Nextgen Steel And Alloys
Nextgen Steel And Alloys
Ambewadi, Mumbai, Maharashtra
GST No. 27ATYPM1096M1ZP
TrustSEAL Verified
Call 0804897916091% Response Rate
SEND EMAIL
 

Steel Plates

Offering you a complete choice of products which include c67 steel sheet, tool steel s2, s235j2 jr plates, en24 flats bar and alloy steel flat bars en24.

C67 Steel Sheet

C67 Steel Sheet
  • C67 Steel Sheet
  • C67 Steel Sheet
  • C67 Steel Sheet
  • C67 Steel Sheet
Get Best Quote
Approx. Price: Rs 150 / KilogramGet Latest Price
Product Brochure

Product Details:

Material GradeSS303
MaterialSpring steel
BrandNextgen Steel & Alloys
Size10 X 10 Feet
ApplicationConstruction
Thickness3-4 mm, 0-1 mm,2-3 mm,4-5 mm,>5 mm, 1-2 mm
Density0.270 lb/inch3
TechniqueHot rolled spring
Elongation25-35 %
Tensile Strength295 Mpa

Material specification sheet Saarstahl- C67S Material No.: 1.1231 German standard: DIN EN 10132 International steel grades: SAE:1070 JIS: S70CM Material group: Hot rolled spring steel C Si Mn P S Cr Al 0,67 0,22 0,75 <0,01 <0,01 0,23 0,03

Chemical composition: (typical analysis at Saarstahl in %) Deviation in chemical composition on request Application: Unalloyed steel for springs as belleville washers, spring plates and stabilizer bars for motor vehicles Hot forming and heat treatment: Forging or hot rolling: Normalizing: Soft annealing: Hardening: 1100 - 800°C 810 - 840°C/air 680 - 710°C/furnace 815 - 845°C/oil min. 59 HRC or 670 HV as quenched Mechanical properties: Condition of delivery Soft annealed (+A) or soft annealed and slightly rerolled (+LC) Quenched and tempered (+QT) 0,2% proof stress Rp0,2 [N/mm²] max. 510 1200 - 1900 Tensile strength Rm [N/mm²] max. 640 - Fracture elongation A80 [%] min. 16 - Hardness [HV] max. 200 370 - 580 Hardness [HRB] max. 92 - Hardness [HRC] - 38,5 - 54 Typical hardness values (HV) for quenched and tempered materials at different thickness ranges Effective thickness [mm] 0,30<=0,50 0,50<=0,75 0,75<=1,00 1,00<=1,50 1,50<=2,00 2,00<=3,00 Hardness [HV] 485 - 535 465 - 515 455 - 505 445 - 495 425 - 475 415 - 465
Request
Callback


Additional Information:

  • Item Code: 1188899
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
Yes! I am interested

Tool Steel S2

Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
Get Best Quote
Approx. Price: Rs 250 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1000 Kilogram
ApplicationOil & Gas Industry
ShapeSquare
MaterialCarbon Steel,Stainless Steel,Mild Steel
Thickness40-150 mm
Size3 m,6 m
GradeAISI S2
Purity99.97 %
Tensile strength640 and 2000 MPa.
Temperature25 Degree C
TypeRod
Density7.72 to 8.0 g/cm3

AISI S2 is a Shock-Resisting Steel grade Tool Steel. It is composed of (in weight percentage) 0.40-0.55% Carbon (C), 0.30-0.50% Manganese (Mn), 0.90-1.20% Silicon (Si), 0.30% Nickel (Ni), 0.30-0.60% Molybdenum (Mo), 0.50% Vanadium (V), 0.25% Copper (Cu), 0.03% Phosphorus (P), 0.03% Sulfur (S), and the base metal Iron (Fe). Other designations of AISI S2 tool steel include UNS T41902 and AISI S2.Steel is the common name for a large family of iron alloys. Steels can either be cast directly to shape, or into ingots which are reheated and hot worked into a wrought shape by forging, extrusion, rolling, or other processes. Wrought steels are the most common engineering material used, and come in a variety of forms with different finishes and properties. Tool steels typically have excess carbides (carbon alloys) which make them hard and wear-resistant. Most tool steels are used in a heat-treated state, generally hardened and tempered.

 

The typical elastic modulus of tool steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of tool steels ranges from 7.72 to 8.0 g/cm3. The typical tensile strength varies between 640 and 2000 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.


Further Information on AISI S2 Tool Steel

Availability

  • Tool Steels S2 is stocked by 0 North American distributors and produced by 2 large mills. Distributors will offer small quantity buys while mills will generally only sell large quantities, with delivery times anywhere from 10 to 50 weeks depending on size and form required
  • For mill (large volume) production click here

 

Request
Callback


Additional Information:

  • Item Code: 245461
  • Production Capacity: 1000 TON
  • Delivery Time: READY STOCK
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box.
Yes! I am interested

S235J2 Jr Plates

S235J2 Jr Plates
  • S235J2 Jr Plates
  • S235J2 Jr Plates
  • S235J2 Jr Plates
  • S235J2 Jr Plates
Get Best Quote
Approx. Price: Rs 50 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1000 Kilogram
ShapeRectangular
Material GradeS235,S275,S355,JO,JR,J2+N
BrandSeverstal (Russia),Nextgen Steel & Alloy
Thickness0-1 mm, 4-5 mm, 1-2 mm,2-3 mm,3-4 mm,>5 mm,5mm to 305mm thk.
Size (feet X feet)1250 X 6000,2500 X 12000 mm
I Deal InNew Only

Specification:

  • Standard : EN10025-2
  • Steel grade : S275JR, S275J0, S275J2, S235JR, S235J0, S235J2
  • Classification : Non-alloy structural steel
  • Application : Non-alloy steel for structural purposes

 

This are common mild steel/carbon steel plate for structural, manufacturing plant, machinery, mining equipment and Treatment of androgenic alopecia with Propecia vehicles, excavators, loader, bulldozers, crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas, port equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.

 

S275JR and its related series (S275J0, S275J2, S235JR, S235J0, S235J2) are very versatile common mild steel/carbon steel plate for multiple structural applications e.g. manufacturing plant, machinery, mining equipment and vehicles, excavators, loader, bulldozers, crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas, port equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.

S symbol for structural steel

275 indication of cuanto cuesta un lubricante en la farmaciathe min specified yield strength for thickness of under16mm.

  • JR symbol 20 temperature impact test.
  • J0 symbol 0 temperature impact test
  • J2 symbol -20 temperature impact test
Request
Callback


Additional Information:

  • Item Code: S235JR
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: NHAVA SHEVA PORT
  • Production Capacity: 50000
  • Delivery Time: 3WEEKS
  • Packaging Details: WOODEN PALLETS
Yes! I am interested

EN24 Flats Bar

EN24 Flats Bar
  • EN24 Flats Bar
  • EN24 Flats Bar
  • EN24 Flats Bar
  • EN24 Flats Bar
Get Best Quote
Approx. Price: Rs 150 / KilogramGet Latest Price
Product Brochure

Product Details:

MaterialSS
ShapeRectangular
TechniqueHot Rolled
UsageHousehold Repair, Manufacturing, Construction
Single Piece Length6 meter, >36 meter, 36 meter, 3 meter, 18 meter
Density7.80 g/cm3
Hardness167 HB
Temperature640 Degree C
Tensile Strength270 Mpa
BrandNextgen Steel & Alloys

EN24 EN24T flat bar and round bar steel stockholders and suppliers, delivering to the whole of the UK. This grade is a nickel chromium molybdenum specification usually supplied hardened and tempered as EN24T or EN24U. EN24T steel is readily machineable and combines a good high tensile steel strength with shock resistance, ductility and wear resistance. It is a widely used engineering steel with a tensile strength of 850/1000 N/mm². It has reasonably good impact properties at low temperatures, whilst it is also suitable for a variety of elevated temperature applications. Flame or induction hardening of EN24T can give a case hardness of 50 HRc or higher.

We welcome export enquiries for alloy steel. Contact our sales office and consult our shipping policy for further details.
Analysis Carbon 0.35-0.45% Silicon 0.10-0.35%
Nickel 1.30-1.80% Manganese 0.45-0.70%
Chromium 0.90-1.40% Phosphorous 0.05% max
Molybdenum 0.20-0.35% Sulphur 0.05% max

Form of Supply:   
  • West Yorkshire Steel are stockholders and suppliers of EN24T flat, round and plate – squares, flats and diameters can be sawn cut to your required sizes. Diameters in EN24T are available bright drawn and black hot rolled. EN24T can be sawn to your required lengths as one offs or multiple cut pieces.
  • Ground steel bar can be supplied, providing a high tensile engineering steel precision ground bar to tight tolerances.
  • Contact our experienced sales team who will assist you with your EN24 alloy steel enquiry.

EN24T Flat Bar:   
  • EN24T flat bar is available cut from large rectangular block, pieces can be cold sawn to your specific sizes.

Applications   
  • EN24 was originally introduced for use in the motor vehicle and machine tool industries for gears, pinions, shafts, spindles and the like. Later its applications became much more extended. Suitable to produce parts for such as locomotives, _cranes, rolling mills, coal cutting machinery etc. where good strength and fatigue resistance is called for. Other applications for EN24 and EN24T are found in die casting and hot metal working, such as die bolsters, racks and pinions, angle pins for pressure die casting, hot stamping dies for aluminium stamping, die beds for steel stamping, lower temperature nut, bolt and rivet heading dies, large section drop forging dies. It is widely used in the plastic and rubber moulding industries for moulds (particularly rubber moulds), hob retaining rings, patens, retaining rings for built up moulds, stop pins for moulds. For moulds EN24 is normally supplies hardened and tempered to ‘T’ condition. If a higher hardness is desired EN24T should be annealed and then heat treated to the required hardness.

Request
Callback


Additional Information:

  • Item Code: 119
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested

Alloy Steel Flat Bars EN24

Alloy Steel Flat Bars EN24
  • Alloy Steel Flat Bars EN24
  • Alloy Steel Flat Bars EN24
  • Alloy Steel Flat Bars EN24
  • Alloy Steel Flat Bars EN24
Get Best Quote
Approx. Price: Rs 105 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity100 Kilogram
Single Piece Length6 m-18 m
Tensile strength570 MPa
Thickness20-350 mm
Density7.80 g/cm3
Hardness167
Country of OriginMade in India

We are a top-notch Manufacturer and Exporter of Alloy Steel Flat Bar from Mumbai, India. We are supported by a team of skilled and experienced personnel who makes use of sophisticated machines and latest techniques for its production to make it in accordance with the stated industry norms. Order retail or bulk!

 

More about Alloy Steel Flat Bar

  • Steel Flats are produced on rolling mills utilizing relatively smooth, cylindrical rolls. The width to thickness ratio of flat rolled products is usually fairly large. Flats is the spring steel that goes into the automobile and railway suspension. These steel flat bars are produced using advanced thickness-control technology for precisely controlled thickness. Additional sizes are also available upon the client’s request.

 

Mild Steel, Carbon Steel & Alloy Steel Grade - - (IS 2062, L/C, EN8, EN9, EN15, EN45A, Class II, Class IV, 16MnCr5, 20MnCr5, ST52 and other carbon & alloy steel grades). This steel contains various alloying elements like chromium, nickel, molybdenum, vanadium, manganese, silicon, boron etc. depending upon the end usage. Addition of alloys helps in improving mechanical properties such as impact, hardness, tensile strength, yield stress etc. Our steel has diverse applications in manufacture of components for Hand tools like pliers and spanners etc.

 

Special Features

  • Low temperature rolling imparts higher strength to the structures.
  • Pilling and automatic tying of the structurally ensure minimum damage during handling and transport.

Invoicing :
  • As per actual weight.

 

Grades

  • EN45A Flat Bar
  • EN8 Flat Bar
  • C45 Flat Bar

 

Technical Specifications

Size in mm

Size(mm)

21X6

60X5,6,8,10

25X3,4,5,6,8,10,12

70X5,6,8,25

28X6

80x5,6,8,10,25,32

30X3,5

100x5,6,8,10,25,32

32X3,4,5,6,8

110x5,6,8,25,32

40X5,6,8

150x5,6,8,25,32,50

50X5,6,8,25

200x5,6,8,25,32,50,75

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested
X

Product Videos

C67 Steel Sheet

C67 Steel Sheet

Get Best Quote
SS 310MO Pipes

SS 310MO Pipes

Get Best Quote
Watch More Videos

Explore More Products

View All Products




Reach Us
Sanjay Mehta (Sales Manager)
Nextgen Steel And Alloys
47, Navnidhi Bhavan, Shop No. 2, 5th Kumbharwada Lane
Ambewadi, Mumbai - 400004, Maharashtra, India
Get Directions


Call Us


Send E-mail