Nextgen Steel & Alloys
Nextgen Steel & Alloys
Kamathipura, Mumbai, Maharashtra
GST No. 27ATYPM1096M1ZP
TrustSEAL Verified
SEND SMS
SEND EMAIL

Alloy Steel

Our range of products include alloy steel plate, en30b round bars, en39b round bars, inconel wire, hss sheet and en24 flats bar.

Alloy Steel Plate

Alloy Steel Plate
  • Alloy Steel Plate
Get Best Quote
Approx. Price: Rs 90 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity50 Kilogram
Thickness10-350 mm
BrandNextgen Steel & Alloy
Size10-5 Feet
MaterialAlloy Steel
Usage/ApplicationIndustrial
ShapeRectangular
Density7.80 g/cm3
Elongation20%
Hardness70 HB
Tensile Strength295 Mpa
KGS9000

Alloy steels are alloys that have been developed to improve critical properties of steel. As plates, these include strength, hardness, toughness, wear resistance and corrosion resistance.  Many of the alloy steels are easy to machine, stamp and fabricate and can be manufactured to precise tolerances.

 

Alloy steel plates are defined as steel plates with a definite range or definite minimum quantity of additional elements, depending on the alloy.  Common alloying elements include:

  • Aluminum
  • Boron
  • Chromium up to 3.99%
  • Cobalt
  • Columbium
  • Molybdenum
  • Nickel
  • Titanium
  • Tungsten
  • Vanadium
  • Zirconium.

 

O'Neal stocks a variety of alloy steel plate products in the hot rolled condition, including 100KSI, A514 and AR400, AR450 and AR500.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested

EN30B Round Bars

EN30B Round Bars
  • EN30B Round Bars
Get Best Quote
Approx. Price: Rs 250 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity50 Kilogram
Usage/ApplicationIndustrial
ShapeRound
Surface FinishGalvanized
MaterialSS
Material GradeEN30B
Single Piece Length3 meter, 6 meter, 18 meter, 36 meter, >36 meter
BrandNextgen Steel & Alloy
Thickness/Diameter2-3 inch, 0-1 inch, >4 inch, 3-4 inch, 1-2 inch, 10 Inch

EN30B steel stockholders and suppliers, delivering to the whole of the India. EN30B is widely used for plastic moulds, but is also suitable for many other applications. The hardening treatment is relatively simple, quenching in air or oil from 810-830°C followed by tempering, with excellent mechanical properties being obtained. Owing to its strength this steel can be used for compression and transfer moulding as well as injection moulding and the relative freedom from distortion makes it superior to case hardening steels for complex mould applications. With limited availability of certain sizes in EN30B West Yorkshire Steel can also offer ‘high carbon’ EN30B to grade X45NiCrMo4. EN30B will machine readily in the annealed condition in which it is supplied.


Chemical Composition of EN30B
Analysis Carbon 0.26-0.34% Silicon 0.10-0.35%
Nickel 3.90-4.30% Manganese 0.40-0.60%
Chromium 1.10-1.40% Phosphorous 0.050% max
Molybdenum 0.20-0.40% Sulphur 0.050% max


Applications EN30B alloy steel can be used for many purposes where toughness and high tensile strength are requirements. For example: components of small presses including anvils, collars, strikers or hammers, rams or punch holders. Other applications include rivet snaps, air hardening cold chisels, crimping tools, clutch keys, racks, pinions and angle pins for pressure die casting tooling. EN30B will machine readily in the annealed condition in which it is supplied.
Forging Heat the steel carefully to the forging temperature of 1000-1100°C, soak well. After forging, cool slowly in a furnace to 100°C maximum and anneal immediately.

Annealing To obtain the softest condition heat carefully to 630-650°C. Soak for a minimum of 2 hours, then cool in the furnace or in air. It is advisable to repeat this treatment to obtain the best machining characteristics.
Request
Callback


Additional Information:

  • Item Code: 118
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested

EN39B Round Bars

EN39B Round Bars
  • EN39B Round Bars
  • EN39B Round Bars
Get Best Quote
Approx. Price: Rs 250 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity50 Kilogram
Material GradeEN39B
ApplicationSchool/College Workshop, Construction, Manufacturing
Single Piece Length>36 meter, 6 meter, 3 meter, 18 meter, 36 meter
Thickness/Diameter0-1 inch, 1-2 inch, >4 inch, 2-3 inch, 3-4 inch
BrandNextgen Steel & Alloy
Tensile strength570 MPa
Density7.80 g/cm3

Nextgen Steel & Alloys is a stockholder of EN39B Billets & Raw material. We are EN39B case hardening steel suppliers, delivering throughout the India. EN39B is a 4.5% nickel, chromium, molybdenum grade, suitable for case hardening to give a case resistant surface with a high core strength up to 1310 N/mm². This grade is commonly supplied as round bar. EN39A and EN39B are common standards for this grade.


Chemical Analysis:
Carbon 0.12-0.18% Nickel 3.90-4.30%
Manganese 0.25-0.50% Molybdenum 0.15-0.30%
Silicon 0.10-0.35% Sulphur 0.040% max
Phosphorous 0.035% max


Applications As a carburising steel with high core strength it is suitable for heavy duty applications such as roller bearings, shafts and clutch plates.

Heat Treatment Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each EN39 component. Other considerations during the heat treatment process include the type of furnace, quenching medium and the work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of EN39 steel
Request
Callback
Yes! I am interested

Inconel Wire

Inconel Wire
  • Inconel Wire
Get Best Quote
Approx. Price: Rs 5,000 / KilogramGet Latest Price

Product Details:

MaterialInconel
Usage/ApplicationIndustrial
Thickness1.2-44mm
Length10mtrs
BrandNextgen Steel & Alloy
Hardness170 HB
Power/Voltage150voltage
Tensile Strength120-160 MPa

Nextgen Steel is a supplier of Inconel Wires & other Inconel Products.
Request
Callback
Yes! I am interested

HSS Sheet

HSS Sheet
  • HSS Sheet
Get Best Quote
Approx. Price: Rs 950 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Kilogram
Single Piece Length10X5 Feet
ApplicationConstruction
MaterialSS
BrandNextgen Steel & Alloy
Thickness10-350 mm
ShapeRectangular
Surface FinishingPolished
Tensile strength570 MPa
Hardness167
Density7.80 g/cm3

Our enterprise is an affluent exporter and supplier of an extensive array of High Speed Steel Sheet. This sheet is manufactured with high precision under our vendors experts’ guidance using the finest quality steel with the help of advanced technology in adherence with the predefined industry standards. Offered sheet is used widely for making various types of products. Additionally, this High Speed Steel Sheet is highly valued for its excellent thermal property. 

 

Features:

  • Corrosion resistance
  • Excellent strength
  • Light weight
  • Ruggedness
Request
Callback


Additional Information:

  • Item Code: HSS
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested

EN24 Flats Bar

EN24 Flats Bar
  • EN24 Flats Bar
Get Best Quote
Approx. Price: Rs 150 / KilogramGet Latest Price
Product Brochure

Product Details:

MaterialSS
ShapeRectangular
TechniqueHot Rolled
UsageConstruction, Manufacturing, Household Repair
Single Piece Length18 meter, 36 meter, 3 meter, 6 meter, >36 meter
Density7.80 g/cm3
Hardness167 HB
Temperature640 Degree C
Tensile Strength270 Mpa
BrandNextgen Steel & Alloys

EN24 EN24T flat bar and round bar steel stockholders and suppliers, delivering to the whole of the UK. This grade is a nickel chromium molybdenum specification usually supplied hardened and tempered as EN24T or EN24U. EN24T steel is readily machineable and combines a good high tensile steel strength with shock resistance, ductility and wear resistance. It is a widely used engineering steel with a tensile strength of 850/1000 N/mm². It has reasonably good impact properties at low temperatures, whilst it is also suitable for a variety of elevated temperature applications. Flame or induction hardening of EN24T can give a case hardness of 50 HRc or higher.

We welcome export enquiries for alloy steel. Contact our sales office and consult our shipping policy for further details.
Analysis Carbon 0.35-0.45% Silicon 0.10-0.35%
Nickel 1.30-1.80% Manganese 0.45-0.70%
Chromium 0.90-1.40% Phosphorous 0.05% max
Molybdenum 0.20-0.35% Sulphur 0.05% max

Form of Supply:   
  • West Yorkshire Steel are stockholders and suppliers of EN24T flat, round and plate – squares, flats and diameters can be sawn cut to your required sizes. Diameters in EN24T are available bright drawn and black hot rolled. EN24T can be sawn to your required lengths as one offs or multiple cut pieces.
  • Ground steel bar can be supplied, providing a high tensile engineering steel precision ground bar to tight tolerances.
  • Contact our experienced sales team who will assist you with your EN24 alloy steel enquiry.

EN24T Flat Bar:   
  • EN24T flat bar is available cut from large rectangular block, pieces can be cold sawn to your specific sizes.

Applications   
  • EN24 was originally introduced for use in the motor vehicle and machine tool industries for gears, pinions, shafts, spindles and the like. Later its applications became much more extended. Suitable to produce parts for such as locomotives, _cranes, rolling mills, coal cutting machinery etc. where good strength and fatigue resistance is called for. Other applications for EN24 and EN24T are found in die casting and hot metal working, such as die bolsters, racks and pinions, angle pins for pressure die casting, hot stamping dies for aluminium stamping, die beds for steel stamping, lower temperature nut, bolt and rivet heading dies, large section drop forging dies. It is widely used in the plastic and rubber moulding industries for moulds (particularly rubber moulds), hob retaining rings, patens, retaining rings for built up moulds, stop pins for moulds. For moulds EN24 is normally supplies hardened and tempered to ‘T’ condition. If a higher hardness is desired EN24T should be annealed and then heat treated to the required hardness.

Request
Callback


Additional Information:

  • Item Code: 119
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box
Yes! I am interested

Tool Steel S2

Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
  • Tool Steel S2
Get Best Quote
Approx. Price: Rs 250 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1000 Kilogram
ApplicationOil & Gas Industry
ShapeSquare
MaterialCarbon Steel,Stainless Steel,Mild Steel
Thickness40-150 mm
Size3 m,6 m
GradeAISI S2
Purity99.97 %
TypeRod
Density7.72 to 8.0 g/cm3
Tensile strength640 and 2000 MPa.
Temperature25 Degree C

AISI S2 is a Shock-Resisting Steel grade Tool Steel. It is composed of (in weight percentage) 0.40-0.55% Carbon (C), 0.30-0.50% Manganese (Mn), 0.90-1.20% Silicon (Si), 0.30% Nickel (Ni), 0.30-0.60% Molybdenum (Mo), 0.50% Vanadium (V), 0.25% Copper (Cu), 0.03% Phosphorus (P), 0.03% Sulfur (S), and the base metal Iron (Fe). Other designations of AISI S2 tool steel include UNS T41902 and AISI S2.Steel is the common name for a large family of iron alloys. Steels can either be cast directly to shape, or into ingots which are reheated and hot worked into a wrought shape by forging, extrusion, rolling, or other processes. Wrought steels are the most common engineering material used, and come in a variety of forms with different finishes and properties. Tool steels typically have excess carbides (carbon alloys) which make them hard and wear-resistant. Most tool steels are used in a heat-treated state, generally hardened and tempered.

 

The typical elastic modulus of tool steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of tool steels ranges from 7.72 to 8.0 g/cm3. The typical tensile strength varies between 640 and 2000 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions.


Further Information on AISI S2 Tool Steel

Availability

  • Tool Steels S2 is stocked by 0 North American distributors and produced by 2 large mills. Distributors will offer small quantity buys while mills will generally only sell large quantities, with delivery times anywhere from 10 to 50 weeks depending on size and form required
  • For mill (large volume) production click here

 

Request
Callback


Additional Information:

  • Item Code: 245461
  • Production Capacity: 1000 TON
  • Delivery Time: READY STOCK
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box.
Yes! I am interested

S7 Shock Resisting Tool Steel

S7 Shock Resisting Tool Steel
  • S7 Shock Resisting Tool Steel
  • S7 Shock Resisting Tool Steel
  • S7 Shock Resisting Tool Steel
Get Best Quote
Approx. Price: Rs 500 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity1500 Kilogram
Length10-12 Feet
Surface FinishingBlack & Bright
ApplicationDefence
Material GradeS7
AlloyWith Alloy
ShapeRound
MaterialTool Steel
Surface ConditionRolled & Forged
Thickness6 mm To 850 mm
BrandNextgen Steel & Alloy

S7 is a shock resisting tool steel with excellent toughness and high strength, along with medium wear resistance. It has maximum shock resistance and high compression strength, which gives it good deformation resistance in use, while retaining good toughness. S7 is easy to machine in the annealed condition and can be readily heat treated. It can be quenched in air, exhibiting minimal distortion on hardening. S7 also has medium hot work characteristics, making it a versatile tool steel for both cold and warm shock applications, as well as plastic molds that require high hardness. S7 de-carb free is available in rounds, flats and squares, as well as ground flat stock and drill rod.


Analysis:
Carbon (C) Manganese (Mn) Silicon (Si) Chromium (Cr) Molybdenum (Mo) Vanadium (V) Phosphorus (P)

Max

Sulfur (S)

Max

0.45-0.55 0.2-0.8 0.3-1 3-3.5 1.3-1.8 0.2-0.3 0.03 0.03


A.I.S.I. S7 conforms to ASTM A681, ASTM A597

Applications:

Typical applications for S7 tool steel are punches, chisels, blanking dies, forming dies, cold and warm header dies, shears, compression dies, hobbed dies, high hardness plastic molds, zinc die casting dies, gripper dies, etc.

 

Forging:

  • Preheat 1200°-1300°F. Forge at 2000°-2050°F. Stop at 1700°F and cool slowly.


Annealing:

  • 1500°-1550°F, cool slowly to 1000°F, air cool. Brinell 197 max.


Preheating:

  • 1200°-1300°F, prior to hardening.


Hardening:

  • 1750°F. Quench in air if cross section is 2-1/2" or smaller; sections 2-1/2" to 6" should be oil quenched to black (1000°F) followed by air cooling to 150°F. Larger cross sections should be oil quenched to 150°F.


Tempering

  • Double temper one hour per inch of section thickness to desired heating rate of 2 hours per inch. Cool in air to room temperature between the two tempers. Suggested: Cold working applications 400°-500°F. Hot working applications 900°-1000°F.
  • Air Cool Oil Quench Tempering Hardness Hardness Temperature F Rockwell C Rockwell C As Quenched 60 61 200 59.5 60.5 300 58.5 60 400 57 58.5 500 55.5 55.5 600 54 54 700 53.5 53.5 800 52.5 52.5 900 51.5 52 1000 50.5 51.5 1100 48 48.5 1200 37.5 37.5 1300 25.5 26.5

 

Tolerances :
  • S7 de-carb free rounds are produced .015-.035 oversize. S7 de-carb free flats and squares are produced .015-.035 oversize on thickness, and widths are milled or cut oversize sufficiently to clean to nominal size.
  • S7 ground flat stock, produced in standard 18" and 36" lengths, is available in oversize ground (+.010/+.015" on thickness and width).
  • S7 drill rod (36" long standard length and 144" available) tolerances on diameter are as follows:
    .124" rd and less (+/-.0003")
    .125 to .499" rd (+/- .0005")
    .500 to 2" rd (+/-.001")
Request
Callback


Additional Information:

  • Item Code: 4656
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Production Capacity: 1000 METRIC TONS
  • Delivery Time: READY STOCK
  • Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box.
Yes! I am interested

Alloy Steel Wire

Alloy Steel Wire
  • Alloy Steel Wire
Get Best Quote
Approx. Price: Rs 200 / KilogramGet Latest Price
Product Brochure

Product Details:

MaterialAlloy Steel
Usage/ApplicationIndustrial
Thickness1.90mm to 9.50mm
Wire Gauge26SWG TO 10SWG
ColorGray
BrandNextgen Steel & Alloy
Tensile Strength350-550 Mpa
Elongation20%

In Alloy Steels, the addition of various elements in total amounts of 1.0% to 50% by weight is done to improve mechanical properties. Every steel is truly an alloy, but not all steels are called "alloy steels". However, the term "alloy steel" is the standard term referring to steels with other alloying elements in addition to the carbon. As a guideline, alloying elements are added in lower percentages (less than 5%) to increase strength or hardenability.


Grade Specification
S. No.GradeSteel TypeChemical Properties of raw material
% C% Mn% Si% P% S% Cr% B
1 En 8D Alloy Steel Wire 0.35 -0.45 0.60 -0.90 0.05 - 0.35 0.06 max 0.06 max - -
2 En 8A 0.33 -0.38 0.60 -0.90 0.05 -0.35 0.06 max 0.06 max 0.05 max -
3 En 9 0.50 - 0.60 0.50 -0.80 0.05 - 0.35 0.06 max 0.06 max 0.15 - 0.25 -
4 En 18 0.35 -0.45 0.60 -0.95 0.10 -0.35 0.06 max 0.06 max 0.85 -1.15 -
5 En 19 0.35- 0.45 0.50 -0.80 0.1 - 0.35 0.06 max 0.06 max 0.9 -1.20 -
6 4140 0.38 -0.43 0.75- 1.00 0.15 -0.30 0.06 max 0.06 max 0.8 -1.10
7 AISI 1541 0.36 -0.44 1.35 -1.65 0.15 -0.30 0.06 max 0.06 max - -
Request
Callback


Additional Information:

  • Item Code: AlloySteelWire
Yes! I am interested

Alloy Steel Flat Bars

Alloy Steel Flat Bars
  • Alloy Steel Flat Bars
Get Best Quote
Approx. Price: Rs 100 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity20 Kilogram
Usage/ApplicationConstruction
Single Piece Length3m-18 m
Thickness10-350 mm
BrandSAIL/VIZAG/RINL/JINDAL/Mahavir/Vandana Rolling Mill Ltd/Vandana ISPAT LTD/Mahamaya
MaterialAlloy Steel
Elongation20%
ShapeRectangular
Tensile Strength295 Mpa

Our assortment of Alloy Steel Plates is precision made using high grade metal and alloys. To ensure quality standards, industrial steel plates are tested as per the relevant industrial standards. Our range is available in various sizes, dimension, different material, different fitting ends and other related specifications for our clients. 

Our Alloy Steel Plates are procured from distinguished manufacturers who provided us these Alloy Steel Grades in ASTM/ASME standards. Moreover, being a steel plates exporter, we also provide customized options of these tubes to our clients. 

 

Low Alloy Steel enhances the mechanical properties and provides great resistance to corrosion than carbon steel. It varies from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties. In low alloy steel plate, the main function of the alloying elements is to increase hardenability in order to optimize mechanical properties and toughness after heat treatment. The increased strength of this low alloy steel plate means that equipment can be built stronger but lighter, with less steel. 

 

The SA 387 Grade Alloy Steel Plate is primarily used in welded pressure vessels where improved toughness is required. It is a low alloy pressure vessel quality steel for high temperatures. We offer a wide range of plate sizes which are accessible thickness range from 6 to 150 mm. 

 

Chrome Moly Steel Plate is manufactured using chromium and molybdenum elements. The molybdenum element enhances strength and higher working temperatures while the chromium provides outstanding corrosion resistance and oxidation. 

 

EN19 is a high quality, high tensile steel usually supplied readily machine able in T condition, giving good ductility and shock resisting properties combined with resistance to wear. 

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested

Alloy Steel Flat Bars EN24

Alloy Steel Flat Bars EN24
  • Alloy Steel Flat Bars EN24
Get Best Quote
Approx. Price: Rs 105 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity100 Kilogram
Single Piece Length6 m-18 m
Density7.80 g/cm3
Hardness167
Tensile strength570 MPa
Thickness20-350 mm

We are a top-notch Manufacturer and Exporter of Alloy Steel Flat Bar from Mumbai, India. We are supported by a team of skilled and experienced personnel who makes use of sophisticated machines and latest techniques for its production to make it in accordance with the stated industry norms. Order retail or bulk!

 

More about Alloy Steel Flat Bar

  • Steel Flats are produced on rolling mills utilizing relatively smooth, cylindrical rolls. The width to thickness ratio of flat rolled products is usually fairly large. Flats is the spring steel that goes into the automobile and railway suspension. These steel flat bars are produced using advanced thickness-control technology for precisely controlled thickness. Additional sizes are also available upon the client’s request.

 

Mild Steel, Carbon Steel & Alloy Steel Grade - - (IS 2062, L/C, EN8, EN9, EN15, EN45A, Class II, Class IV, 16MnCr5, 20MnCr5, ST52 and other carbon & alloy steel grades). This steel contains various alloying elements like chromium, nickel, molybdenum, vanadium, manganese, silicon, boron etc. depending upon the end usage. Addition of alloys helps in improving mechanical properties such as impact, hardness, tensile strength, yield stress etc. Our steel has diverse applications in manufacture of components for Hand tools like pliers and spanners etc.

 

Special Features

  • Low temperature rolling imparts higher strength to the structures.
  • Pilling and automatic tying of the structurally ensure minimum damage during handling and transport.

Invoicing :
  • As per actual weight.

 

Grades

  • EN45A Flat Bar
  • EN8 Flat Bar
  • C45 Flat Bar

 

Technical Specifications

Size in mm

Size(mm)

21X6

60X5,6,8,10

25X3,4,5,6,8,10,12

70X5,6,8,25

28X6

80x5,6,8,10,25,32

30X3,5

100x5,6,8,10,25,32

32X3,4,5,6,8

110x5,6,8,25,32

40X5,6,8

150x5,6,8,25,32,50

50X5,6,8,25

200x5,6,8,25,32,50,75

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested

S275J0, S275J2, S235JR, S235J0, S235J2 Plates

S275J0, S275J2, S235JR, S235J0, S235J2 Plates
  • S275J0, S275J2, S235JR, S235J0, S235J2 Plates
Get Best Quote
Approx. Price: Rs 50 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1000 Kilogram
ShapeRectangular
Material GradeS235,S275,S355,JO,JR,J2+N
BrandSeverstal (Russia),Nextgen Steel & Alloy
Thickness4-5 mm, 1-2 mm,2-3 mm,3-4 mm,>5 mm,5mm to 305mm thk., 0-1 mm
Size (feet X feet)1250 X 6000,2500 X 12000 mm

Specification:

  • Standard : EN10025-2
  • Steel grade : S275JR, S275J0, S275J2, S235JR, S235J0, S235J2
  • Classification : Non-alloy structural steel
  • Application : Non-alloy steel for structural purposes

 

This are common mild steel/carbon steel plate for structural, manufacturing plant, machinery, mining equipment and Treatment of androgenic alopecia with Propecia vehicles, excavators, loader, bulldozers, crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas, port equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.

 

S275JR and its related series (S275J0, S275J2, S235JR, S235J0, S235J2) are very versatile common mild steel/carbon steel plate for multiple structural applications e.g. manufacturing plant, machinery, mining equipment and vehicles, excavators, loader, bulldozers, crane, mining hydraulic supports, construction, power plant, sugar mill, palm oil mill, oil and gas, port equipments, fans, drilling rigs, power shovel and other structural parts. Heat analysis shall be used to determine the required chemical composition for carbon. Manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test.

S symbol for structural steel

275 indication of cuanto cuesta un lubricante en la farmaciathe min specified yield strength for thickness of under16mm.

  • JR symbol 20 temperature impact test.
  • J0 symbol 0 temperature impact test
  • J2 symbol -20 temperature impact test
Request
Callback


Additional Information:

  • Item Code: S235JR
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
  • Port of Dispatch: NHAVA SHEVA PORT
  • Production Capacity: 50000
  • Delivery Time: 3WEEKS
  • Packaging Details: WOODEN PALLETS
Yes! I am interested

16MN Q345 Alloy Steel Sheets

16MN Q345 Alloy Steel Sheets
  • 16MN Q345 Alloy Steel Sheets
Get Best Quote
Approx. Price: Rs 295 / KilogramGet Latest Price

Product Details:

Minimum Order Quantity500 Kilogram
MaterialAlloy Steel
Usage/ApplicationIndustrial
Material Grade16MN Q345
BrandNextgen Steel & Alloy
Surface FinishingHot Rolled
ShapeRectangular
Length6000MM
Thickness5mm To 130mm

High Yield & High Manganese Steel Plates
Request
Callback


Additional Information:

  • Production Capacity: 2000 M.TONS
  • Delivery Time: READY STOCK
  • Packaging Details: WOODEN PALLETS
Yes! I am interested

Stainless Steel Forged Flanges

Stainless Steel Forged Flanges
  • Stainless Steel Forged Flanges
Get Best Quote
Approx. Price: Rs 410 / PieceGet Latest Price
Product Brochure

Product Details:

Usage/ApplicationIndustrial
ShapeRound
Rated Pressure (Bar)150 to 2500Bar
Material StandardANSI B16.5, ASTM A105, ASTM A351, ASTM A182
Size1/2Inch To 54 Inch
BrandUlma, Viraj

NEXTGEN STEEL & ALLOYS is one of the leading Manufacturers, Supplier and Exporters of High quality Forged Flanges. These Forged Flanges are used as a connection component for pipes, valves, pumps and other equipment to form a pipework system. These flanges are precisely manufactured by our skilled professionals using high quality metal alloys in line with set international standards. These Flanges is available in various size, grades, Specification & thickness as per the clients requirments. We Provide these flanges at market leading rates.


Specifications :

Size

:

½" TO 54"

Pressure Rating

:

150#, 300#, 600#, 900#, 1500#, 2500#

Standards

:

ASME B 16.5, ASME B 16.47, API 6A

Type

:

SORF, WNRF, SWRF, BLRF, Threaded etc.

Specials

:

Spacers, Spectacle Blinds, Drip Rings, RTJ, Tongue, Groove, Orifice, etc.


Grades :

Stainless Steel Forged Flanges :

  • ASTM A182, A240 F 304, 304L, 304H, 316, 316Ti, 316H, 316L, 316LN, 309S, 309H, 310S, 310H,317, 317L, 321, 321H, 347, 347H, 201, 202, 904L


Carbon Steel Forged Flanges :

  • ASTM A105, A-350 LF2 SS400,SF440 RST37.2,S235JRG2,P250GH,C22.8,


Alloy Steel Forged Flanges :

  • ASTM A182 F1,F5,F9,F11,F22,F91


Nickel Alloy Forged Flanges :

  • ASTM SB564, SB160, SB472, SB162 Cupro Nickel (90/10, 70/30, 66/30/2/2), Hastelloy (C-4, C-22, C276, B-2), Nickel (200 / 201 / 205), Monel (400 & K500), Inconel (600, 601, 625 & 825), Incolloy (800, 800H), Alloy 20, Duplex Steel, SS 904L, Titanium (1 & 2) Etc.


Duplex Steel Forged Flanges :

  • ASTM A182, A240 UNS S31803, UNS S32205, UNS S32750, UNS S32950
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested

Alloy Steel Strip

Alloy Steel Strip
  • Alloy Steel Strip
Get Best Quote
Approx. Price: Rs 105 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity50 Kilogram
Thickness0.400 to 12.5 inches
ApplicationAutomobile Industry, Construction, Oil & Gas Industry, Pharmaceutical / Chemical Industry
MaterialAlloy Steel
Hardness70 HB
Tensile Strength295 Mpa
Gauge range0.011 to 0.125 inches

Nextgen Steel & Alloys offers high quality alloy steel AISI/SAE 6150, 5160, 4140, 4142, 4150, and 10B38 Strip Coil to name a few. Materials can be hardened and tempered to meet your specific application requirements. Gauge range is from 0.011 to 0.125 inches in thickness with widths from 0.400 to 12.5 inches depending upon the application. Select from a variety of standard or custom finishes and edging.


Alloy Steel Qualities

Featuring durability, strength, corrosion resistance, ductility and machinability, alloy steel is used by a number of industries such as saw, blade, outdoor power equipment, aerospace, and automotive, to name a few. Customers have used our alloy steel material in the manufacture of products like leaf springs, brake components, compressor parts, and much more.

Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested

Steel Spectacle Flanges

Steel Spectacle Flanges
  • Steel Spectacle Flanges
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price
Product Brochure

Product Details:

MaterialStainless Steel
Material StandardASTM A105, ASTM A182, ASTM A351, ANSI B16.5
BrandUlma
Usage/ApplicationIndustrial
Rated Pressure (Bar)150 to 2500 Class
Size10-20 inch, 1-5 inch, 20-30 inch, >30 inch, 5-10 inch, 0-1 inch
Diameter20-150 mm
Wall Thickness1 mm To 60 mm

A spectacle flange is a specialty flange made of two metal discs attached in the middle by a small section of steel. Spectable flanges get their name because they look like a pair of reading glasses, or spectacles. Spectacle flanges, also known as spectacle blind flanges, are most commonly used on piping systems that need to be separated regularly or where the flow through the systems is regularly stopped. One end of the spectacle flange is solid, while the other end has a hole in the center. The spectacle flange can be rotated to place either the solid or hollow end within the pipe system, thereby opening or closing the flow.


Advantages of Spectacle Flanges 

  • Spectacle flanges require no welding for installation
  • Spectacle flanges from Houston's Buffalo Flange have a wide range of pressure tolerances
  • Buffalo Flange Inc. will manufacture spectacle flanges to your specifications
Request
Callback


Additional Information:

  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
Yes! I am interested

WNRTJ Alloy Flanges

WNRTJ Alloy Flanges
  • WNRTJ Alloy Flanges
Get Best Quote
Approx. Price: Rs 1,200 / PieceGet Latest Price

Product Details:

MaterialStainless Steel
BrandNextgen Steel & Alloy
Usage/ApplicationIndustrial
Size1/2 Inches to 48 Inches
Tensile Strength Mpa85,000 (585) MPA
GradeF1, F5, F9, F11, F12, F22, F91
TypeANSI, BLRF, Lap Joint, RTJ, SOFF, SORF, SWRF & WNRF
DimensionB16.5 / B16.47
Yield Strength Psi Min55,000 (380)
Elongation20%
Hardness179 - 217HB

We NEXTGEN STEEL & Alloys, are one of the Leading Manufacturers & Exporters of Alloy Steel Flanges.


Types of Alloy Steel Flanges

  • Alloy Steel Socket Weld Flanges,
  • Alloy Steel Slip On Flanges
  • Alloy Steel Blind Flanges
  • Alloy Steel Lapped Flanges
  • Alloy Steel Screwed Flanges
  • Alloy Steel Weld Neck Flanges
  • Alloy Steel Long Weld Neck Flanges
  • Alloy Steel Reducing Flanges
  • Alloy Steel Spectacle Flanges
  • Alloy Steel Ring Joint Flanges


Flanges:

  • Weldneck | Slipon | Blind | Threaded | Flat Face | Spectacle Blind | Socketweld


Standards:

  • ASME / ANSI / DIN / JIS / BS / GB - ASTM / ASME A/SA 182 & A 387

 


Type:

  • ANSI, BLRF, Lap Joint, RTJ, SOFF, SORF, SWRF & WNRF

 

Types of Grade

  • F1, f5, f9, f11, f12, f22, f91.
    Alloy steel flanges sa182 f9 s
    Alloy steel flanges sa182 f9 s
    Alloy steel flanges sa182 f9 approved vendors
    Alloy steel flanges sa182 f9 s in India
    Alloy steel flanges sa182 f9 s in Mumbai
    Alloy steel flanges sa182 f9 stockists in Mumbai India
    Alloy steel flanges sa182 f9 stockists in India.

 

Alloy steel flanges sa182 f9 European makes stockist.
We are Aramco & sabic approved flanges s and supply flanges from preparers already approved by Aramco, Sabic, sec and etc.

  • Aramco approved flanges s
  • Pdo approved flanges s
  • Koc approved flanges s
  • Shell approved flanges s
  • Saudi Aramco approved fittings s
  • Saudi Aramco approved flanges s
  • Bechtel approved flanges s
  • Hyundai heavy industry approved fittings s
  • Hyundai heavy industry, approved flanges s
  • Semcorp approved flanges s
  • Sabic approved flanges s
  • Nic approved flanges chemical composition of sa182 f22
  • Chemical composition of sa182 f9
  • Mechanical properties of sa182 f9
  • Chemical & mechanical properties of sa182 f9
  • Chemistry of sa182 f9
  • Chemical composition & mechanical properties ASTM a182 f9

ELEMENT & PROPERTIES

MEDIUM ALLOY STEEL

F9

CARBON

0.15 MAX

MANGANESE

0.30-0.60

PHOSPHORUS MAX

0.03

SULFUR MAX

0.03

SILICON

0.50-1.00

CHROMIUM

8.0-10.0

MOLYBDENUM

0.90-1.10

TENSILE STRENGTH PSI (MPA)

85,000 (585)

YIELD STRENGTH PSI MIN

55,000 (380)

ELONGATION 2” % MIN

20

REDUCTION AREA % MIN

40

HARDNESS (HB) MAX*

179 ~ 217

Request
Callback


Additional Information:

  • Item Code: WNRTJALLOY88
Yes! I am interested
X

Explore More Product



Reach Us
Sanjay Mehta (Sales Manager)
Nextgen Steel & Alloys
47, Navnidhi Bhavan, Shop No. 2, 5th Kumbharwada Lane
Kamathipura, Mumbai - 400004, Maharashtra, India



Call Us


Send E-mailSend SMS