Product Details:
Minimum Order Quantity | 1 Kilogram |
Material | Brass |
Color | Golden |
Brand | Nextgen Steel & Alloy |
Elongation | 20% |
Tensile Strength | 295 Mpa |
Size | 15X15 Feet |
Thickness | 3-200 mm |
The product features very good mechanical properties and corrosion behavior comparable to copper. The low conductivity and the outstanding bending proof performance makes it the favorite choice for heating applications.
Cu |
CuZn10 |
CuZn20 |
CuZn30 |
CuZn37 |
||
Tensile strength |
[N/mm²] |
220-270 |
340-390 |
390-450 |
440-540 |
430-480 |
Yield strength at 1% elongation |
[N/mm²] |
120-180 |
290-340 |
270-390 |
320-420 |
240-310 |
Bending proof performance |
[%] |
100 |
1400 |
1800 |
2700 |
2100 |
Resistance (IACS) |
[%] |
100 |
44 |
32 |
27 |
26 |
Conductivity |
[S*m/mm²] |
58.5 |
25.0 |
19.0 |
16.0 |
15.0 |
Resistivity |
[Ohm*mm²/m] |
0.0171 |
0.0395 |
0.0532 |
0.0625 |
0.067 |
Thermal coefficient of resistance |
[1E-6/K] |
3900-4000 |
1300-1500 |
1300-1500 |
1300-1500 |
1300-1500 |
Solderability |
[-] |
good |
good |
good |
good |
good |
Additional Information:
Product Details:
Usage | Manufacturing, Construction, Household Repair |
Finish | Bright, Polish & Black |
Material | Cupro Nickel |
Material Grade | Cupro Nickel Cu-Ni 90/10 (UNS No. C70600) |
Brand | Nextgen Steel & Alloys |
Form | Square , Round , Hex , Flat, Wire In Black & Bright Finish |
Length | 100 mm to 3660 mm |
Thickness | 5 mm To 500 mm |
Element | Cu - Ni 90/10 |
Cu | 88.6 min |
Pb | .05 max |
Mn | 1.0 max |
Fe | 1.8 max |
Zn | 1 max |
Ni | 9-11 max |
Element | Copper Nickel Cu-Ni 90/10 |
Density | 8.1 g/cm3 |
Melting Point | 1443 °C (2430 °F) |
Tensile Strength | Psi -80,000, MPa -551 |
Yield Strength (0.2%Offset) | Psi - 35,000, MPa - 241 |
Elongation | 30% |
Additional Information:
Product Details:
Material | Cupro Nickel |
Brand | Nextgen Steel & Alloy |
Single Piece Length | 100 mm TO 6000 mm. |
Purity | 99.97 % |
Finishing | Bright, Polish & Black |
Density | 0.270 lb/inch3 |
Thickness | 5 mm To 500 mm |
Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
Nextgen Steel & Alloys offers a widespread range of Copper Nickel 70 / 30 Round Bars to clienteles. Cu-Ni 70 / 30 Round Bars (UNS C71500) are used in chemical processing, cooling plant and heat exchanger, evaporator tubes, refrigerator, condenser components and distiller tubes. Temperatures between 927 and 1038 Degree C (1700 Degree F and 1900 Degree F) are suitable for Cupro Nickel 70 / 30 Rods. The small iron content, gives the Copper Nickel 70 / 30 Rods an extraordinary resistance to general corrosion and stress corrosion cracking, making it very suitable and ideal for the marine or industrial industries. We are a known exporter, supplier and manufacturer of these products that offer in different sizes and shapes to our clienteles. These Cu-Ni 70 / 30 Rods are also being offered at cost-effective rates.
Specifications:
Cupro Nickel 70/30 Round Bars |
ASTM B111 Cu-Ni 70/30 Bars |
Cu-Ni 70/30 Rods |
Cupro Nickel UNS C71500 Bright Bar |
70/30 Cupro Nickel Hex Bar |
Cupro Nickel DIN 2.0882 Round Bars |
70/30 Cu-Ni Hot Rolled Round Bar Suppliers |
Copper Nickel 70/30 Forged Round Bars Exporter |
Copper Nickel 70/30 Cold Drawn Bars |
Ultimate Tensile Strength (N/mm²) |
Proof Stress (N/mm²) |
Elongation (%) |
Hardness (HB) |
310 |
|
27 |
80-120 |
Additional Information:
Product Details:
Thickness | 1 mm To 160 mm |
Shape | Rectangular |
Size | 10-10 Feet |
Usage/Application | Industrial |
Material | Copper |
Brand | Nextgen Steel & Alloy |
Elongation | 30% |
Tempering Temperature | 280 Degree C |
Density | 7.80 g/cm3 |
C11000 Electrolytic Tough Pitch, known as ETP Copper or tough pitch copper, has long been the standard type of commercial wrought copper used in the production of sheet, plate, bar, rod, strip and wire. Although ETP Copper is not 100% oxygen free, it is considered to be an OFC (oxygen free copper) because it has a minimum conductivity rating of 100% IACS while the minimum rating to considered OFC is 99.9% pure. ETP Copper is the most common and widely used copper because of its conductivity. ETP Copper 110 has an extremely wide range of applications based on its conductivity, corrosion resistance, workability, and beauty.
ETP COPPER APPLICATIONS
Farmer’s Copper Ltd. maintains an extensive inventory of etp tough pitch copper in the sheet, plate, rod, and bar variety, and can provide material cut to your specifications on our bar saws, shears, precision plate saw, and water jet cut. Contact one of our professional sales staff today and let us help you with your tough pitch (ETP) copper needs.
Chemical Composition |
||
(%max., unless shown as range or min.) |
||
Cu(1) |
O |
|
Min./Max. |
99.90 min |
- |
Nominal |
- |
0.04 |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Packaging Type | WOODEN |
Grade | AZ61 |
State | Solid |
Length | AS PER REQUIREMENT |
Brand | NEXTGEN |
Color | BRIGHT |
Material | MAGNESIUM |
Magnesium is a silvery-white metal which is used as an alloy element for zinc, lead, aluminum, and other nonferrous alloys. Magnesium alloys are light weight and feature superior machinability and ease of casting. They are often anodized to enhance their corrosion resistance property. They are designated using the ASTM and SAE system in which the first part denotes the two main alloying elements in the alloy and the second part represents their percentages.
The following datasheet gives an overview of magnesium AZ61 alloy.
Element | Content (%) |
Magnesium, Mg | 92 |
Aluminum, Al | 5.80 - 7.20 |
Zinc, Zn | 0.40 - 1.50 |
Manganese, Mn | 0.15 |
Silicon, Si | 0.1 |
Copper, Cu | 0.05 |
Nickel, Ni | 0.005 |
Iron, Fe | 0.005 |
he physical properties of magnesium AZ61A alloy are given in the following table.
Properties | Metric | Imperial |
---|---|---|
Density | 1.80 g/cm3 | 0.0650 lb/in³ |
The mechanical properties of extruded magnesium AZ61A alloy are outlined in the following table.
Properties | Metric | Imperial |
---|---|---|
Tensile strength | 310 MPa | 45000 psi |
Yield strength (@ strain 0.200%) | 230 MPa | 33400 psi |
Compressive yield strength (at 0.2% offset) | 130 MPa | 18900 psi |
Ultimate bearing strength | 470 MPa | 68200 psi |
Bearing yield strength | 285 MPa | 41300 psi |
Shear strength | 140 MPa | 20300 psi |
Shear modulus | 17 GPa | 2470 ksi |
Elastic modulus | 44.8 GPa | 6498 ksi |
Poisson's ratio | 0.35 | 0.35 |
Elongation at break (in 50 mm) | 16% | 16% |
Hardness, Brinell (500 kg load, 10 mm ball) | 60 | 60 |
Hardness, Knoop (estimated from Brinell) | 80 | 80 |
Hardness, Vickers (converted from Brinell hardness) | 68 | 68 |
Machinability (relative rating, 100=best) | 100 | 100 |
Charpy impact | 4.10 J | 3.02 ft-lb |
The thermal properties of magnesium AZ61A alloy are highlighted in the following table.
Thermal Properties | Metric | Imperial |
---|---|---|
Thermal expansion co-efficient (@ 0-100°C/32-212°F) | 26 µm/m°C | 14.4 µin/in°F |
Thermal conductivity (estimated from trends in similar Mg alloys) | 70 W/mK | 486 BTU in/hr.ft²°F |
Other designations equivalent to magnesium AZ61 alloy include ASTM A176.
Additional Information:
Product Details:
Minimum Order Quantity | 1 Kilogram |
Material | Brass |
Wall Thickness | 1 mm To 60 mm |
Shape | Round |
Size/Diameter | 1/2 inch, 2 inch, 1 inch |
Application | Drinking Water, Gas Handling, Chemical Handling |
Single Piece Length | 3 meter, 6 meter, 18 meter |
Additional Information:
Product Details:
Wall Thickness | 1 mm To 60 mm |
Outside Diameter | 6 mm To 850 mm |
Material | Cupro Nickel |
Single Piece Length | 3 meter, 6 meter |
Application | Utilities Water, Food Products, Gas Handling, Chemical Handling, Drinking Water |
Size/Diameter | >4 inch, 2 inch, 4 inch, 1 inch, 3 inch, 1/2 inch, 10 Inch |
Nextgen Steel & Alloys maintains a broad inventory of Copper Nickel, also known as cupro nickel, C70600 (90/10) and C71500 (70/30) in pipe form. Our inventory of ASTM B466/ASME SB466 is composed of C706 in SCH 40 & 80, along with Class 200, in addition to C715 in SCH 80. The C706 Copper Nickel pipes are either annealed, light drawn or hard drawn whereas the C715 pipes are annealed or hard drawn.
Copper Nickel pipes are commonly used in seawater piping due to its complete resistance to barnacles and other marine organisms. Its resistance makes seawater fire fighting systems, desalination water systems, and similar applications much more reliable.
Copper Nickel Pipe Applications
Farmer’s Copper Ltd. can cut material to fit your specifications on our bar saws, precisions, plate saws, shears, and water jets. Contact one of our experts today to find out how we can help meet your copper nickel piping needs.
Additional Information:
Product Details:
Usage/Application | Hardware Fitting |
Size | 1mm to 100mm |
Material Grade | IS319 TYPE 1, IS319 TYPE 2 |
Material | Brass, Copper, Steel |
Rod Length | 12 Feets |
Tensile Strength | 295 Mpa |
Elongation | 20% |
Temperature | 280 Degree C |
Free Cutting Brass |
||||||||||||
|
||||||||||||
|
||||||||||||
Forging Brass |
||||||||||||
|
||||||||||||
|
||||||||||||
Lead Free Brass |
||||||||||||
|
||||||||||||
|
||||||||||||
Naval Brass |
||||||||||||
|
||||||||||||
|
||||||||||||
High Tensile Brass |
||||||||||||
|
Additional Information:
Product Details:
Minimum Order Quantity | 1 Kg |
Wire Gauge | 0-5 |
Material | Copper |
Diameter | 0.1 - 500MM |
Size | 0.10MM TO 500MM DIA,0.10MM TO 200MM THICK PLATES |
Shape | ROUND BAR & PLATES |
Brand | NEXTGEN STEEL AND ALLOYS |
Color | YELLOW |
End Product | Specification |
Bar | AMS 4650, 4651, 4533, ASTM B194, B196, MILITARY MIL-C-21657, SAE J463, J461 |
Extrusions | ASTM B570 |
Forgings | AMS 4650, ASTM B570 |
Plate | ASTM B194 |
Rod | AMS 4650, 4534, 4533, 4651, ASTM B196, MILITARY MIL-C-21657, SAE J463, J461 |
Rod, Forging | AMS 4650 |
Sheet | ASTM B194 |
Strip | ASTM B194, SAE J463, J461 |
Tube, Seamless | AMS 4535, ASTM B643 |
Wire | AMS 4725, ASTM B197, SAE J463, J461 |
AL | BE | CO | CU | SI | |
Min/Max | 0.2 | 1.8 - 2.0 | 0.20 min | Rem | 0.2 |
Nominals | - | 1.9 | - | 98.1 | - |
Additional Information:
3.6/5
Rated by 55 Users