless steel tubing inventory primarily consists of the austenitic grades of 304, 304/L, 316 and 316L, 347, 347H, 321, 317L and 904L in a size range from 1/16” to 12” outside diameters in straight lengths and coils, where applicable. Material is stocked in the annealed and pickled, bright annealed, mill finish and polished conditions. These are the four most popular austenitic grades of stainless steel tubing, which provide excellent overall corrosion resistance.

These grades are sold to a wide range of industries/markets, due to their overall corrosion resistance and good machinability.

Stainless Tubing Applications:

• Marine applications
• Food processing
• Pharmaceuticals
• Medical implants
• Power generation
• Automotive
• Chemical and petrochemical
• Fertilizer
• Mechanical and plant engineering
• Oil and gas

Because of the extensive inventories of seamless commercial stainless steel tubing, you are sure to find intermediate sizes of both diameter and wall combinations. It has always been our goal to multi-certify our inventories to the maximum number of industry standard specifications possible.

Product Details:

Features:

• Desirable Hardness
• High Electrical Conductivity
• Low Temperature

Other Detail:

• Special pipes: Fabricated pipe (with radiography)
• In form of: Round, square, rectangle, oval, coil, flexible pipe, shaft, ‘u’ shape and hydraulic pipe
• In length of: Standard & cut length

Additional Information:

• Item Code: P316

Product Details:

We are a reckoned enterprise, which is engaged in delivering Non Ferrous Tubes to the clients. The offered range of non ferrous tubes is made utilizing optimum grade raw material and innovative technology in strict conformation with the international quality norms and standards. Along with this, the offered range of non ferrous tubes is suitably checked on different characteristics to maintain its authenticity throughout the designing process.

 

Features:

• High tensile strength
• Corrosion resistant
• Durable
• Reliable

Product Details:

Description

Haynes 25 is a cobalt-based alloy which combines good formability and excellent high-temperature properties. At 1800°F, Haynes 25 sheet has a 100 hour stress-rupture strength of 7000 psi. The alloy is resistant to oxidation and carburization to 1900°F. Haynes 25 has given good service in many jet engine parts. Some of these include turbine blades, combustion chambers, afterburner parts, and turbine rings. The alloy has also been used successfully in a variety of industrial furnace applications including furnace muffles and liners in critical spots in high temperature kilns.

TYPICAL SPECIFICATION PACKAGES

UNS-R-30605

WERKSTOFF 2.4964
BAR:AMS 5759

L605 (HS 25) Plate – High-Performance Cobalt-Chromium Alloy for Demanding Applications

As leading stockists and suppliers of premium ferrous materials, we offer L605 (HS 25) Plates, a high-strength cobalt-chromium-tungsten-nickel alloy designed for extreme environments. Known for its exceptional heat resistance, corrosion resistance, and mechanical strength, L605 (HS 25) is ideal for aerospace, industrial gas turbines, medical devices, and chemical processing applications.

Our L605 (HS 25) Plates are precision-engineered to deliver superior performance in high-temperature and high-stress conditions. With excellent oxidation resistance, wear resistance, and thermal stability, this alloy is perfect for components like turbine blades, combustion chambers, and exhaust systems.

Key Features of L605 (HS 25) Plates:

• High-temperature strength up to 1800°F (982°C)

• Outstanding corrosion and oxidation resistance

• Superior wear and fatigue resistance

• Excellent weldability and formability

Available in various thicknesses and sizes, our L605 (HS 25) Plates meet stringent industry standards, ensuring reliability and durability. Whether you need materials for aerospace engineering, medical implants, or industrial applications, we provide top-quality L605 (HS 25) Plates tailored to your requirements.

As trusted suppliers of ferrous materials, we ensure fast delivery, competitive pricing, and exceptional customer service. Contact us today to learn more about our L605 (HS 25) Plates and other high-performance alloys!

Keywords: L605 (HS 25) Plate, cobalt-chromium alloy, high-temperature alloy, corrosion-resistant plate, aerospace materials, heat-resistant plates, industrial gas turbine components, medical device materials, oxidation-resistant alloy, wear-resistant plates, ferrous materials supplier, HS 25 alloy plate, high-strength alloy plate, precision-engineered plates, turbine blade materials.

Product Details:

ALLOY 20TYPICAL SPECIFICATION PACKAGES

UNS-N-08020

WERKSTOFF 2.4660

PLATE:ASTM-B-463, ASME-SB-463

Alloy 20: Premium Corrosion-Resistant Nickel-Iron-Chromium Alloy

Discover the exceptional properties of Alloy 20, a high-performance nickel-iron-chromium alloy designed for superior corrosion resistance in demanding environments. Also known as Carpenter 20 or UNS N08020, this alloy is ideal for industries such as chemical processing, pharmaceuticals, food production, and petrochemicals.

Key Features of Alloy 20:

• Excellent Corrosion Resistance: Withstands sulfuric acid, phosphoric acid, and other aggressive chemicals.

• High Durability: Enhanced by the addition of copper and molybdenum, providing stability in harsh conditions.

• Versatility: Suitable for tanks, valves, pumps, heat exchangers, and piping systems.

• Weldability: Easy to fabricate and weld, ensuring cost-effective installation and maintenance.

Applications of Alloy 20:

• Chemical Processing Equipment

• Acid Storage Tanks

• Mixers and Reactors

• Food and Beverage Industry Components

• Pollution Control Systems

As trusted stockists and suppliers of ferrous metals, we provide high-quality Alloy 20 products tailored to meet your industrial needs. Whether you require sheets, plates, bars, pipes, or fittings, we ensure timely delivery and competitive pricing.

Choose Alloy 20 for unmatched performance and reliability in corrosive environments. Contact us today to learn more about our inventory and how we can support your projects with premium nickel alloys and ferrous metals.

Product Details:

Leveraging on our years of experience, we hold expertise in offering ASTM A312 TP 347/347H Seamless Pipes. Offered steel pipe is provided on diverse specifications as per the needs of customers. This steel pipe is manufactured from the raw material & cutting edge techniques in complete compliance with the set industry norms. The given steel pipe is thoroughly tested on several parameters before delivering to customers.

Features:

• Seamless finish
• Unmatched quality
• Tough surface

Specifications:

• ASTM A/ASME B667 / SA213 / A249 / A269 / A312 / A358 CL. I to V ASTM A789/A790
• Wall Thickness available: Schedule 5S - Schedule XXS (heavier on request)
• Length: Single Random, Double Random & Cut Length.
• Type: Seamless / ERW / Welded / Fabricated / LSAW Pipes
• Dimensions: All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.
• Test Certificates: MTC, IBR & Third Party Inspection.

Some of the major applications of grade 904L stainless steels include:

• Wiring in electrostatic precipitators
• Oil refinery components
• Seawater cooling devices
• Gas scrubbing plants
• Pulp and paper processing industries
• Acetic, phosphoric and sulphuric acid processing plants

Additional Information:

• Item Code: SS347HPIPE