Nextgen Steel & Alloys
Nextgen Steel & Alloys
Kamathipura, Mumbai, Maharashtra
SEND SMS
SEND EMAIL

Nickel Alloy

Our range of products include nimonic 75 wire, nitronic 60 stainless steel, nitinol wire, hastelloy sheets, alloy 20 round bars and nickel alloy tubes.

Nimonic 75 Wire

Nimonic 75 Wire
  • Nimonic 75 Wire
  • Nimonic 75 Wire
  • Nimonic 75 Wire
Get Best Quote
Approx. Price: Rs 3,000 / KilogramGet Latest Price

Product Details:

Thickness0.10 TO 12MM
ShapeWIRE
MaterialNIMONIC
CustomisationCustomised
GradeNIMONIC 80
BrandEUROPEAN
Diameter0.10 TO 12MM

Nickel Alloy 75/ Nimonic 75®
Technical Data Sheet
Chemical Composition Limits
Weight%NiCrTiCSiCuFeMn
Alloy 75
Nimonic 75
Bal18.9 - 21.00.2 / 0.60.08 / 0.151.0 max0.5 max5.0 max1.0 max

Alloy 75 (UNS N06075, Nimonic 75) is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. Nimonic 75 has good mechanical properties and oxidation resistance at high temperatures. Alloy 75 is most commonly used for sheet metal fabrications which require oxidation and scaling resistance together with medium strength at high operating temperatures. Alloy 75 (Nimonic 75) is also used in gas turbine engines, for components of industrial furnaces, for heat treating equipment and fixtures, and in nuclear engineering.

Typical Mechanical Properties
MaterialTest Temp °FUltimate Tensile Strength (ksi)0.2 % Yield Strength (ksi)Elongation in 2"
Alloy 75 Sheet 1925°F AnnealRoom114.459.431
Alloy 75 Sheet 1925°F Anneal1000105.651.927
Alloy 75 Sheet 1925°F Anneal120069.340.032
Alloy 75 Sheet 1925°F Anneal140041.422.075
Alloy 75 Sheet 1925°F Anneal160020.29.990
Alloy 75 Sheet 1925°F Anneal18009.74.491

Availability
Alloy 75 (Nimonic 75) is available in Bar, Round Bar, Flat Bar, Plate, Strip, Sheet, Wire, Tube, Rod, Forging Stock and Extruded Section. For all stock availability contact Sales for further availability.

Specifications

Rod, Bar, Wire and Forging StockBS HR 5, BS HR 504, DIN 17752, AECMA PrEN2306, AECMA PrEN2307, AECMA PrEN2306, AECMA Pr EN2307, AECMA PrEN2402, ISO 9723, ISO 9724, ISO 9725, MSRR 7004
Plate, Sheet, StripBS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208, MSRR 7104
Pipe and TubeBS HR 403, DIN 17751, AECMA PrEN2294, ISO 6207
OtherDIN 17742, AECMA PrEN2308, Werkstoff Nr 2.4630, W. Nr 2.4951, UNS N06075, Nimonic 75 (tradename), MSRR 7104 and MSRR 7004, AFNOR NC 20T

Services
aircraftmaterials.com.

 

Request
Callback


Additional Information:

  • Item Code: 8888
  • Production Capacity: 1000 TON
  • Delivery Time: READY
Yes! I am interested
View PDF

Nitronic 60 Stainless Steel

Nitronic 60 Stainless Steel
  • Nitronic 60 Stainless Steel
Get Best Quote
Approx. Price: Rs 1,450 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
Material GradeNITRONIC 60
ConditionNew
Shaperound, hex, Square, etc
Diameter0.1MM TO 800MM
Surface FinishRolled
Thickness0.1MM TO 203MM
BrandELECTRALLOY, CARPENTER
StandardASTM
ApplicationOil & Gas Industry

Nitronic® 60, or N-60 is known for its excellent galling resistance, even at elevated temperatures. The additions of 4% silicon and 8% manganese inhibit wear, galling, and fretting. It is commonly used for various fasteners and pins that require strength and resistance to galling. It maintains decent strength up to temperatures of 1800°F and has oxidation resistance similar to that of 309 stainless steel. The general corrosion resistance is between that of 304 and 316 stainless steel.

Chemistry
NiCrMnSiCNSPFe
MIN8.016.07.03.5-0.08---
MAX9.018.09.04.50.100.180.030.06Balance

Specifications


AMS 5848
ASME SA 193, ASME SA 479
ASTM A 193, ASTM A 193 Class 1C, ASTM A 276, ASTM A 479
UNS S21800

 

Inventory

Nitronic® 60 Round Bar

Common Trade NamesN-60 Stainless

 

Features
  • Wear and galling resistant alloy
Applications
  • Fasteners
  • Pins and bushings
  • Wear rails
  • Roller bearings
  • Pump components

Physical Properties

Density: 0.275 lb/inch3
Electrical Resistivity: 589 ohm circ-mil/ft

Request
Callback


Additional Information:

  • Item Code: Nitonic60
  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Port of Dispatch: Nhava Sheva
  • Packaging Details: Wodden Packing
Yes! I am interested

Nitinol Wire

Nitinol Wire
  • Nitinol Wire
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price

Product Details:

Minimum Order Quantity10 Piece
MaterialNitinol Wire
BrandNextgen
Usage/ApplicationShape Memory
Thickness0.15 To 10mm
ShapeWire
LengthCoil
FormWire
I deal inNew Only

Nitinol Wire

WE NEXTGEN STEEL & ALLOYS manufactures wire products from various grades of Nickel-Titanium or Nitinol commonly used in medical applications  (Nitinol #1, Nitinol #2, Nitinol #4 and Nitinol #8) as well as Nitinol #5, Nitinol #6, and Nitinol #9 for other various applications. All grades of Nitinol are available in either the cold worked (CW) condition ready for heat treatment or as straightened super-elastic (SE) wire. A newer technique yielding unique mechanical characteristics for Nitinol  has been developed by Fort Wayne Metals called Dynamic Plateau Strength (DPS). This process is available as well. If you need an exceptionally smooth surface we suggest Silk™ Nitinol Wire, which achieves a surface texture of 3µin RMS without mechanical or electropolishing.

Material: nickel titanium

Brand: european

Color: BRIGHT

Shape COIL FORM

Dimensions: 0.5 MM TO 3 MM

Usage/Application: EXPERIMENTS

Minimum Order Quantity: 1 Meter

WE NEXTGEN STEEL & ALLOYS ARE EXPORTER, MANUFACTURER AND STOCKISTS OF NITINOL WIRE , SHAPE MEMORY ALLOY WIRE, NITINOL MUSCLE WIRE in Mumbai, India, UK, Dubai, Melbourne, Sydney, Abu Dhabi, Sarjah, Jebel Ali, Fujairah, Doha, Muscat, Bangkok, Istanbul, Amman, Jerusalem, Tehran, Jeddah, Riyadh, Dammam, Kuala Lumpur, Malacca, Seoul, Cairo, Alexandria, Tokyo, Shanghai, Jakarata, Shanghai, Cape Town, Europe | USA | UAE, Hamburg, Moscow, Johannesburg,Argentina | Australia | Bahrain  | Belgium| Brazil | Brunei | Bulgaria | Canada | Africa | Chile | China | Colombia | Denmark| Egypt | Europe  | France | Georgia | Germany | Greece | Hong Kong  | Indonesia | Iran | Ireland | Israel | Italy | Japan | New Jersey | Jordan | Kuwait| Lithuania | Luxembourg | Malaysia | Mauritius | Mexico | Myanmar | | Netherlands | New Zealand | Korea | Norway | Oman  | Philippines | Poland | Portugal | Qatar | Romania| Russia | Saudi Arabia | Singapore | South Africa | Georgia | Korea | Spain | Sri Lanka  | Sweden | Switzerland | Taiwan  | Thailand |Turkey| Ukraine | United States| Venezuela | Vietnam | Yemen | 

Request
Callback
Yes! I am interested

Hastelloy Sheets

Hastelloy Sheets
  • Hastelloy Sheets
Get Best Quote
Approx. Price: Rs 250 / PieceGet Latest Price

Product Details:

Minimum Order Quantity05 Piece
GradeC22
Materialhastelloy sheets
Material Gradec276
Thickness0.5mm to 50mm
Sizeany size
ColorGREY
BrandNEXTGEN

 

Hastelloy C276 Sheets

We NEXTGEN STEEL & ALLOYS offer a wide range of Hastelloy C 276 & C22 Sheets that finds application in various industries across the globe.

We NEXTGEN STEEL & ALLOYS are one of the leading stockiest and exporters of Hastelloy C22 Sheet.

This is manufactured from quality raw material, these hastelloy plates & hastelloy sheets are known for its unique features such as tight tolerance, smooth surface and uniform mechanical properties. 
Standard: ASTM / ASME SB 168
Grades: UNS 10276 ( HASTELLOY C 276 )

 

Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. This alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in an as welded condition.

Alloy C-276 also has excellent resistances to pitting, stress-corrosion cracking and oxidizing atmospheres up to 1900 °F. Alloy C-276 has exceptional resistance to a wide variety of chemical environments.Some typical applications include equipment components in chemical and petrochemical organic chloride processes and processes utilizing halide or acid catalysts. Other industry applications are pulp and paper (digesters and bleach areas).

Hastelloy C-276 is a alloy with universal corrosion resistance unmatched by any other alloy. 

Characteristics:

·         Excellent corrosion resistance in reducing environments

·         Exceptional resistance to strong solutions of oxidizing salts, such as ferric and cupric chlorides

·         High nickel and molybdenum contents providing good corrosion resistance in reducing environments

·         Low carbon content which minimizes grain-boundary carbide precipitation during welding to maintain resistance to corrosion in heat-affected zones of welded joints

·         Resistance to localized corrosion such as pitting and stress-corrosion cracking

·         One of few materials to withstand the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide

 

 


Applications:

·         Pollution control stack liners, ducts, dampers, scrubbers, stack-gas reheaters, fans and fan housings

·         Flue gas desulfurization systems

·         Chemical processing components like heat exchangers, reaction vessels, evaporators, and transfer piping

·         Sour gas wells

·         Pulp and paper production

·         Waste treatment

 

Request
Callback


Additional Information:

  • Item Code: HASTELLOY
  • Delivery Time: READY STOCK
  • Packaging Details: WOODEX CRATES
Yes! I am interested

Alloy 20 Round Bars

Alloy 20 Round Bars
  • Alloy 20 Round Bars
Get Best Quote
Approx. Price: Rs 600 / KilogramGet Latest Price

Product Details:

Thickness/Diameter1-2 inch, >4 inch, 2-3 inch, 3-4 inch, 0-1 inch
BrandNextgen Steel & Alloy
Material Grade20
ApplicationConstruction, Manufacturing, School/College Workshop
Single Piece Length18 meter, 6 meter, 3 meter, 36 meter, >36 meter

  1. Alloy 20 is a nickel–chromium–molybdenum stainless steel alloy developed for applications involving sulfuric acid. Its corrosion resistance also finds other uses in the chemical, food, pharmaceutical, power generation, and plastics industries.
  2. Composition
    • Nickel, 32.5–35%
    • Chromium, 19–21%
    • Carbon, 0.06% maximum
    • Copper, 3–4%
    • Molybdenum, 2–3%
    • Manganese, 2% maximum
    • Silicon, 1% maximum
    • Niobium, (8.0 X C), 1% maximum
    • Iron, 31–44% (balance)
    Other names
    • UNS N08020
    • DIN 2.4660.
    • CN7M
    • Carpenter 20 CB 3TM
    • AL 20TM
    • Carlson Alloy C20TM
    • Nickelvac 23TM
    • Nicrofer 3620 NbTM
Request
Callback


Additional Information:

  • Item Code: Alloy20
Yes! I am interested

Nickel Alloy Tubes

Nickel Alloy Tubes
  • Nickel Alloy Tubes
Get Best Quote
Approx. Price: Rs 2,000 / KilogramGet Latest Price

Product Details:

ApplicationDrinking Water, Chemical Handling, Utilities Water, Gas Handling, Food Products
Size/Diameter>4 inch, 1 inch, 1/2 inch, 4 inch, 2 inch, 3 inch
Single Piece Length6 meter, 18 meter, 3 meter, >36 meter, 36 meter
BrandNextgen Steel & Alloy

Keeping the track of latest happening in this domain, we are engaged in offering the best quality of Nickle Alloy Tubes. Rendered by us at cost effective prices, the offered nickel alloy tubes are known for their dimensional accuracy and thermal stability. Designed as per the industry laid norms, the offered nickel alloy tubes are available with us in various specifications.

Features:

  • Corrosion proof
  • Optimum strength
  • Robust construction
Request
Callback
Yes! I am interested
View PDF

Nimonic 80 Round Bar

Nimonic 80 Round Bar
  • Nimonic 80 Round Bar
Get Best Quote
Approx. Price: Rs 4,000 / KilogramGet Latest Price

Product Details:

BrandNextgen Steel & Alloys
Size5 X 5
Single Piece Length6 meter, >36 meter, 36 meter, 3 meter, 18 meter
UsageManufacturing, Construction, Household Repair

Nickel Alloy 80A / Nimonic 80A®
Technical Data Sheet
Chemical Composition Limits
Weight %NiCrTiAlCSiCuFeMnCoBZrS
Alloy 80ABal18.0-21.01.8-2.71.0-1.80.10 max1.0 max0.2 max3.0 max1.0 max2.0 max0.008 max0.15 max0.015 max

Alloy 80A (Nimonic® alloy 80A) is a wrought, age-hardenable nickel-chromium alloy. Alloy 80A is similar to alloy 75 but made precipitation hardenable by additions of aluminium and titanium. Alloy 80A has good corrosion and oxidation resistance and high tensile and creep-rupture properties at temperatures to 815ºC (1500ºF). Vacuum refined versions are also available. Alloy 80A is used for gas-turbine components (blades, rings, discs), bolts, tube supports in nuclear generators, exhaust valves in internal combustion engines and has many other offshore/marine, automotive and electrical applications.

Typical Mechanical Properties
MaterialConditionUltimate Tensile Strength ksiYield Strength ksiElongation on 4D (min)Hardness min
Alloy 80ASolution Annealed & Precipatation Treated (aged)1459020300 HV

Availability
Alloy 80A is available in Round Bar, Flat Bar, Rod, Tube, Plate, Sheet, Strip, Forging Stock and Wire. For all stock availability contact Sales.

Specifications

Alloy 80A Rod, Bar, Wire and Forging StockBS 3076 HR1, ASTM B 637, AECMA PrEn2188, AECMA PrEn2189, AECMA PrEn 2190, AECMA PrEn 2396, AECMA PrEn2397, AIR 9165-37
Alloy 80A Plate, Sheet and StripBS HR 201, AECMA PrEn2191
Alloy 80A Pipe and TubeBS HR 401
Alloy 80A OtherBS HR 601, BS HR1, DIN 17742, AFNOR NC 20TA, UNS N07080, Werkstoff Nr 2.4952, Werkstoff Nr 2.4631, NIMONIC 80a (trademark), MSRR 7095 and MSRR 7011, MSRR 7013, HR201, HR401, HR601, NA20, VAT80A

Many sizes and forms available - Alloy 80A Bar, Alloy 80A Extruded Section, Alloy 80A Tube, Alloy 80A Plate, Alloy 80A Sheet, Alloy 80A Wire.

Services
At Aircraft Materials all stock items can be shipped out within 24 hours, usually within the same day. Even cutting orders for bar or sheet can be processed and dispatched the same day, and for time-critical situations such as AOGs.

 

Request
Callback


Additional Information:

  • Item Code: 11555
  • Production Capacity: 1000 KG
  • Delivery Time: READY AVAILABLE
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested
View PDF

Inconel 825 Alloy Pipe

Inconel 825 Alloy Pipe
  • Inconel 825 Alloy Pipe
Get Best Quote
Approx. Price: Rs 3,000 / KilogramGet Latest Price

Product Details:

BrandNextgen Steel & Alloys
Size/Diameter1/2 inch, 1 inch, >4 inch, 4 inch, 2 inch, 3 inch
Single Piece Length18 meter, 6 meter, >36 meter, 36 meter, 3 meter
ApplicationFood Products, Chemical Handling, Utilities Water, Gas Handling, Drinking Water

Alloy 825 (UNS N08825) is an austenitic nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. It was developed to provide exceptional corrosion resistance in both oxidizing and reducing environments. The alloy is resistant to chloride stress-corrosion cracking and pitting. The addition of titanium stabilizes Alloy 825 against sensitization in the as-welded condition making the alloy resistant to intergranular attack after exposure to temperatures in a range that would sensitize unstabilized stainless steels. The fabrication of Alloy 825 is typical of nickel-base alloys, with material being readily formable and weldable by a variety of techniques

Available tube product forms
  • Straight
  • Coiled
  • Seamless
  • Seam welded and cold redrawn
  • Seam welded, cold redrawn and annealed
Typical Applications
  • Condensers
  • Oil and gas well equipment
  • Hydraulic systems
  • Chemical injection lines
  • Chemical process equipment and vessels
  • Downhole control lines
  • Control and instrumentation
  • Acid Production
  • Nuclear fuel processing
Typical manufacturing specifications
  • ASTM B626
  • ASTM B423
  • ASTM B704
  • Also individual customer specifications.
Industries predominantly using this grade
  • Chemical processing
  • Oil and gas
  • Nuclear and power
TECHNICAL DATAMechanical Properties
TemperAnnealed
Tensile Rm85ksi (min)
Tensile Rm590MPa (min)
R.p. 0.2% Yield35ksi (min)
R.p. 0.2% Yield240MPa (min)
Elongation (2” or 4D gl)30% (min)

Physical Properties (Room Temperature)
Specific Heat (0-100°C)440J.kg-1.°K-1
Thermal Conductivity11.1W.m -1.°K-1
Thermal Expansion14mm/m/°C
Modulus Elasticity196GPa
Electrical Resistivity1.13μohm/cm
Density8.13g/cm3

Chemical Composition (% by weight)
ElementMinMax
C-0.05
Si-0.5
Mn-1
P-0.03
S-0.03
Al-0.2
Cr19.523.5
Cu1.53
FeBalance
Mo2.53.5
N0.150.25
Ni3846
Ti0.601.20
Request
Callback


Additional Information:

  • Item Code: 9999999
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested
View PDF

Inconel 600 Round Bars

Inconel 600 Round Bars
  • Inconel 600 Round Bars
  • Inconel 600 Round Bars
  • Inconel 600 Round Bars
Get Best Quote
Approx. Price: Rs 800 / PieceGet Latest Price

Product Details:

Minimum Order Quantity100 Piece
BrandIndian / Imported (Except Chinese)
Size0.10mm to 250mm
Single Piece Length3 meter, 6 meter
UsageManufacturing, Construction, Household Repair

INCONEL® (nickel-chromium-iron) alloy 600 (UNS N06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability. The limiting chemical composition of INCONEL alloy 600 is shown in Table 1. The high nickel content gives the alloy resistance to corrosion by many organic and inorganic compounds and also makes it virtually immune to chloride-ion stress-corrosion cracking. Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions. The alloy is not precipitation hardenable; it is hardened and strengthened only by cold work. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000°F (1095°C). The alloy is used extensively in the chemical industry for its strength and corrosion resistance. Applications include heaters, stills, bubble towers and condensers for processing of fatty acids; evaporator tubes, tube sheets and flaking trays for the manufacture of sodium sulfide; and equipment for handling abietic acid in the manufacture of paper pulp. The alloy's strength and oxidation resistance at high temperatures make it useful for many applications in the heat-treating industry. It is used for retorts, muffles, roller hearths and other furnace components and for heat-treating baskets and trays. In the aeronautical field, INCONEL alloy 600 is used for a variety of engine and airframe components which must withstand high temperatures. Examples are lockwire, exhaust liners and turbine seals. INCONEL alloy 600 is used in the electronic field for such parts as cathode-ray tube spiders, thyratron grids, tube support members and springs. The alloy is a standard material of construction for nuclear reactors. It has excellent resistance to corrosion by high-purity water, and no indication of chloride-ion stress-corrosion cracking in reactor water systems has been detected. For nuclear applications, the alloy is produced to exacting specifications and is designated INCONEL alloy 600T. Some physical constants of INCONEL alloy 600 are given in Table 2. Thermal properties at low and high temperatures are listed in Table 3. The modulus of elasticity in tension at various temperatures is shown in Table 4. Measurements of total hemispherical emissivity and total normal emissivity are shown in Table 5. The values for physical constants and thermal properties reported here are typical but are not suitable for specification use. Physical Constants and Thermal Properties Table 1 - Limiting Chemical Composition, %

  • Nickel (plus Cobalt) 72.0 min.
  • Chromium 14.0-17.0
  • Iron  6.00-10.00
  • Carbon 0.15 max.
  • Manganese  1.00 max Sulfur 0.015 max.
  • Silicon 0.50 max.
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested
View PDF

Hastelloy X Round Bar

Hastelloy X Round Bar
  • Hastelloy X Round Bar
  • Hastelloy X Round Bar
  • Hastelloy X Round Bar
  • Hastelloy X Round Bar
Get Best Quote
Approx. Price: Rs 1,500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity100 Kilogram
BrandVILLARES, VALBRUNA, CARPENTER
Size/Diameter1/2 inch, 1 inch, 2 inch, 3 inch, 4 inch, >4 inch
Single Piece Length3 meter, 6 meter
ApplicationChemical Handling, Gas Handling

NEXTGEN STEEL & ALLOYS

Strong and Oxidation Resistance

HASTELLOY® X alloy (UNS N06002 (W86002) is a nickel-chromium-iron-molybdenum alloy that possesses an exceptional combination of oxidation resistance, fabricability and high-temperature strength. It has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. X alloy exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600°F (650, 760 and 870°C) for 16,000 hours.

Ease of Fabrication

NEXTGEN STEEL & ALLOYS HASTELLOY® X alloy has excellent forming and welding characteristics. It may be forged or otherwise hot-worked, providing it is held at 2150°F (1177°C) for a time sufficient to bring the entire piece to temperature. As a consequence of its good ductility, HASTELLOY® X alloy is also readily formed by cold- working. All hot- or cold- worked parts should be annealed and rapidly cooled in order to restore the best balance of properties.

The alloy can be welded by a variety of techniques, including gas tungsten arc (GTAW), gas metal arc (GMAW), shielded metal arc (SMAW), and resistance welding.

Additional information regarding fabrication can be found here.

Heat Treatment

Wrought forms of HASTELLOY® X alloy are furnished in the solution heat-treated condition unless otherwise specified. X alloy is typically solution heat-treated at 2150°F (1177°C) and rapid cooled. Bright annealed products are cooled in hydrogen. Annealing at temperatures lower than the solution heat- treating may cause precipitation of secondary phases, which may affect the alloy’s strength and ductility.

Useful for Aircraft, Furnace and Chemical Process Components

X alloy has wide use in gas turbine engines for combustion zone components such as transition ducts, combustor cans, spray bars and flame holders as well as in afterburners, tailpipes and cabin heaters. It is recommended for use in industrial furnace applications because it has unusual resistant to oxidizing, reducing and neutral atmospheres. Furnace rolls of this alloy were still in good condition after operating for 8,700 hours at 2150°F (1177°C). HASTELLOY® X alloy is also used in the chemical process industry for retorts, muffles, catalyst support grids, furnace baffles, tubing for pyrolysis operations and flash drier components.

Other common names: Alloy X, Inconel® HX

 

Hastelloy X is a nickel-chromium-iron-molybdenum superalloy with outstanding high temperature strength, oxidation resistance, and fabricability. Alloy X’s oxidation resistance is excellent up to 2200° F. This nickel steel alloy has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. Matrix stiffening provided by the molybdenum content results in high strength in a solid-solution alloy having good fabrication characteristics. Although this nickel alloy is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres. Two common conditions that often lead to early failure in high temperature alloys, carburization and nitriding, Hastelloy X resists.

Request
Callback


Additional Information:

  • Item Code: C276
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
  • Port of Dispatch: MUMBAI
  • Production Capacity: 2000
  • Delivery Time: READY STOCK
  • Packaging Details: WOODEN BOX
Yes! I am interested

Nickel Alloy Flanges

Nickel Alloy Flanges
  • Nickel Alloy Flanges
Get Best Quote
Approx. Price: Rs 500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
Size>30 inch, 10-20 inch, 5-10 inch, 0-1 inch, 1-5 inch, 20-30 inch
Material StandardASTM A105, ASTM A182, ANSI B16.5, ASTM A351
Rated Pressure (Bar)150 to 2500

Nextgen Steel & Alloys provides Nickel Alloy Flanges and Fittings to many markets. Please give us a shot at your inquiry.

Flanges we also provide:

  • ANSI/ASME FORGED FLANGES
  • MSS-SP-44 FLANGES/ANSI B 16.47 SERIES A
  • API TYPE 6A - RTJ Face Flanges.
  • API-605 FLANGES/ANSI B 16.47 SERIES B
  • A.G.A. ORIFICE UNIONS - Furnished with or without Hardware.
  • ASME BOILER CODE FLANGES
  • CL. 125 LIGHTWEIGHT FLANGES - For low pressure applications.
  • PLATE FLANGES - From 1/4" thru 8" Thick, Including AWWA C-207,and all other
    special designs.
  • ANSI LONG WELDNECKS & SPECIAL BODY CONNECTORS
  • SPECTACLE BLINDS
  • Special Ring Flanges

Materials:

  • CARBON STEEL - ASTM/ASME SA-105, A-350 LF-2, LF-3, A694, SA-516-70, A36
  • CHROME ALLOYS - A-182-F-1, F-5, F-6, F-7, F-9, F-11, F-12, F-22, F-51
  • STAINLESS STEEL - A-182 - F-304, 304L, 316, 316L, 309, 310, 317L, 321, 347,
    Alloy 20
  • ALUMINUM - 1100, 2014, 3003, 5083, 5086, 6061, 7075
  • HASTALLOY - B-2, C-276, G, X
  • INCONEL - 600, 601, 625, 718
  • INCOLLOY - 800, 825
  • MONEL - 400
  • COPPER - C11000
  • NAVAL BRASS - (Bronze)
  • TITANIUM

Full line of Stainless and Alloy Plate Flame Cutting.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
Yes! I am interested
View PDF

Nickel Alloy Sheet

Nickel Alloy Sheet
  • Nickel Alloy Sheet
Get Best Quote
Approx. Price: Rs 850 / KilogramGet Latest Price

Nickel Alloys are named for the significant amount of nickel used as it’s unifying or principal ingredient. Nickel alloys were developed for use in highly corrosive environments or for use in high temperature environments (or both). The addition of other alloys such as Molybdenum, Chromium and Iron modify the alloys for uses.

  • NiChrome 80/20
  • Nickel 200
  • Nickel 201
  • Nickel 205
  • Nickel 270
  • Permanickel 300
  • Monel® 400
  • Monel® 401
  • Monel® 404
  • Monel® K-500
  • Inconel® 600
  • Inconel® 601
  • Inconel® 617
  • Inconel® 625
  • Inconel® 702
  • Inconel® 718
  • Inconel® X-750
  • Incoloy® 800
  • Incoloy® 825
  • Ni-Span C® 902
  • Hastelloy® B-2
  • Hastelloy® B-3
  • Hastelloy® C-276
  • Hastelloy® C-22
  • Hastelloy® C-4
  • Hastelloy® G-3
  • Hastelloy® G-30
  • Hastelloy® X
  • Haynes® 214
  • Haynes® 230
  • Haynes® 242
  • Haynes® 263
  • Haynes® 282
  • Haynes® HR-120
Request
Callback


Additional Information:

  • Minimum Order Quantity: 1 Kilogram
Yes! I am interested

Nickel Alloy Plate

Nickel Alloy Plate
  • Nickel Alloy Plate
Get Best Quote
Approx. Price: Rs 800 / KilogramGet Latest Price
Nickel plate’s superior corrosion resistance and strength makes it ideal for a variety of applications including marine equipment, chemical processing, industrial heating, and waste treatment piping. Available grades include 200, 201, 400, 625, 800, 800H and 825. Hot Rolled, Annealed and Descaled 200: B162, SB162 400: B127, SB127 600: B168, SB168, AMS 5540 601: B168, AMS 5870 625: B443, SB443, AMS 5599 800H/HT: B409, SB409, AMS 5870 825: B424, SB424
Request
Callback


Additional Information:

  • Item Code: Nickel
  • Minimum Order Quantity: 1 Kilogram
Yes! I am interested

Nickel Alloy Strip

Nickel Alloy Strip
  • Nickel Alloy Strip
Get Best Quote
Approx. Price: Rs 1,150 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1 Kilogram
KGS2200

Nickel Alloys are named for the significant amount of nickel used as it’s unifying or principal ingredient. Nickel alloys were developed for use in highly corrosive environments or for use in high temperature environments (or both). The addition of other alloys such as Molybdenum, Chromium and Iron modify the alloys for uses. Nextgen Steel & Alloys stocks the below grades in Nickel Alloys:

  • NiChrome 80/20
  • Nickel 200
  • Nickel 201
  • Nickel 205
  • Nickel 270
  • Permanickel 300
  • Monel® 400
  • Monel® 401
  • Monel® 404
  • Monel® K-500
  • Inconel® 600
  • Inconel® 601
  • Inconel® 617
  • Inconel® 625
  • Inconel® 702
  • Inconel® 718
  • Inconel® X-750
  • Incoloy® 800
  • Incoloy® 825
  • Ni-Span C® 902
  • Hastelloy® B-2
  • Hastelloy® B-3
  • Hastelloy® C-276
  • Hastelloy® C-22
  • Hastelloy® C-4
  • Hastelloy® G-3
  • Hastelloy® G-30
  • Hastelloy® X
  • Haynes® 214
  • Haynes® 230
  • Haynes® 242
  • Haynes® 263
  • Haynes® 282
  • Haynes® HR-120
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),D/A,D/P,T/T (Bank Transfer),Other
Yes! I am interested
View PDF

Monel K500 Round Bars

Monel K500 Round Bars
  • Monel K500 Round Bars
Get Best Quote
Approx. Price: Rs 800 / KilogramGet Latest Price
Type Analysis

Element

Min

Max

Carbon

--

0.25

Nickel Cobalt

63.0 min

Titanium

0.35

0.85

Copper

27.0

33.0

Iron

--

2.00

Silicon

--

0.50

Manganese

--

1.50

Sulfur

--

0.01

Titanium

0.35

0.85

Aluminum

2.30

3.15

Description

Monel nickel-copper alloy K-500 combines the excellent corrosion resistance characteristic of Monel alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanimum to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3(Ti, Al) are precipitated thoughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging.

Application

Typical applications for alloy K-500 are pump shafts and impellers; doctor blades and scrapers; oil-well drill collars and instruments; electronic components; springs; and valve trim.

Corrosion Resistance

The corrosion resistance of Monel alloy K-500 is subtantially equivalent to that of alloy 400 except that, when in the age-hardened condition, alloy K-500 has a greater tendency toward stress-corrosion cracking in some environments. Monel alloy K-500 has been found to be resistant to a sour-gas environment. After 6 days of continuous immersion in saturated (3500ppm) hydrogen sulfide solutions at acidic and basic pH's (ranging from 1.0 to 11.0), U-bend specimens of age-hardened sheet show no cracking. There was some tightly adherent black scale. Hardness of the specimens ranged from 28 to 40 Rc.
The combination of very low corrosion rates in high-velocity sea water and high strength make alloy K-500 particularly suitable for shafts of centrifugal pumps in marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting, but this pitting slows down after a fairly rapid initial attack.

Physical PropertiesDensity, lb/cu in.......................................................................... 0.3054 gram/cc............................................................................ 8.434 Melting Range, °F............................................................... 2400-2460 Modulus of Elasticity, 10(6) psi, Tension..................................... 26.0 Torsion....................................... 9.5 Poisson's Ration............................................................................ 0.32
Request
Callback
Yes! I am interested

Monel R405 Round Bars

Monel R405 Round Bars
  • Monel R405 Round Bars
Get Best Quote
Approx. Price: Rs 800 / KilogramGet Latest Price
Nickel Alloy 405/ Monel R-405

Technical Data Sheet

Chemical Composition Limits
Weight %Ni CoCMnFeSSiCu
Nickel 40563 min0.3 max2.0 max2.5 max0.025 - 0.0600.5 max28.0-34.0

Alloy 405 (UNS N04405) is a nickel-copper alloy with high strength and toughness. Alloy 405 also has excellent corrosion resistance in a range of media including seawater, hydrofluoric acid, sulphuric acid and alkalis. Due to its increased sulfur content Alloy 405 has enhanced machinability. Alloy 405 is chiefly used for automatic screw machine stock and is not generally recommended for other applications.


Typical Mechanical Properties

MaterialForm and ConditionTensile Strength KsiYield Strength (0.2% Offset) KsiElongation (%)Hardness Rockwell B
Alloy 405 Rod and BarAnnealed70-8525-4050-3560-76
Alloy 405 Rod and BarCold- Drawn, As- Drawn85-11550-10535-1585-23C
Alloy 405 Rod and BarHot Finished75-9035-6045-3072-86

Availability
Alloy 405 (UNS N04405) is available in Rod and Bar (Round). For all stock availability contact Sales.

Specification

  • ASME SB 164 Bar and Rod
  • ASTM B 164 Bar and Rod
  • QQ N 281 Bar and Rod
  • AMS 4674 Bar and Rod
  • AMS 7234 Bar and Rod
  • MIL N 894 Bar and Rod
  • NACE MR 01 75 Bar and Rod
  • Monel R405 (tradename) Bar and Rod

Services

At Aircraft Materials we specialise in the rapid turn-around of orders, with most stock items ready for shipping out the same day to anywhere in the world. For time-critical orders, such as AOGs use our AOG service desk, the team are dedicated to processing and dispatching orders on the same day, even for cutting orders on bar and sheet products.

Our expertise in global logistics enables us to source material from anywhere in the world in a matter of days and provide fast shipping solutions to all our customers, whichever country they are in. We use a range of transport partners to ship overnight within the UK and Europe, and offer a full range of logistics solutions from priority express services to more cost-effective economy shipments all around the globe. To find out more about our services click here.

Disclaimer

Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Request
Callback
Yes! I am interested

Nichrome Strips 80:20

Nichrome Strips 80:20
  • Nichrome Strips 80:20
Get Best Quote
Approx. Price: Rs 3,000 / KilogramGet Latest Price

We are engaged in offering a wide range of Nichrome Strips. Catering to various industries, this range is manufactured using qualitative raw-material sourced from the famed vendors. Nichrome is a non-magnetic alloy of nickel, chromium, and often iron. Nichrome products are corrosion-resistant and confer relatively high electrical resistivity. We deliver them as per the exact preferences of our clients.

Features:

  • High performance
  • High specific resistance
  • Excellent strength
    Chemical Composition: 80% Ni, 20% Cr Approx. Melting Point: 1400°C

    Nichrome is used in the explosives and fireworks industry as a bridge wire in electric ignition systems, such as electric matches and model rocket igniters.

    Industrial and hobby hot wire foam cutters use nichrome wire.

    Nichrome wire is commonly used in ceramic as an internal support structure to help some elements of clay sculptures hold their shape while they are still soft. Nichrome wire is used for its ability to withstand the high temperatures that occur when clay work is fired in a kiln.

    Nichrome wire can be used as an alternative to platinum wire for flame testing by coloring the non-luminous part of a flame to detect cations such as sodium, potassium, copper, calcium etc.

    The alloy tends to be expensive due to its high nickel content. Distributor pricing is typically indexed to commodity market prices for nickel.

    Other areas of usage include motorcycle silencers, in certain areas in the microbiological lab apparatus, and as the heating element of plastic extruders by the Rep Rap 3D printing community. For heating, resistance wire must be stable in air when hot. Nichrome wire forms a protective layer of chromium oxide

  • Availability
    Alloy 75 (Nimonic 75) is available in Bar, Round Bar, Flat Bar, Plate, Strip, Sheet, Wire, Tube, Rod, Forging Stock and Extruded Section. For all stock availability contact Sales for further availability.

    Specifications

    Rod, Bar, Wire and Forging StockBS HR 5, BS HR 504, DIN 17752, AECMA PrEN2306, AECMA PrEN2307, AECMA PrEN2306, AECMA Pr EN2307, AECMA PrEN2402, ISO 9723, ISO 9724, ISO 9725, MSRR 7004
    Plate, Sheet, StripBS HR 203, DIN 17750, AECMA PrEN2293, AECMA PrEN2302, AECMA PrEN2411, ISO 6208, MSRR 7104
    Pipe and TubeBS HR 403, DIN 17751, AECMA PrEN2294, ISO 6207
    OtherDIN 17742, AECMA PrEN2308, Werkstoff Nr 2.4630, W. Nr 2.4951, UNS N06075, Nimonic 75 (tradename), MSRR 7104 and MSRR 7004, AFNOR NC 20T

    Services
    At Aircraft Materials all stock items can be shipped out within 24 hours, usually within the same day. Even cutting orders for bar or sheet can be processed and dispatched the same day, and for time-critical situations such as AOGs.

    Thanks to our global logistics network we can source from anywhere in the world in just a few days. We use a range of transport partners to enable us to ship overnight within the U.K. and Europe and provide fast shipping solutions to the rest of the world. If your requirement is urgent we can offer a priority shipping service, but also if time is not so critical we can offer more cost-effective options to ensure you get the best value for money. To find out more about our services click here.

    Disclaimer
    Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Request
Callback


Additional Information:

  • Item Code: 11545454
  • Production Capacity: 100 KG
  • Delivery Time: READYLY AVAILABLE
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested

Nickel Alloy 600

Nickel Alloy 600
  • Nickel Alloy 600
  • Nickel Alloy 600
  • Nickel Alloy 600
Get Best Quote
Approx. Price: Rs 3,000 / KilogramGet Latest Price

Product Details:

TypeRods, Pellets, Bars

Nickel Alloy 600/Inconel 600®
Technical Data Sheet
Chemical Composition Limits
Weight%CSCrCuMnSiNiFe
Nickel Alloy 6000.15 max0.015 max14.0 - 17.00.50 max1.0 max0.50 max72.0 min6 - 10

Nickel Alloy 600 (N06600) is a nickel-chromium-iron alloy with good oxidation resistance at high temperatures and resistance to chloride-ion stress corrosion cracking corrosion by high-purity water, and caustic corrosion. Alloy 600 also has excellent mechanical properties and has a desirable combination of high strength and good workability. Used for furnace components, in chemical and food processing, in nuclear engineering and for the sparking electrodes.

Typical Mechanical Properties
MaterialForm and ConditionTensile StrengthYield StrengthElongation %Hardness, Rockwell
ksiMPaksiMPa
Alloy 600 rod and barCold drawn Annealed80-100550-69025-50170-34555-3565-85B
Alloy 600 PlateHot rolled Annealed80-100550-72530-50205-34555-3565-85B
Alloy 600 SheetCold Rolled Annealed80-100550-69030-45205-31055-3588B max
Alloy 600 Tube and PipeCold Drawn Annealed80-100550-69025-50170-34555-3588B max
Alloy 600 WireCold Drawn Annealed80-120550-83035-75240-52045-20-
Alloy 600 WireCold Drawn No 1 Temper105-135725-93070-105480-72535-15-
Alloy 600 WireSpring Temper170-2201170-1520150-2101035-14505-2-

Availability
Alloy 600 is available in Pipe, Tube, Round Bar, Flat Bar, Sheet, Plate, Strip, Forging stock, Hexagon, Wire, Billet. View Stock List, Plate Stock List or contactSales for further availability.

S 5580 Seamless Tubing

Request
Callback


Additional Information:

  • Item Code: 1188885
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested
View PDF

Nitinol Sheet

Nitinol Sheet
  • Nitinol Sheet
Get Best Quote
Approx. Price: Rs 1,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity500 Piece
BrandJindal
MaterialHigh Nickle Alloy
ShapeSquare

Nitinol's unusual properties are derived from a reversible solid-state phase transformation known as a martensitic transformation, between two different martensite crystal phases, requiring 10,000–20,000 psi (69–138 MPa) of mechanical stress.

At high temperatures, nitinol assumes an interpenetrating simple cubic structure referred to as austenite (also known as the parent phase). At low temperatures, nitinol spontaneously transforms to a more complicated monoclinic crystal structure known as martensite (daughter phase).[8] There are four transition temperatures associated to the austenite-to-martensite and martensite-to-austenite transformations. Starting from full austenite, martensite begins to form as the alloy is cooled to the so-called martensite start temperature, or Ms, and the temperature at which the transformation is complete is called the martensite finish temperature, or Mf. When the alloy is fully martensite and is subjected to heating, austenite starts to form at the austenite start temperature, As, and finishes at the austenite finish temperature, Af.[9]

Thermal hysteresis of nitinol's phase transformation

The cooling/heating cycle shows thermal hysteresis. The hysteresis width depends on the precise nitinol composition and processing. Its typical value is a temperature range spanning about 20-50 K (20-50 °C; 36-90 °F) but it can be reduced or amplified by alloying[10] and processing.[11]

Crucial to nitinol properties are two key aspects of this phase transformation. First is that the transformation is "reversible", meaning that heating above the transformation temperature will revert the crystal structure to the simpler austenite phase. The second key point is that the transformation in both directions is instantaneous.

Martensite's crystal structure (known as a monoclinic, or B19' structure) has the unique ability to undergo limited deformation in some ways without breaking atomic bonds. This type of deformation is known as twinning, which consists of the rearrangement of atomic planes without causing slip, or permanent deformation. It is able to undergo about 6–8% strain in this manner. When martensite is reverted to austenite by heating, the original austenitic structure is restored, regardless of whether the martensite phase was deformed. Thus the name "shape memory" refers to the fact that the shape of the high temperature austenite phase is "remembered," even though the alloy is severely deformed at a lower temperature.[12]

2D view of nitinol's crystalline structure during cooling/heating cycle

A great deal of pressure can be produced by preventing the reversion of deformed martensite to austenite — from 35,000 psi to, in many cases, more than 100,000 psi (689 MPa). One of the reasons that nitinol works so hard to return to its original shape is that it is not just an ordinary metal alloy, but what is known as an intermetallic compound. In an ordinary alloy, the constituents are randomly positioned in the crystal lattice; in an ordered intermetallic compound, the atoms (in this case, nickel and titanium) have very specific locations in the lattice.[13] The fact that nitinol is an intermetallic is largely responsible for the complexity in fabricating devices made from the alloy

Request
Callback


Additional Information:

  • Item Code: 1145450454
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
  • Port of Dispatch: Nhava Sheva
  • Production Capacity: 1 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box.
Yes! I am interested
X

Explore more products



Reach Us
Sanjay Mehta (Sales Manager)
47, Navnidhi Bhavan, Shop No. 2, 5th Kumbharwada Lane
Kamathipura, Mumbai- 400004, Maharashtra, India



Call Us

Share Us

F GT L


Send E-mailSend SMS