Stainless Steel Plates

Product Details:

Nextgen Steel & Alloys - Grade 3CR12 stainless steel is a low-cost grade chromium, containing stainless steel fabricated by modifying the properties of grade 409 steel. It resists mild corrosion and wet abrasion. It was originally developed by Columbus Stainless, which designated the registered trademark “3CR12”. Other designations of this grade include UNS S40977/S41003 and 1.4003.

Other designations that are equivalent to grade 3CR12 include ASME SA240 grades, ASTM A240/A240M grades and EN 10088.2. However, grade 1.4003 is also covered in EN 10028.7, which constitutes pressure-purpose stainless steels.

The following section will provide the key properties of grade 3CR12 stainless steel coil, sheet and plate, covered under Euronorm S41003, S40977, ASTM A240/A240M and EN 10088.2 1.4003. 3CR12 is a chromium containing corrosion resisting ferritic steel developed as an alternative material of construction where the mechanical properties, corrosion resistance and fabrication requirements of other materials such as mild steel, galvanised or aluminised steel, aluminium or pre-painted steels are unsuited.

Nextgen Steel & Alloys  - Originally 3CR12 was not included in any international specifications. However, a 12 per cent chromium steel developed from 3CR12 has been designated DIN type 1,4003 and ASTM/ASME 41003. The former has been incorporated into two Euronorm Standards viz. EN 10088 and EN 10028, 3CR12 conforms to the requirements of the above specifications and is multi certifiable to 3CR12, 1.4003 and 41003, due to its inclusion in the above specifications. 3CR12 vessels and tanks can be designed in accordance to BS5500, ASME, AD Merkblatter codes and the Euronorm design specification currently in preparation.

 

Nextgen Steel & Alloys  products stocks and processes 3CR12, a ferritic utility stainless steel that provides the heat- and corrosion-resistance benefits expected from other stainless products, along with additional advantages of weldablity and formability.3CR12 is a chromium-containing stainless. Because it does not depend on alloying elements nickel and molybdenum to lend their stainless properties, 3CR12 offers a cost advantage compared to other corrosion-resisting stainless steels. It also can reduce your product costs through the elimination of protective treatments and corrosion allowances. NEXTGEN STEEL & ALLOYS - Grade 3CR12 stainless steels exhibit scaling resistance between 600 and 750°C in the presence of air, and between 450 and 600°C under stress environments. Grade 3CR12 stainless steels are annealed at temperatures ranging from 700 to 750°C, divided into 25 mm section, and each section is soaked for 1½ h. The material is then allowed to cool. Care should be taken to prevent hardening during heat treatment. The mechanical properties and corrosion resistance characteristics of this grade can be affected by quenching treatments. Welding methods used for austenitic stainless steels can be applied to grade 3CR12 stainless steels. Low heat input techniques, such as GMAW (MIG) and GTAW (TIG), can be considered. During welding, grade 309 filler wire, pre-qualified by AS 1554.6, is preferred. However, grade 308L, 316L, 309Mo and 309L wires have also been employed in many cases. Any discoloration in the welded product can be removed using backing gases, or techniques such as purging and pickling.Grade 3CR12 stainless steel plates can be obtained in standard, hot-rolled annealed and pickled (HRAP) finish, and coils are available in 2B or 2D finish. Black finish can also be produced by hot-rolling the material, leaving behind a dark oxidized surface on the steel. Grade 3CR12 with black finish has a good corrosion resistance and low friction and, hence, it is suitable for different wear applications.

Additional Information:

• Item Code: 3CR12STEELPLATE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 2000M.TONS
• Delivery Time: READY STOCK
• Packaging Details: WOODEN PALLETS, WOODEN BOX

Product Details:

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Product Details:

We offer our esteemed clients with BS 527 Steel Sheets that are manufactured using high grade steel. Our SS round bars are available in various shapes and lengths with dimensional accuracy. Advanced technology is used to design these stainless steel round bars in compliance to the international standards. These are appreciated for their following features:

Nextgen Steel & Alloys is a huge exporter of SS Round bars in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabiaand the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

 

Product Details:

Nextgen Steel & Alloys is a manufacturer of Stainless Steel Balls & also stocks a wide range of stainless steel Balls in 304/304L, 316/316L and 321 plate. These grades are part of the austenitic family of stainless. Austenitic stainless steel is one of the most widely used and versatile type of steel. While 304L stainless steel plates have excellent corrosion resistance, 316/316L plates have higher nickel content than 304 and 304L giving them even better corrosion resistance especially in marine applications. Type 321 ss plates are a good choice for applications where heat is an issue. 321 can be used in applications up to 900 degrees Celsius where 304L is normally used up to 500 degrees Celsius.

Stainless Steel Plate Applications:

• Food Processing and handling
• Heat exchangers
• Chemical process vessels
• Conveyors
• Architectural
• Marine
• Pharmaceutical equipment

Product Details:

Stainless Steel Plate India’s one of Most Favourite 321H Stainless Steel Plate Suppliers, Distributors & Approved Vendor by Government Sector Companies of 321H Stainless Steel Plate, 321H Stainless Steel Sheets, 321H Stainless Steel Coils

 

Alloy 321 (UNS S32100) is titanium stabilized austenitic stainless steel plate with good general corrosion resistance. It has excellent resistance to intergranullar corrosion after exposure to temperatures in the chromium carbide precipitation range of 800 - 1500°F (427 - 816°C). The alloy resists oxidation to 1500°F (816°C) and has higher creep and stress rupture properties than alloys 304 and 304L. It also possesses good low-temperature toughness.

Alloy 321H (UNS S 32109) stainless steel plate is the higher carbon (0.04 - 0.10) version of the alloy. It was developed for enhanced creep resistance and for higher strength at temperatures above 1000oF (537°C). In most instances, the carbon content of the plate enables dual certification.

 

• Alloy 321 stainless steel plates cannot be hardened by heat treatment, only by cold working. It can be easily welded and processed by standard shop fabrication practices
• 321H Stainless Steel Plate, Stainless Steel 321H DIN 1.4301 Sheets & Plates, Stainless Steel 321H Coils, SS 321H Shim Sheets, SS 321H Perforated Sheet Exporters.

 

We are committed to the fast delivery of the 321H Stainless Steel Plate within the country as well overseas shipments.

 

• Stainless Steel Plates Stockiest In India
• Stainless Steel Plates Stockiest In Europe
• Stainless Steel Plates Stockiest In Asia
• Stainless Steel Plates Stockiest In Usa
• Stainless Steel Plates Stockiest In Finland
• Stainless Steel Plates Stockiest In Japan
• Stainless Steel Plates Stockiest In Austria
• Stainless Steel Plates Stockiest In Mumbai
• Stainless Steel Plates Stockiest In Chennai
• Stainless Steel Plates Stockiest In Italy
• Stainless Steel Plates Stockiest In Uae
• Stainless Steel Plates Stockiest In Qatar
• Stainless Steel Plates Stockiest In Oman
• Stainless Steel Sheets Stockiest In India
• Stainless Steel Sheets Stockiest In Europe
• Stainless Steel Sheets Stockiest In Asia
• Stainless Steel Sheets Stockiest In Usa
• Stainless Steel Sheets Stockiest In Finland
• Stainless Steel Sheets Stockiest In Japan
• Stainless Steel Sheets Stockiest In Austria
• Stainless Steel Sheets Stockiest In Mumbai
• Stainless Steel Sheets Stockiest In Chennai
• Stainless Steel Sheets Stockiest In Italy
• Stainless Steel Sheets Stockiest In Uae
• Stainless Steel Sheets Stockiest In Qatar
• Stainless Steel Sheets Stockiest In Oman
• Stainless Steel Coils Stockiest In India
• Stainless Steel Coils Stockiest In Europe
• Stainless Steel Coils Stockiest In Asia
• Stainless Steel Coils Stockiest In Usa
• Stainless Steel Coils Stockiest In Finland
• Stainless Steel Coils Stockiest In Japan
• Stainless Steel Coils Stockiest In Austria
• Stainless Steel Coils Stockiest In Mumbai
• Stainless Steel Coils Stockiest In Chennai
• Stainless Steel Coils Stockiest In Italy
• Stainless Steel Coils Stockiest In Uae
• Stainless Steel Coils Stockiest In Qatar
• Stainless Steel Coils Stockiest In Oman
• Ss321h Plates Stockholder In India
• Ss321h Plates Stockholder In Europe
• Ss321h Plates Stockholder In Finland
• Ss321h Plates Stockholder In Canada
• Ss321h Plates Stockholder In America
• Ss321h Plates Stockholder In Bolivia
• Ss321h Plates Stockholder In Italy

Additional Information:

• Item Code: SS316
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: MUMBAI
• Production Capacity: 500000
• Delivery Time: EX-STOCK
• Packaging Details: WOODEN PALLETS

We supply engineering raw materials to our esteemed customers. If you need to know any information then contact us we will guide you.

Product Details:

We are successfully ranked as the top manufacturer, importer and exporter of Astm A240 Gr. 316/316l Stainless Steel Plates. Offered steel plate is provided on diverse specifications as per the needs of customers. This steel plate is manufactured from the raw material & cutting edge techniques in complete compliance with the set industry norms. The given steel plate is thoroughly tested on several parameters before delivering to customers.

Features:

• Toughness
• Perfect in dimension
• Abrasion resistance

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Additional Information:

• Item Code: SS304
• Port of Dispatch: MUMBAI
• Production Capacity: 250 M.TONS
• Delivery Time: EX-STOCK OR WITHIN 2 - 3 WEEKS
• Packaging Details: WOODEN PALLETS WITH TARPAULIN & IRON STRAP

Product Details:

For the diverse requirements of our clients, we are affianced in manufacturing, importing and exporting an exclusive array of Astm A240 Gr. 316ti Stainless Steel Plates. The offered steel plate is manufactured utilizing optimum quality of raw material and leading technology in adherence to the set quality norms. Our esteemed patrons can avail the offered steel plate from us in various specifications as per their requirements. This steel plate is inspected on assorted quality parameters to ensure its excellence.

Features:

• Abrasion resistance
• Finely finished surface
• Toughness

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
•  Any Profile / Cut Sizes.
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Product Details:

We feel proud to introduce ourselves as the leading manufacturer, importer and exporter of a superior quality Astm A240 Gr. 321/321h Stainless Steel Plates. The offered steel plates are manufactured as per the international quality standards using high quality raw material & contemporary techniques. These steel plates are tested on well-defined quality norms to ensure its excellence. We offer these steel plates on diverse specifications as per the needs of customers.

Features:

• Dimensional accuracy
• High strength
• Anti corrosive

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Product Details:

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Product Details:

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Additional Information:

• Item Code: SS10SHEET
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: MUMBAI
• Production Capacity: 1000 M.TONS
• Delivery Time: EX-STOCK
• Packaging Details: WOODEN BOX, WOODEN PALLETS

Product Details:

Nextgen Steel & Alloys stocks a wide range of stainless steel Rings cutted from Plates in 304/304L, 316/316L and 321 plate. These grades are part of the austenitic family of stainless. Austenitic stainless steel is one of the most widely used and versatile type of steel. While 304L stainless steel plates have excellent corrosion resistance, 316/316L plates have higher nickel content than 304 and 304L giving them even better corrosion resistance especially in marine applications. Type 321 ss plates are a good choice for applications where heat is an issue. 321 can be used in applications up to 900 degrees Celsius where 304L is normally used up to 500 degrees Celsius.

Stainless Steel Plate Applications:

• Food Processing and handling
• Heat exchangers
• Chemical process vessels
• Conveyors
• Architectural
• Marine
• Pharmaceutical equipment

Product Details:

By using 1.4539 (UNS N08904 / 904L / SS2562) you get a high alloyed, acid-proof stainless steel, developed to resist corrosion in dilute sulphuric acid. The steel is very useful for details in marine environment, chemical and pharmaceutical industry.

The steel grade 1.4539 ( also called UNS N08904, 904L and SS2562) is a high alloyed austenitic stainless steel with very good corrosion resistance. The steel is developed to resist corrosion in dilute sulphuric acid and it is suitable to use in details placed in severe corrosion environments e.g. sulphuric acid tanks. It is the combination of high contents of chrome, nickel, molybdenium and cupper which gives the steel the good resistance against uniform corrosion. The steel has also good resistance against crevice corrosion, pitting corrosion, stress corrosion cracking and intercrystalline corrosion

Typical application areas for UNS N08904:

• Marine environment
• Chemical industry
• Pharmaceutical industry
• Food industry

Good formability and weldability

• UNS N08904 is weldable but sensitive to hot cracking. Regarding welding it is important to follow special welding instructions from Avesta Welding. The steel can be both cold- and hot formed, but it can only be hardened by cold working. UNS N08904 is difficult to machine and has a tendency towards work hardening. With the right choise of tool and machine data, fully satisfactoring machining results can be obtained with this grade.

Additional Information:

• Item Code: UNS08904
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Nhava Sheva
• Production Capacity: 200 M.TONS
• Delivery Time: 10 DAYS
• Packaging Details: WOODEN PALLETS

Product Details:

Metals stocks a wide range of stainless steel plates in which Type 321H, is a titanium stabilized austenitic stainless steel that is known for its general corrosion resistance. This higher carbon version of Type 321 stainless steel offers a wide variety of benefits including:

• Excellent resistance oxidation to 1500°F (816°C)
• Good low-temperature toughness
• Comparable corrosion resistance and machinability to Type 304
•  Readily welded by most standard processes

 

For a stainless steel to receive the Type 321H label, it must have the following chemical composition.

It is important to note that Type 321H has a much higher carbon level than Type 321:

• Fe balance
• Cr 17-19%
• Ni 9-12%
• C 0.04-0.10%
• Si 18-20%
• Mn 2% max
• P 0.045% max
• S 0.03% max
• N 0.10% max
• Ti 0.70% max

Our company promise 

• High-quality stainless steel with reasonable price.
• Wide excellent experiences with after-sale service.
• Every process will be checked by responsible QC which ensures every product's quality.
•  Professional packing teams which keep every packing safely.
•  Trial order can be done in one week.
• Samples can be provided as your requirements.
• European Standard Plates Exporters
• SS Plates For U Stamp Jobs
• SS Plates With Marking Traceability
• SS Sheets Stockiest In India
• Stainless Steel Plates Largest Stockholder In Malaysia

Additional Information:

• Item Code: SS321H
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 200 M.TONS
• Delivery Time: EX-STOCK OR WITHIN 3 TO 4 WEEKS
• Packaging Details: WOODEN BOX / PALLETS

Product Details:

ASTM A240 304L|A240 304L plate| A240 304L sheet stainless

 
NEXTGEN STEEL & ALLOYS - ASTM A240 standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications A240 grade 800 800H 904L 201 202 XM-19 XM-31 XM-17 XM-18 XM-19 301 301L 302 304 304L 304H 304N XM-21 304LN 305 309S 309H 309Cb 309HCb 310S 310H 310Cb 310HCb 310MoLN 316 316L 316H 316Ti 316Cb 316N 316LN 317 317l 317LM 317LMN 317LN 321 321H 334 347 347H 348 348H XM-15 2205 2304 255 2507 329 405 409 410 410S 429 430 439 434 436 444 XM-33 XM-27

 

Sheets Stainless Steel 

• ASTM / ASME SA 240 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316 TI, 317, 317L, 321, 321H, 347, 347 H , 409, 410, 410S, 430

Sheets Duplex Steel 

• ASTM / ASME SA 240 UNS NO. S 31803, S 32205, S 32550, S 32750, S 32760

 

NEXTGEN STEEL & ALLOYS  -Sheet & Plates in Stainless Steel, Carbon Steel, Boiler Quality, Alloy Steel, Nickel Alloy, Non Ferrous Metal with 2B, 2D, HR, CR, BA (No. 8), Satin (Met with PVC Coated) Finish in form of Shim Sheet, Coils, Foils, Perforated Sheet, Strip, Flats, Blank (Circle), Ring (Flange), Chequered Plate Etc. with Manufacturer Test Certificate. Stainless Steel Sheets, best quality Stainless Steel Sheets, wide variety of Stainless Steel Sheets, Stainless Steel Sheets India, Stainless Steel Sheets distributor Mumbai, Stainless Steel Sheets traders, prime quality stainless steel Sheets, Source for Stainless Steel Sheets, specialize in Stainless Steel Sheets, Stainless Steel Sheets exporter with Test Certificate in Bharuch.

We would like to establish business relations with reputed concern like yours. We assure you that you will certainly find in our products quality and rate most competitive at right time with excellent services. Your satisfaction is the award for our good quality and service.

NEXTGEN STEEL & ALLOYS  - ASTM A240 standard specification for chromium and chromium-nnickel stainless steel plate, sheet, and strip for pressure vessels and for general applications

Supplementary Technology:

• HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2
• NEXTGEN STEEL & ALLOYS - is specialized in supplying ASTM A240 steel plate in A240 Grade 304L.
• ASTM A240 standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications
• Supplementary Technology:  HIC Test | NACE MR0175 | Z15 | Z25 | Z35 | S1 | S2|
• Gangsteel is specialized in supplyingASTM A240 steel plate inA240 304L. Our gangsteel have min 600Tons stock size for each size stainless steel. We also have cutting factory which could cut stainless component according to our customer requirement. 
•  Our NEXTGEN STEEL & ALLOYS - could provide equipment to check width, length, thickness, and element before delivery for our customer. We promise No large tolerance, No fake material, Better Service, Competitive price.

Additional Information:

• Item Code: ASTMA240TP304L
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: NHAVA SHEVA
• Production Capacity: 20000 M.TONS
• Delivery Time: EX STOCK
• Packaging Details: WOODEN PALLETS, WOODEN BOXES

Product Details:

Owing to our industrial experience and knowledge of this domain, we offer the best quality of Ferritic Stainless Steel Plates. The offered ferritic stainless steel is known for its resistance to corrosion, optimum durability and impact resistance finish. Strong logistic support and a wide distribution network, ensures timely delivery of the offered ferritic stainless steel.

Features:

• High load bearing capacity
• Ability to tolerate high mechanical stress
• Corrosion resistance finish

Grade:

• 409Cb, 409Ti, 430/F, 430LNb, 434

Additional Information:

• Item Code: SS230

Product Details:

Stainless Steel Plate & Sheet Supplier

• Surface:No1,No4, 2B, BA, 8K, etc.
• Standard:ASTM, AISI, JIS, GB, DIN,EN, etc
• Materia:201,202,304,304L,304J1, 316,316L,321,309S,310S,409L, 430
• Technique:Cold Rolled or Hot Rolled
• Certification:ISO,SGS
• Package:Waterproof paper, steel strip packed, wooden case or pack as customers requirement.

Application:

• Used in construction, chemical industry, electricity industry, food service industry, paper-making industry, and so on.

 

NEXTGEN STEEL & ALLOYS Metals stocks a wide range of stainless steel plates & sheets in 304/304L, 304 straight grade, 316/316L and 321 plates.

NEXTGEN STEEL & ALLOYS stocks size from 3/16" to 2" thick x 48" or 60" wide x 96/120/144 lengths of stainless steel sheets & plates. If you are looking for special sizes or DFARS or domestic material, TW Metals has relationships with the domestic mills. We can supply your company with the competitive domestic material in special sizes that may not be available on the floor.

 

Shipping :

• Delivery term: 
• About 25 days after receiving the 30% deposit, or as soon as we receive
• the repayment, we can arrange shipment right now.
• Payment term: 
• T/T, including the 30% deposit after signing the contract and the balance 70% after
• sending the B/L copy.We can also accept L/C, Western Union Etc.
• Stainless steel plate is available in Type 304 and Type 316/316L. Type 316 is a high corrosion resistant alloy. Typical uses include marine, chemical, and food service applications.

Stainless Steel Sheets 

• Type 304 Sheet Polished 240 grit, white poly coat
• Type 316 Sheet Polished 240 grit, white poly coat
• Type 304 Sheet 2B finish
• Type 316 Sheet 2B finish

 

Nextgen Steel & Alloys
Stainless Steel Plates Sources
Quality Approved By Clients All Over The World

• Acroni
• Aperam
• Baosteel
• Ess (eastern Special Stainless)
• Fuxin
• Jfe Steel Corporation
• Jindal Stainless
• Nisshin Steel
• Nssc Japan
• Outokumpu Group
• Posco Group
• Tisco
• Yusco
• Yys (yeou Yih Steel Co., Ltd.)

Additional Information:

• Item Code: SS316L
• Port of Dispatch: MUMBAI
• Production Capacity: 50000 M.TONS
• Delivery Time: EX-STOCK
• Packaging Details: WOODEN PALLETS

Product Details:

To meet the diversified requirements of clients, we are offering a qualitative array of Astm A240 Gr. 304/304l Stainless Steel Plates. The offered steel plate is manufactured in conformity with the set industry standards utilizing the best grade raw material and modernized technology. Furthermore, this steel plate is tested on various quality parameters to ensure flawlessness. In addition to this, we offer this steel plate to our precious clients at very reasonable prices.

Features:

• Sturdiness
• Anti corrosive
• Unmatched quality

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Additional Information:

• Item Code: MO008

Product Details:

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Additional Information:

• Item Code: AISI309
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: MUMBAI
• Production Capacity: 800 M.TONS
• Delivery Time: 3 WEEKS
• Packaging Details: WOODEN PALLETS

Product Details:

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection.
• Origin: Indian, European, USA

Additional Information:

• Item Code: 904L
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: NHAVA SHEVA
• Production Capacity: 100 TONS
• Delivery Time: IMMEDIATE
• Packaging Details: EXPORT WORTHY PACKING

Product Details:

Nextgen Steel & Alloys stocks a wide range of stainless steel Circles cutted from Plates in 304/304L, 316/316L and 321 plate. These grades are part of the austenitic family of stainless. Austenitic stainless steel is one of the most widely used and versatile type of steel. While 304L stainless steel plates have excellent corrosion resistance, 316/316L plates have higher nickel content than 304 and 304L giving them even better corrosion resistance especially in marine applications. Type 321 ss plates are a good choice for applications where heat is an issue. 321 can be used in applications up to 900 degrees Celsius where 304L is normally used up to 500 degrees Celsius.

Applications:

• Food Processing and handling
• Heat exchangers
• Chemical process vessels
• Conveyors
• Architectural
• Marine
• Pharmaceutical equipment

Product Details:

2024 aluminum is heat-treatable aluminum alloy with copper as the primary alloying element. It is malleable when in the fully soft, annealed temper and can be heat-treated to high strength levels after forming. Due to its high strength to weight ratio, it is widely used in aerospace applications.

Chemical Compostion:- 

Additional Information:

• Delivery Time: Ready Stock
• Packaging Details: Export worthy