|Minimum Order Quantity||2 Kg|
|Width||1500 mm,2000mm. 2500 mm and 3000 mm|
|Length||Up to 12 m|
|Thickness||Up to 250 mm|
|Brand||Essar / Dillimax|
|Material||High Yield Plates|
|Usage/Application||High Yield Services|
|Yield Strength||690 Mpa|
|Surface Finishing||Hot Rolled|
|I deal in||New Only|
We have a large stock of high yield steel plates for engineering applications. The high yield plates are S690QL and S690QL1 to EN 10025-6 with additional stocks with yields at S890QL, S960QL and S1100QL.
These plates are typically used by crane manufacturers, in jackup rigs for the oil and gas industry and in a variety of structures where high yield steel is required for additional strength and/or to save weight.
Due to the materials high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.and it is written down in a variety of ways such as: EN10025 S690QL, EN10025 S690 QL, EN 10025 S690QL, EN 10025 S690 QL
Whilst Dillinger does produce even thicker S690 plates we normally keep up to 250 mm S690 high yield plates in stock. There are, of course, often thicker plates available, but for high availability we prefer to say that 250 mm is what you can expect to find to meet your immediate stock requirements.
We stock both S690QL and S690 QL1 into the higher thicknesses with stock levels above 100 mm focused at 100, 110, 120, 130, 140 and 150 mm. For thicknesses between these there is then a choice of increasing to the next size level or waiting for new delivery from the mil
This large stock of Dillimax plates enables us to offer both a wide choice of individual plates at a particular thickness and dimension – either several plates from the same heat – or where you need very particular values. This can save considerable time talking to several stock holders, each with 1 or 2 plates, trying to meet a project requirement with plates from several mills. High strength quenched and tempered steel plate can be easily welded and fabricated.
We often find that steel plate to EN 10025 S690QL is called different things by different engineers. Plate to this specification and grade is variously described as: