Seamless & Welded Butt Weld Fittings

Product Details:

X17CrNi16-2 is a martensitic stainless combining excellent impact strength at high hardness levels with the best corrosion resistance of any martensitic stainless steels. Steel with high polishability. For application up to working temperature 500^oC.

Applications

• X17CrNi16-2 has been successfully used in a variety of aircraft and general industrial applications. These include fasteners, shafts, bolts, valve components and chemical equipment, components for dairies, machine building and paper industry.

Physical properties (avarage values) at ambient temperature

• Modulus of elasticity [10³ x N/mm²]: 216
• Density [g/cm³]: 7.70
• Thermal conductivity [W/m.K]: 25.0
• Electric resistivity [Ohm mm²/m]: 0.70
• Specific heat capacity[J/g.K]: 0.46

Chemical Composition (in weight %)

Product Details:

Since the inception of our company, we manufacture, import and export the best quality of Forged Alloy Steel. Fabricated in harmony with the industry laid regulations, the offered forged alloy steel is known for its corrosion resistance finish and precise dimension. To manage diverse needs of the clients, the offered forged alloy steel is available with us in different sizes and dimensions.

Features:

• Accurate dimension
• High strength
• Durable construction

Product Details:

We NEXTGEN STELL & ALLOYS like to introduce our self, that we are stockiest and exporters of Aramco Approved Flanges.Our Company is Indian Based Company located in Mumbai.

 

In Aramco Flanges, we offer wide range of variety in sizes with Huge & Ready Stock. We supply standard sizes Flanges as per Saudi Aramco Requirement.

 

We supply only prime and good quality materials with Mill test certificates and also we provide third party inspection agency as per our client or consultant requirement.

Flanges:

• Weldneck | Slipon | Blind | Threaded | Flat Face | Spectacle Blind | Socketweld

Standards:

• ASME / ANSI / DIN / JIS / BS / GB
  

Dimensions:

• B16.5 / B16.47 – A105 / A182 / A240

 

Type:

• ANSI, BLRF, Lap Joint, RTJ, SOFF, SORF, SWRF & WNRF

MOC:

• Alloy Steel, Carbon Steel, Duplex, High Nickel Alloys, Mild Steel, Stainless Steel & Super Duplex.
• Prime Materials with EN 10204 Type 3.1 & 3.2 Certificates

 

Mills we offer:
European, Japanese & Korean Make.

 

Industries we Served of Saudi Aramco:

• EPC Contractor
• Fabrication
• Oil & Gas Industries

Above materials can be provided along with third party inspection agencies like DNV, TUV, Veloci, BVS, IRIS, SGS, TECHNIP, TATA, Etc.

Additional Information:

• Item Code: SABICSHELL25

Product Details:

Counted among the invisible manufacturers, suppliers and importers, we are engaged in offering MS Buttweld B/W Fitting. Applicable in automotive and other different sectors, the offered fittings are developed using superior-grade materials that are sourced from accredited vendors. Moreover, these fittings are provided to our clients at market leading prices.

Features:

• Corrosion resistance
• Compact design
• Perfect finish

Additional Information:

• Item Code: KL09
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Product Details:

Understanding the demands of clients in efficient manner, we are engaged in manufacturing, supplying and importing GI Buttweld B/W Fitting. Our offered fittings are developed with the help of modern machinery and cutting-edge technology that is installed at our premises. Owing to our warehouse facility, we have been able to store these products properly.

Features:

• Can withstand high temperature
• High tensile strength
• Low maintenance

Additional Information:

• Item Code: GIFITTING
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Nhava Sheva
• Production Capacity: 100 Tons
• Delivery Time: As per quantity
• Packaging Details: Wodden Packing

Product Details:

Acknowledged in the industry as a prominent manufacturer, supplier and importer, we are engaged in offering Carbon Steel Buttweld B/W Fitting. Demanded for heavy duty industrial applications, the offered fittings are developed in coherence with the industry set guidelines. Prior to dispatch, these fittings are checked thoroughly by our quality controllers.

Features:

• Corrosion resistance
• Abrasion resistance
• Fine finish

Specifications:

Additional Information:

• Item Code: F458

Product Details:

Sanitary ASME BPE and Sanitary Fittings and Tubing Program

• Inventory: Large inventories of sanitary ASME BPE fittings and ASME BPE sanitary tubing as well as food grade sanitary fittings and tube and with a variety of end connections and surface finishes. We stock both buttweld and Tri-Clamp fittings in both 20Ra and 15RA with electropolish surface ID.
• Customer Service: Our sales staff is highly trained to make sure you get exactly what you want and get it in a timely manner. If we happen to be out of a part you are looking for, they have the knowledge to suggest viable substitutes.
• Sourcing: We source our ASME BPE sanitary fittings and tubing from well established, reputable manufacturers. Our primary source for sanitary and BPE fittings is Waukesha. Our primary source for ASME BPE and sanitary tubing is Rath Manufacturing.
• Documentation: We have developed extensive procedures and an electronic data infrastructure to make sure that all of our sanitary fittings and tubing shipments are accompanied with the correct documentation. Our MTR’s are stored electronically. In the event that an MTR’s is lost at a job site, we have the ability to retrieve and e mail a new one in minutes.
• Pre-Inspection Services: We have trained inspectors that can perform and document inbound inspection on BPE fittings and tubing, often eliminating the need to perform this function on the job site. This can eliminate the need to quarantine fittings when they are received at the job site.
• Custom Fittings: If what you are looking for is not an off the shelf part, we have a state of the art in-house stainless steel fabrication facility that can build made to order special sanitary fittings and piping assemblies.

 

ASME BPE and Sanitary Fittings Offerings

• Sanitary ASME BPE fittings, SFF1 and SFF4 both buttweld and sanitary clamp
• Sanitary buttweld and sanitary clamp fittings
• Tube OD weld fittings
• Stock sizes 1/4 inch through 4 inch
• Sanitary fittings and tube up to 12 inch OD is available
• Download Waukesha Sanitary ASME BPE Fittings Brochure
• Download Waukesha Sanitary Fittings Brochure
• Learn More About Holland's Custom and Specialty Fittings
• ASME BPE and Sanitary Tube Offerings
• ASME BPE 316L 15RA electropolished (SFT4)
• ASME BPE 316L 20Ra mechanically polished (SFT1)
• Sanitary 20RA ID 304 and 316L
• Mill finish 304 and 316L
• We stock 1/2 inch through 6 inch
• Download Rath ASME BPE Tube Brochure
• Download Rath True 15 Electropolished Tube Brochure
• Download Rath Standard 20RA Sanitary Tubing Brochure

Sani-Tech Sani-Pro® Piping and Components

Sani-Tech® offers a complete line of high-purity, non-metallic sanitary processing systems and related components, including tubing and fittings, valves, flow measurement components and sight gauges, and sanitary adapters, as well as fabrication equipment for field installation and small-scale bench-top systems for research and process development. These Sani-Pro® piping products are manufactured with polypropylene and Kynar® PVDF — performance-proven materials that meet and/or surpass FDA and USP standards and regulations. Thermoplastic materials have been shown to be less susceptible to biofilm growth than stainless steel, which exhibits a much higher rate of ion contamination.

Additional Information:

• Item Code: 1551
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 1000 METRIC
• Delivery Time: READY STOCK
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

Nextgen Steel & Alloys manufactures a wide range of quality industrial forged steel pressure flanges and fittings including slip-on flanges, socket weld flanges, blind flanges and other shapes for connection applications in the oil, gas, chemical, wind, pharmaceutical and other industries, manufactured in accordance with ASTM, ANSI, ASME, API and other engineering standards.

 

Forged flanges are used as a connection component for pipes, valves, pumps and other equipment to form a pipework system. They provide easy access for cleaning, inspection, modification or repairs. Flanges are usually welded onto pipes or screwed onto a threaded pipe end and then joined with bolts to make the connection. The types of flanges are described and shown below:

Weld Neck Ring Flange (wnrf)

• Slip-on Ring Flange (sorf) Blind Ring Flange (blrf) Socket Weld Ring Flange (swrf) Threaded Ring Flange Lap Joint Ring Flange (ljrf) Ring Type Joint Flange (rtjf)

Additional Information:

• Item Code: FORGEDFLANGES
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Nhava Sheva
• Production Capacity: 100 Tons
• Delivery Time: Ready Stock
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

We NEXTGEN STEEL & Alloys, are one of the Leading Manufactures & Exporters of Alloy Steel Flanges.

Types of Alloy Steel Flanges

• Alloy Steel Socket Weld Flanges,
• Alloy Steel Slip On Flanges
• Alloy Steel Blind Flanges
• Alloy Steel Screwed Flanges
• Alloy Steel Weld Neck Flanges
• Alloy Steel Long Weld Neck Flanges
• Alloy Steel Reducing Flanges
• Alloy Steel Spectacle Flanges
• Alloy Steel Ring Joint Flanges

Flanges:

• Weldneck | Slipon | Blind | Threaded | Flat Face | Spectacle Blind | Socketweld

Standards:

• ASME / ANSI / DIN / JIS / BS / GB - ASTM / ASME A/SA 182 & A 387
• Type: ANSI, BLRF, Lap Joint, RTJ, SOFF, SORF, SWRF & WNRF

 

Types of Grade:

• F1, F5, F9, F11, F12, F22, F91.
• ALLOY STEEL FLANGES SA182 F5 EXPORTERS
• Alloy steel flanges sa182 f5 s
• Alloy steel flanges sa182 f5 approved vendors
• Alloy steel flanges sa182 f5 s in india
• Alloy steel flanges sa182 f5 s in mumbai
• Alloy steel flanges sa182 f5 stockists in mumbai india
• Alloy steel flanges sa182 f5 stockists in india.
• Alloy steel flanges sa182 f5 european makes stockist.

 

We are Aramco & SABIC approved Flanges Exporters and supply flanges from manufacturers already approved by ARAMCO, SABIC, SEC and etc.

• Aramco approved flanges s
• Pdo approved flanges s
• Koc approved flanges s
• Shell approved flanges s
• Saudi aramco approved flanges s
• Bechtel, approved flanges s
• Hyundai heavy industry, approved fittings s
• Hyundai heavy industry, approved flanges s
• Semcorp approved flanges s
• Sabic approved flanges s
• Nigc approved flanges s
• Chemical composition of sa182 f5
• Mechanical properties of sa182 f5
• Chemical & mechanical properties of sa182 f5
• Chemistry of sa182 f5
• Chemical composition & mechanical properties astm a182 f5

Additional Information:

• Item Code: TITANIUMFLANGE45

Product Details:

Compression fittings are used in plumbing and electrical conduit systems to join two tubes or thin-walled pipes together. In instances where two pipes made of dissimilar materials are to be joined (most commonly PVC and copper), the fittings will be made of one or more compatible materials appropriate for the connection. Compression fittings for attaching tubing (piping) commonly have ferrules (or olives in the UK) in them.

Compression fittings are also used extensively for hot and cold water faucets (taps) and toilet stop valves; compression fittings are well suited to this application, as these valves are usually located in confined spaces where copper pipe would be difficult to solder without creating a fire hazard.

Compression fittings are the industry standard for chemical, oil and gas, R&D, Bio-tech, and the semiconductor industry.[citation needed] They are used due to their ability to provide leak-tight seals. These fittings can be remade.

In small sizes, the compression fitting is composed of an outer compression nut and an inner compression ring or ferrule (sometimes referred to as an "olive") that is typically made of brass or copper. Ferrules vary in shape and material but are most commonly in the shape of a ring with beveled edges. To work properly, the ferrule must be oriented correctly—usually the ferrule is fitted such that the longest sloping face of the ferrule faces away from the nut.

When the nut is tightened, the ferrule is compressed between the nut and the receiving fitting; the ends of the ferrule are clamped around the pipe, and the middle of the ferrule bows away from the pipe, making the ferrule effectively thicker. The result is that the ferrule seals the space between the pipe, nut, and receiving fitting, thereby forming a tight joint.

Larger sizes of compression fitting do not have a single nut to compress the ferrule/olive but a flange with a ring of bolts that performs this task. The bolts have to be tightened down evenly.

Thread sealants such as joint compound (pipe dope or thread seal tape such as PTFE tape) are unnecessary on compression fitting threads, as it is not the thread that seals the joint but rather the compression of the ferrule between the nut and pipe. However, a small amount of plumber's grease or light oil applied to the threads will provide lubrication to help ensure a smooth, consistent tightening of the compression nut.

It is critical to avoid over-tightening the nut or else the integrity of the compression fitting will be compromised by the excessive force. If the nut is overtightened the ferrule will deform improperly causing the joint to fail. Indeed, overtightening is the most common cause of leaks in compression fittings. A good rule of thumb is to tighten the nut first by hand until it is too difficult to continue and then tighten the nut one half-turn more with the aid of a wrench; the actual amount varies with the size of the fitting, as a larger one requires less tightening. The fitting is then tested: if slight weeping is observed, the fitting is gradually tightened until the weeping stops.

The integrity of the compression fitting is determined by the ferrule, which is easily prone to damage. Thus care should be taken to when handling and tightening the fitting, although if the ferrule is damaged it is easily replaced.

In a bind, master plumbers have been known to replicate the sealing action of a ferrule by using an artfully "woven" piece of thread seal tape. This is attempted as a temporary solution to prevent a leak until a proper ferrule can be procured.

Additional Information:

• Item Code: 114445454
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY STOCK
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

Stainiless steel 304 is the most versatile and the most widely used of all stainless steels. Its chemical composition, mechanical properties, weldability and corrosion/oxidation resistance provide the best all-round performance stainless steel at relatively low cost. It also has excellent low temperature properties and responds well to hardening by cold working. If intergranular corrosion in the heat affected zone may occur, it is suggested that SS 304L be used.

Typical Applications

• SX 304 is used in all industrial, commercial and domestic fields because of its good corrosion and heat resisting properties.

Some applications include:

• Tanks and containers for a large variety of liquids and solids.
• Process equipment in the mining, chemical, cryogenic, food, dairy and pharmaceutical industries.

Chemical Composition (ASTM A240)

Additional Information:

• Item Code: 4411
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

Gauge Adapters Female ISO Parallel (Gauge) Thread to Male NPT A F flat E D ISO Thread Size in. NPT Size in. Ordering Number Dimensions in. (mm) Pressure Ratings 316 SS A D E F psig (bar) 1/4 1/4 SS-4-AG-4 1.19 (30.2) 0.56 (14.2) 0.22 (5.6) 3/4 5700 (392) 3/8 3/8 SS-6-AG-6 1.27 (32.2) 0.56 (14.2) 0.26 (6.6) 15/16 5700 (392) 1/2 1/2 SS-8-AG-8 1.68 (42.7) 0.75 (19.1) 0.28 (7.1) 1 1/16 3900 (268) Gauge Adapter Gaskets Reducing Adapters Female to Male NPT A F flat E Female NPT Size in. Male NPT Size in. Basic Ordering Number Dimensions in. (mm) Pressure Ratings psig (bar) A E F 316 SS, Steel Brass 1/8 1/16 -2-RA-1 1.09 (27.7) 0.12 (3.0) 9/16 6 500 (447) 3200 (220) 1/4 1/8 -4-RA-2 1.26 (32.0) 0.19 (4.8) 3/4 6 600 (454) 3300 (227) 3/8 1/8 -6-RA-2 1.33 (33.8) 0.19 (4.8) 7/8 5 300 (365) 2600 (179) 1/4 -6-RA-4 1.50 (38.1) 0.28 (7.1) 1/2 1/8 -8-RA-2 1.58 (40.1) 0.19 (4.8) 1/4 -8-RA-4 1.76 (44.7) 0.28 (7.1) 1 1/16 4 900 (337) 2400 (165) 3/8 -8-RA-6 1.75 (44.4) 0.38 (9.6) 3/4 1/4 -12-RA-4 1.85 (47.0) 0.28 (7.1) 3/8 -12-RA-6 1.82 (46.2) 0.38 (9.6) 1 5/16 4 600 (316) 2300 (158) 1/2 -12-RA-8 2.02 (51.3) 0.47 (11.9) 1 1/4 -16-RA-4 1.96 (49.8) 0.28 (7.1) 1/2 -16-RA-8 2.16 (54.9) 0.47 (11.9) 1 5/8 4 400 (303) 2200 (151) 3/4 -16-RA-12 2.17 (55.1) 0.62 (15.7) Heavy-Wall Female to Male NPT 1/2 1/4 SS-8-RA-4-10K 1.81 (46.0) 0.23 (5.8) 1 1/2 10 000 (689) — Female to Male ISO Tapered Thread (RT) Female ISO Thread Size in. Male ISO Thread Size in. Basic Ordering Number Dimensions in. (mm) Pressure Ratings psig (bar) A E F 316 SS, Steel Brass 1/4 1/8 -4-RAT-2RT 1.26 (32.0) 0.19 (4.8) 3/4 6600 (454) 3300 (227) 3/8 1/4 -6-RAT-4RT 1.50 (38.1) 0.28 (7.1) 7/8 5300 (365) 2600 (179) 1/2 1/4 -8-RAT-4RT 1.76 (44.7) 0.28 (7.1) 1 1/16 4900 (337) 2400 (165)Male to Female NPT Bushings A F flat E Male NPT Size in. Female NPT Size in. Basic Ordering Number Dimensions in. (mm) Pressure Ratings psig (bar) A E F 316 SS, Steel Brass 1/8 1/16 -2-RB-1 1.03 (26.2) 0.19 (4.8) 7/16 6 700 (461) 3300 (227) 1/4 1/8 -4-RB-2 1.06 (26.9) 0.28 (7.1) 9/16 6 500 (447) 3300 (227) 3/8 1/8 -6-RB-2 0.86 (21.8) 0.34 (8.6) 11/16 9 200 (633) 4700 (323) 1/4 -6-RB-4 1.19 (30.2) 0.38 (9.6) 3/4 6 600 (454) 3300 (227) 1/2 1/8 -8-RB-2 1.08 (27.4) 0.34 (8.6) 7/8 12 200 (840) 6200 (427) 1/4 -8-RB-4 0.45 (11.4) 8 300 (571) 4400 (303) 3/8 -8-RB-6 1.41 (35.8) 0.47 (11.9) 5 300 (365) 2600 (179) 3/4 1/4 -12-RB-4 1.08 (27.4) 0.45 (11.4) 1 1/16 12 000 (826) 6000 (413) 3/8 -12-RB-6 0.59 (15.0) 8 200 (564) 4300 (296) 1/2 -12-RB-8 1.63 (41.4) 0.62 (15.7) 4 900 (337) 2400 (165) 1 1/4 -16-RB-4 1.37 (34.8) 0.45 (11.4) 1 3/8 14 500 (999) 7400 (509) 3/8 -16-RB-6 0.59 (15.0) 11 600 (799) 5900 (406) 1/2 -16-RB-8 0.73 (18.5) 8 600 (592) 4300 (296) 3/4 -16-RB-12 1.85 (47.0) 0.88 (22.4) 5 300 (365) 2600 (179) Male Thread Size in. Female Thread Size in. Basic Ordering Number Dimensions in. (mm) Uniform O-Ring Size Pressure Ratings 316 SS, Steel A B E F psig (bar) 9/16-18 7/16-20 -6-RBST-4 1.12 (28.4) 0.39 (9.9) 0.28 (7.1) 13/16 -906 4568 (314) 3/4-16 7/16-20 -8-RBST-4 0.98 (24.9) 0.44 (11.2) 0.39 (9.9) 7/8 -908 4568 (314) 9/16-18 -8-RBST-6 1.19 (30.2) 0.44 (11.2) 0.42 (10.7) 1 -908 4568 (314) 7/8-14 9/16-18 -10-RBST-6 1.10 (27.9) 0.50 (12.7) 0.50 (12.7) 1 -910 3626 (249) 3/4-16 -10-RBST-8 1.42 (36.1) 0.50 (12.7) 0.50 (12.7) 1 3/16 -910 3626 (249) 1 1/16-12 3/4-16 -12-RBST-8 1.27 (32.3) 0.59 (15.0) 0.65 (16.5) 1 1/4 -912 3626 (249) 1 5/16-12 1 1/16-12 -16-RBST-12 1.61 (40.9) 0.59 (15.0) 0.87 (22.1) 1 5/8 -916 2900 (199) 1 5/8-12 1 5/16-12 -20-RBST-16 1.98 (50.3) 0.59 (15.0) 1.09 (27.7) 2 1/8 -920 2320 (159) 1 7/8-12 1 5/16-12 -24-RBST-16 1.27 (32.3) 0.59 (15.0) 1.23 (31.2) 2 1/8 -924 2320 (159) Reducers Male to Female SAE/MS St

Additional Information:

• Item Code: 1111
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY STOCK
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

Banking on our vast industry experience, we are engaged in manufacturing, supplying and importing Seamless Butt Weld Fitting. Designed to perfection, our offered fitting is developed in compliance with the industry set guidelines. Apart from this, these fittings are packed properly to ensure safe dispatch at the clients' end.

Features:

• Excellent tensile strength
• Corrosion resistance
• Seamless finish

Additional Information:

• Item Code: ELBOW
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Packaging Details: Wooden Box

Product Details:

Hy-Lok USA, Inc. double ferrule compression tube fittings provide leak-free performance for the most demanding applications.

 

Two ferrule tube fittings are designed and manufactured to meet the rigorous specifications required of industrial applications. Hy-Lok tube fittings are commonly used throughout the oil and gas, pulp & paper, petro-chemical/chemical processing, research laboratories, aerospace and defense, chemical processing, power generation, cryogenic and semiconductor, shipbuilding and heavy industrial industries.

 

Available in numerous configurations and sizes, our tube fittings are made up of four parts consisting of a body, front ferrule, back ferrule, and nut. Outstanding leak-tight connections are consistent as the two-ferrule design compensates for any tolerances in tube outer diameter, wall, thickness, and material hardness.

 

Hy-Lok tube fittings feature a low torque assembly and positive leak free seal for easy assembly and reassembly. During installation the mechanical properties of the tubing are maintained because the back ferrule moves in a controlled manner that does not stress or reduce the inner diameter of the tubing. Since the front ferrule does not force the body to expand the nut can be backed off easily for disassembly and remakes.

 

Constructed of standard materials including 316 stainless steel, brass, and Monel, other materials such as duplex stainless steel, titanium, and carbon steel are available upon request. Heat code traceability for 316 stainless steel and Alloy 400 assures the ratings and quality of each fitting and accounts for code requirements.

 

Fitting size range from 1/16″ thru 2″ (2 mm thru 38 mm O.D.tubing) with numerous choices in end connections and patterns. They are rated to the maximum working pressure of the recommended tubing. Hydraulic swaging tools (EZY-MAT) are provided for easy installation.

Hy-Lok tube fittings are manufactured to Hy-Lok’s stringent quality control program and standards which assure the highest quality available in the industry. We are a global industry leading provider of fitting solutions and have obtained ASME Quality and ISO 9001:2008 Certifications.

 

To fulfill the need for leak-free gas and fluid containment, our tube fittings are the ideal solution.

Additional Information:

• Item Code: 114544545
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY STOCK
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

With the assistance of our team of professionals, we are engaged in providing an assorted range of Nickel Alloy Buttweld B/W Fitting. The offered fittings are precisely manufactured in compliance with international standards using quality approved mild steel and cutting-edge technology. Further, these fittings are available in varied sizes as per the requirement of clients.

 

Features:

• Accurate dimensions
• Corrosion resistance
• High strength
• Robustness

Product Details:

Nextgen Steel Alloys, An ISO 9001:2008 certified co., was incorporated in the year 2005 with its head office based in Mumbai (India) by dedicated team of qualified and experienced engineers with over a decade of experience in vendor inspection, expediting and plant / shutdown inspection in different parts of India for reputed clients.

 

Nextgen Steel Alloys is a huge exporter of Saudi Aramco Approved Fittings in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabiaand the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

 

Our engineers have been approved by various international O G Companies such as Saudi Aramco, SABIC, KOC, KNPC, PDO Oman, PED KBR to perform inspection of their commodities (Flanges, Buttweld Fittings, Socket Weld Fiitings Forged Fittings, etc).

 

We can provide you with SAUDI ARAMCO APPROVED MANUFACTURER’S FITTINGS with below specifications.

 

Standard : ANSI/ASME, MSS, JIS, DIN, BS etc.

• RANGE : 1/8"NB TO 48"NB IN SCH: 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
• FORM, ELBOW, STUBEND, REDUCER, CAP, UBEND, TEE, NIPPLE, LATERALS, WELDOLET, SOCKOLET, COUPLINGS, HALF COUPLINGS, FORGED FLANGES, ETC.
• TYPE : SEAMLESS / WELDED/ FABRICATED

 Stainless Steel:

• Standard :ASTM / ASME A/SA 403 GR WP "S" "W" " WX"
• Grade : 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L

 

Duplex Steel:

• Standard : ASTM / ASME SA 815
• Grade : UNS NO.S 31803, S 32205

 

Titanium :

• Standard : ASTM / ASME SB363
• Grade : Gr1,Gr2,Gr5,Gr7,G9,Gr12, Gr23

 

Carbon Steel :

• Standard : ASTM A 234 WPB /MSS-SP-75
• Grade : WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 WPHY 70.

 

Low Temperature Carbon Steel:

• Standard : A420 WPL3/A420 WPL6

 

Alloy Steel:

• Standard : ASTM / ASME A/SA 234
• Grade : WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91.

 

Copper Nickel :

• C70600(90:10), C71500(70:30), C71640.

 

Nickel Alloy :

• Standard : ASTM / ASME SB 366
• UNS 10276 (HASTELLOY C 276)
• UNS 2200 (NICKEL 200 )
• UNS 2201 (NICKEL 201 )
• UNS 4400 (MONEL 400 )
• UNS 8020 (ALLOY 20 / 20) CB 3
• UNS 8825 INCONEL (825 )
• UNS 6600 (INCONEL 600)
• UNS 6601 (INCONEL 601 )
• UNS 6625 (INCONEL 625 )
• Other : Customized as Per Drawings
• Test Certificate : Manufacturer Test Certificate as per EN 10204 / 3.1