Alloy Steel Plates

Product Details:

We Nextgen Steel & Alloys Are The Major Stockist Of 16Mnq345 Plates In India

 

We Stock These Plates N Variety Of Thickness Starting From 2.5Mm To 300Mm Thk.

• 16Mnq345 Supplier
• 16Mnq345 Plates Supplier
• 16Mnq345 Plates Stockist
• 16Mnq345 Plates Exporter
• 16Mnq345 Plates Dealer
• 16Mnq345 Plates In Mumbai
• 16Mnq345 Plates Stockist In Mumbai
• Zgmn 13_4 Plates Supplier
• Zgmn 13_4 Plates Stockist
• Zgmn 13_4 Plates Exporter
• Zgmn 13_4 Plates Dealer
• Zgmn 13_4 Plates In Mumbai
• Zgmn 13_4 Plates Stockist In Mumbai

Additional Information:

• Item Code: 11454501
• Production Capacity: 1000 TON
• Delivery Time: READY
• Packaging Details: Standard Wooden Box / PALLETS

Product Details:

Nextgen Steel & Alloys supplies high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.SA 516 Grade 70 Alloy Steel Plates

 

 

Additional Information:

• Item Code: sa516gr70
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: Nhava Sheva
• Production Capacity: 1
• Delivery Time: Ready Stock
• Packaging Details: Sea Worthy Packing

Product Details:

General Characteristics of AISI 1050

• C1050 is a medium carbon, medium tensile steel with good strength, toughness and wear resistance.
• C1050 is a versatile medium carbon engineering steel that can be through hardened to a little over 2.5” (63mm), as well as being flame or induction hardened to Rc61. The steel can be readily welded and machined providing correct procedures are followed.

Forging AISI 1050 Carbon Steel

• C1050 is forged from 2100 – 2300 º F (1150 – 1280 º C) down to a temperature in the range 1600 – 1700 º F ( 870 – 925 º C.). The actual forging and finishing temperatures will depend on a number of factors, including overall reduction during forging and complexity of part being forged. Experience alone will determine near exact values for these two parameters. Parts are air cooled after forging.
  

Applications of AISI 1050

• This grade of steel is used for the manufacture of forged shafts and gears and for a wide range of applications that can make use of its good combination of mechanical properties. HEAT TREATMENT
• Heat treatment is carried out on this grade to render it suitable for machining and to impart to it specified mechanical properties.

Annealing

• Full annealing of small C1050 forgings is carried out between 1450 and 1600 º F (790 – 870 º C) followed by furnace cooling at 50 º F (10 º C) per hour, to 1200 º F (650 º C) and air cooling.

Normalizing

• The normalizing temperature range for this grade is typically 1550 – 1600 º F (840 – 870 º C,) Normalizing is followed by cooling in still air. When forgings are normalized before hardening and tempering or other heat treatment, the upper range of the normalizing temperature is used. When normalizing is the final treatment, the lower temperature range is used. HARDENING
• Hardening of this grade is carried out from an austenitizing temperature of 1500 – 1600 º F (820 – 870 º C) followed by oil or water quenching.
• Flame and induction hardening may be carried out by heating quickly to the desired case depth and quenching in water or oil. This should be followed by a tempering treatment at 300 – 400 º F (150 – 200 º C) to reduce stresses in the case, without affecting its hardness. A surface hardness as high as Rc 61 may be obtained from C1050 by this treatment.

Tempering

• Tempering after normal hardening and oil or water quenching is carried out at 750 – 1260 º F (400 – 680 º C) to give the required mechanical properties as determined by practical experience.

Machinability

• Machinability of C1050 is good providing the full annealing cycle described above is used, A coarse lamellar pearlite to coarse spheroidite microstructure gives optimum machinability in C1050.

Weldability

• This grade is readily welded with the correct procedure. Welding in the through hardened or flame or induction hardened conditions is not recommended.
• Low-hydrogen electrodes are recommended together with preheat at 300 – 800 º F (150 – 430 º C.) to be maintained during welding, Cool slowly in sand or ashes and stress relieve where possible. It may be that in certain instances normalizing may be called for after welding.

Additional Information:

• Item Code: 115
• Production Capacity: 1000 METRIC TON
• Delivery Time: READY STOCK
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

We can produce 1.7765, DIN 32CrMoV12-10 stainless steel round rods, 1.7765, DIN 32CrMoV12-10 forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 1.7765, DIN 32CrMoV12-10 chemical composition and 1.7765, DIN 32CrMoV12-10 mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

• Lenth: We can supply any lenth based on the customer's requirement.
• Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
• Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
• Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
• Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
• Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode. 
• Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirement Excellent service for all kinds of industries,with advantages of technologies, equipment and price. 
• We serve you with our honesty, integrity, and professionality.

Additional Information:

• Item Code: 100566
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Port of Dispatch: MUMBAI
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY STOCK
• Packaging Details: TARPAULIN BUNDLES WITH IRON STRAP OR WOODEN BOX

Product Details:

Alloy Steel Plates ASTM A387 ASME Sa387

NEXTGEN STEEL & ALLOYS are the  Leading Manufacturer of chromium molybdenum steel sa387 gr 11 & bar f11, cold rolled steel plate, sa 387 grade 11 steel plates, alloy steel plates asme sa387 grade 22 class 2 chromium moly, high manganese, pressure vessel & corten steel plates and abrasion resistant steel plates & alloy steel forgings from Mumbai.

 

Chromium Molybdenum Steel SA387 GR 11 

SA387 Grade 11 CL 1 SA387 Grade 11 CL 2 A387 Grade 11 CL1 A387 Grade 11 CL2

NEXTGEN STEEL & ALLOYS  - Pressure vessel used alloy steel plate SA387 Grade 11 CL 1,SA387 Grade 11 CL 2,A387 Grade 11 CL 1 and A387 Grade 11 CL 2 are with Chromium-Molybdenum alloy elements.Pressure vessel steel plate SA387 Grade 11 CL 1 and SA387 Grade 11 CL 2 are in American standard ASME SA 387/SA 387M.Boiler steel plate A387 Grade 11 Cl 1 and A387 Grade 11 Cl 2 are according to ASTM A387/A387M.These steel materials also shall conform to steel specification A 20/A 20M.These requirements outline the testing and retesting methods and procedures,permissible variations in dimensions and weight,quality and repair of defects,marking,loading,etc.

 

Features:

• Longer working life
• Easy installation
• Sturdiness

 

Product Description:

• ASME SA387 Grade 11 Class 2 is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures.

 

PLATES:

• Alloy Steel: ASTM / ASME A/SA387 GR.11,GR.12,GR.22,GR.5,GR.9,GR.91, 16mo3, Etc - with IBR
• Carbon Steel: IS2062 Gr. B / ASTM A36 / A283 Gr.C, C45, EN Series, Etc
• Boiler Quality: SA516 Gr.70, Gr.60, Gr.65 with IBR
• Stainless Steel: ASTM / ASME / AISI Gr. 304L, 316L, 310, 317L, 321, 347/347H, 904L, Etc.
• Nickle Alloy: Titanium, Inconel, Monel, Hastelloy, Cupro Nickel, Beryllium Copper, Tantalum, Etc.
• Abrasion & Wear Resistant: Abrex / Hardox / AR400 / AR500 / Rockstar / Corten Steel, Etc.
• High Tensile Plates: S690QL, Weldox, SR HSQ71, JFE Hiten, S355J2+N, IS2062 E350BO, Etc.
• Aluminium Alloys: 7075 T6, 6061 T6, 5083 H111, 5052, 6082, 1200, 1100, 2024, 2014, Etc.

Product Details:

Hadfield Steel Plates

We can supply Hadfield steel plates in thick from 3mm thick upto 40mm thick. Hadfield steel plates offered are suitable for all kinds of wear resistance applications. Hadfield steel plates are used for Jawa, Crushers, Earthmoving & Excavation purposes.
Please contact steel mart for the supply of Hadfield Steel Plates and also other tool and alloy steels and also stainless steels

Alloy Steel Plates

• We can supply all kinds of carbon and alloy steel plates in MS / Boiler quanlity / EN 8 / EN 19 / EN 24 / EN 31 Grades. Steel Mart specializes in the supply of 12%-14% manganese steel plates. We are basically looking for export enquiries from Gulf Countries and Africa.
• We are Reputed Manufacturers , Suppliers and Exporters of high quality Steel Plates & Sheets. These products are globally known for its compliance with the industry set norms. We offer them in various grades that meet the requirements of the client.
• Combining the highest quality of materials and sophisticated technology, we are presenting Plates that are made with supreme quality carbon and alloy steel. Available in different grades and configurations, the plates manufactured by us hold high tensile strength and possess longer service life.
• Made of high tensile, our Carbon Steel and Alloy Steel Plates and Sheets are specially designed to withstand high pressure. These plates have consistent and control and are available in different grades according to the requirement of the customer.

 

Product Details:

We offer Sa387 Gr. 22 Class 1/2 Alloy Steel Plate.

Details:

• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection
• Origin: Indian, European, Ukraine
• Standard: ASTM / ASME A 387

SA-387 Steel Plate, Grades 5, 9, 11, 12, 22 and 91 Class 1 and 2 Chromium - Molybdenum Alloy Steel Plates for elevated temp corrosion. For Use in Boilers and pressure vessels

SA387 GR 5 CLASS 2 A high quality chrome molybdenum alloy steel plate intended specifically for use in weldable carbon steel pressure vessels at elevated temperatures. Added molybdenum gives the material greater temperature tensile strength and the chromium provides improved corrosion resistance. SA387 GR 9 CLASS 2 Weldable carbon steel plates for pressure vessels and boilers used in elevated temperatures. The material benefits from added chromium and molybdenum which gives the steel greater corrosion resistance and resistance to heat. SA387 Grade 9 is used by fabricators who serve the oil, gas and petrochemical industry. SA387 GR 11 CLASS 2 A pressure vessel grade steel for use in elevated temperature service, ASME SA387 Grade 11 Class 2 is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures. The higher levels of chromium also provide excellent corrosion and oxidation resistance, which is a must in sour gas applications. SA387 GR 12 CLASS 2 Engineered for use in elevated temperature service, ASME SA387 Grade 12 is a chrome molybdenum carbon alloy steel for use in weldable pressure vessels and industrial boilers. The material benefits from added chromium which provides excellent corrosion and oxidation resistance making it ideal for sour service applications in the oil and gas industry.

• Our range of PLATE SA 387 GR. 5 is designed for the industrial purposes. This grade plate is made equipping great features making it versatile.
• Plate SA 387 GR. 22 is crafted with the best of the material available in the market. Vast applications of these plates can be discovered in the industries.
• High in durability and reliability, we make plate SA 387 GR 11 to meet the requirements of industrial applications. These are provided at market leading rates.
• Our clients avail from us plate sa 387 gr. 91 which is made to fill the demands of varied industries. This grade plate is desired due the variety of the work offered by the plate.

Product Details:

We have expertise in developing a wide range of Sa387 Gr. 5 Class 1/2 Alloy Steel Plate. The offered steel plate is manufactured utilizing optimum quality of raw material and leading technology in adherence to the set quality norms. Our esteemed patrons can avail the offered steel plate from us in various specifications as per their requirements. This steel plate is inspected on assorted quality parameters to ensure its excellence.

Features:

• High strength
• Good ductility and toughness
• Abrasion resistance

Specifications:

• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection
• Origin: Indian, European, Ukraine
• Standard: ASTM / ASME A 387

Additional Information:

• Item Code: SA387GR22PLATE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: NHAVA SHEVA
• Production Capacity: 50000
• Delivery Time: EX-STOCK
• Packaging Details: WOODEN PALLETS, WOODEN BOX, TRAILORS

Product Details:

A829 - 4140steel plate is a structural-quality, alloy-steel plate that can be supplied in the following conditions:

• As rolled,
• Annealed,
• Normalized,
• Normalized and Tempered.

 

A829 - 4140 can be used for a wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades.

The list for uses of A829 - 4140 is long and includes: strippers, holder blocks, mold bases, ejectors, forming dies, back-up and support tooling, fixtures, stubs, couplings, reamer bodies, tie rods, gears, gear racks, valves, chain links, jigs, spindles, sprockets, tool bodies, tool holders, guides, tracks, ways, slides, wear strips or parts, molds, brake dies, trim dies, bolsters, machinery parts and components.

 

APPLICATIONS OF AISI / SAE 4140

• This alloy finds many applications as forgings for the aerospace and oil and gas industries, along with myriad uses in the automotive, agricultural and defense industries, Typical uses are forged gears and shafts, spindles, fixtures, jigs and collars.

 

FORGING 4140 ALLOY STEEL

• Forging of this steel should be carried out between 2200 and 1650 º F (1200 and 900 º C). The lower the finishing temperature from forging, the finer will be the grain size. This alloy should ideally not be forged below 1650º F (900º C) and should be slow cooled after forging.

 

HEAT TREATMENT OF AISI 4140

• Heat treatment is carried out after hot working to render the steel suitable for machining, and to meet the mechanical property ranges specified for the steel’s particular applications. There are several ways to heat treat a given steel part and it is only through practice that the optimum treatments, temperatures and conditions may be defined. The following information should be taken as a guide only.

 

CHEMICAL COMPOSITION OF AISI 4140 STEEL PLATE

Additional Information:

• Item Code: AISI4140

Product Details:

Material groupSteels for quenching and tempering, Steels for cold extrusion, Steels for superficial hardening, Steels for pressure purposes

• Short name: 42CrMo4
• Mat.-No.: 1.7225
• Source: DIN
• EN 10083-3:2007-01
• Title: Steels for quenching and tempering -
• Part 3: Technical delivery conditions for alloy steels
• Chemical composition (in weight %)
• Element C Si Mn P S Cr Momin 0,38 max. 0,60 max. max. 0,90 0,15max 0,45 0,40 0,90 0,025 0,035 1,20 0,30
• Hot forming and heat treatment
• Hot forming: 1100 -850 °C
• Normalizing: 840 -880 °C
• Soft annealing: 680 -720 °C
• Hardening: 820 -880 °C -> Oil or water
• Tempering: 540 -680 °C min. 60 min. (approx.)

Mechanical properties
Delivery condition Quenched and tempered (+QT)Diameter d [mm] <=16 16
General Information The steel grade 42CrMo4 belongs to the product category of quenched and tempered steels. These are used for highly stressed components, where the combination of high strength and wear-resistance with tenaciousness is of utmost importance. Chemical composition 1)2) (melt analysis in percent by weight) min. max. C 0,38% 0,45% Si 0,40% Mn 0,60% 0,90% P 0,025% S 0,035% Cr 0,90% 1,20% Mo 0,15% 0,30% 42CrMo4 Quenched and tempered steels Typical mechanical properties 1) Nom. thick. e Yield strength Rp0,2 550 - 800 MPa Nom. thick. e Tensile strength Rm 850 - 1050 MPa Nom. thick. e Total elongation A2) 2,0 - 6,0 mm 8 - 15 % Material no. – according to DIN EN 10083, Teil 3 Tensile strength class C

1) Derived from tensile tests transversal to rolling direction (reference value for a hot rolled coil)
2) For the nominal thickness e, the following applies: e < 3 mm: A80 e = 3 mm: A5 Available dimensions Hot-rolled coils pickled, mill edge Thickness in mm Width in mm 2,00 – 2,24 900 – 1300 2,25 – 2,99 900 – 1350 3,00 – 3,99 900 – 1550 4,00 – 6,00 900 – 1650 Widths < 900 mm on request Hot-rolled slit strip Thickness in mm Width in mm 2,50 – 2,99 100 – 640 3,00 – 4,60 100 – 690 4,61 – 6,00 140 – 740

Additional Information:

• Item Code: 117
• Production Capacity: 1000 METRIC TON
• Delivery Time: READY STOCK
• Packaging Details: Superior Quality Polythin Bag and Standard Wooden Box

Product Details:

Leveraging by the vast experience of this domain, we have been able to offer the best quality of Alloy Steel Plates. Available with us in various specifications, the offered sheets, plates and coils are known for their high strength, durability and resistance against corrosion. Being a quality conscious name, we assure that the quality of the offered sheets, plates & coils is never compromised at our end.

Features:

• Corrosion resistance finish
• Ability to withstand high mechanical stress
• Durable construction

Stainless Steel:

• ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276
• Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S,
• 409, 410, 420, 430 etc

Carbon Steel:

• ASTM A 106, A 53, API A 5L Gr A, B, C, ASTM A 333, Gr 1 to 6 (IBR &
• NON IBR)

Alloy Steel:

• ASTM A 335, GR P1, P2, P5, P9, P11, P22, P91

Nickel Alloys:

• Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy 904,
• Titanium, Tungsten, Silver Nickel, Zirconium, Palladium, Vanadium etc

Copper Alloys:

• Aluminium, Copper, Brass & Gunmetal

Additional Information:

• Item Code: SA387GR11PLATE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: NHAVA SHEVA PORT
• Production Capacity: 50000 KGS
• Delivery Time: EX-STOCK
• Packaging Details: WOODEN BOX, WOODEN PALLETS

Product Details:

Owing to the efforts of our skilled professionals, we have been constantly involved in offering Sa387 Gr. 11 Class 1/2 Alloy Steel Plate. These steel plates are high on demand in the industry for its superior finish. Our given steel plates are manufactured from the superior quality raw material and latest technology under the direction of our skilled professional. In addition, these steel plates are available in various specifications as per the requirement of our clients.

Features:

• High strength
• Finely finished
• Dimensional accuracy

Specifications:

• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection
• Origin: Indian, European, Ukraine

Product Details:

EN18 Flat Bars are more responsive to mechanical and heat treatments than carbon steels.

Mechanical Properties:

Applications:

• Low end moderately stressed parts for vehicles. engines end machines where hard, wear resisting surface is needed. Hardness as surface hardened about 54HRC

Soft Annealing:

• Heat lo 680-720C, cool slowly in furnace. This will produce a maximum Brinell hardness of 241.

Hardening:

• Harden from a temperature of 820-680°C followed by oil water quenching

Tempering:

• Tempering Tempering temperature. 54O-680°

Product Details:

Carbon Steel EN 9Equivalents:

• BS970 Part 1 1983, 070M55
• BS970 of 1955 EN9
• German W. Stoff No. 1.1203 | American AISI 1055

 

EN9, also known as 070m55, available in diameters, flats, squares and plates with a carbon content 0.50/0.60 this is a medium carbon steel which can develop a tensile strength of 700N/mm 45tsi. In the normalized condition EN9 can be used for gears, sprockets and cams.

EN9 is a medium carbon steel grade commonly supplied in the as rolled condition. It can be flame or induction hardened to produce a high surface hardness with excellent wear resistance for a carbon steel grade.

Chemical Composition:

Mechanical Properties:

Characteristics:

• A 6% allowance should always be made for removal of surface defects during machining
• EN9 is weldable (but not recommended
• Machinability good • Ideal for 45 ton tensile applications
• Not recommended for carburizing
• Heat treatment only to limited ruling sections

Typical Applications

• Sprockets
• Cylinders
• Cams
• Crankshafts
• Keys
• Small Gears
• Machine Tools
• Grinding Balls for Ball Mills
• Ball Race Rings
• Bolts, Nuts
• Pulleys

Heat Treatment

• Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each EN9 steel component.

Forging:

• Heat slowly and uniformly to 1100°C. After forging cool slowly .
• Annealing
• Heat uniformly to 700°C. Soak well and cool slowly in the furnace.

Hardening:

• Heat uniformly to 820/840°C until heated through. Quench in oil, or water.
• Tempering
• Heat uniformly and thoroughly at the selected tempering temperature, between 550/660°C and hold at heat for one hour per inch of total thickness.

Tempering

• Heat uniformly and thoroughly at the selected tempering temperature, between 550/660°C and hold at heat for one hour per inch of total thickness.

Product Details:

ALLOY STEEL PLATES SA387 GRADE 22 CL.2

 

ASME SA387 Gr22 Cl 2 and ASTM A387 Gr22 Class 2 are 2.25% chromium – 1% Molybdenum and you can find out more effective working temperature up to 600°C, these Chromium and Molybdenum pressure vessel steel plates can effectively works very well in elevated temperatures with minimum aging of the product after thousands of hours of work.

The Molybdenum component in the SA387 ; A387 alloy, as well as increasing the tensile strength at high temperatures, also provides high resistance against oxidation and corrosion by increasing the lattice strain of the steel structure, this effectively stops the corrosive agents from dissolving the iron out of the steel structure, good for heat-resistant pressure vessels and good option for sour gas environments.

ASTM A387 Gr 22-2 and ASME SA387-22-2 steel is characterised by good weldability. These types of steel are used above all for manufacturing boilers, pressure vessels and pipes for the transportation of hot liquids. They also offer good properties at high and low temperatures. The product is always supplied in the normalised and tempered condition.

This steel grade steel plates are commonly being addressed as A387-22-2 ; SA387 Gr22-2; SA387 Gr22 Cl2; A387-22 Cl2, Chromium and Molybdenum pressure vessel steel plates; chrome moly pressure vessel plates and etc....

 

Specifications:

• Type of Steel: Alloy
• Requirements for Delivery : A20
• Yield Strength (Min. ksi) Min.MPa (Yield Point if designated YP) : (45) 310
• Spec. Thickness (Max. in.) : -
• Chemical Composition (%)
• Unless a range is specified, individual values are maximums
• Carbon : 0.05/.15
• Manganese : 0.30/0.60
• Phosphorus : 0.025
• Sulfur : 0.025
• Silicon : 0.50
• Chromium : 2.00/2.50
• Nickel :-
• Molybdenum : 0.90/1.10
• Copper : -
• Other Elements : -
• Heat Treatment Required : N&T
• Consult us for plates over thickness listed.
• Consult us for other A387 grades not listed.
• Restricted to ASTM A20 limits for unspecified elements.

 

Alloy Steel Plates SA387 GRADE 22 CL.2, is one of our major pressure vessel steel products in ex-stock, we have a wide range of plate sizes available and causes of dysfunction thicknesses range from 6 – 100mm from the origin of Korea, Japan, Western European, Eastern European, USA and China.

Additional Information:

• Item Code: SA387GRADE22
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: NHAVA SHEVA PORT
• Production Capacity: 2000M.TON
• Delivery Time: 3WEEKS
• Packaging Details: WOODEN PALLETS, WOODEN BOXES

Product Details:

We are engaged in supplying an optimal quality range of Alloy Steel Plates, which is widely used in various industries. These Alloy Steel Plates are available in various specifications as per the needs of the clients. We supply these Alloy Steel Plates using technically advanced machinery and cutting edge technology. Fabricated in conformation with international quality standards,

SA-387 Steel Plate, Grades 5, 9, 11, 12, 22 and 91 Class 1 and 2 Chromium - Molybdenum Alloy Steel Plates for elevated temp corrosion. For Use in Boilers and pressure vessels

SA387 GR 5 CLASS 2 A high quality chrome molybdenum alloy steel plate intended specifically for use in weldable carbon steel pressure vessels at elevated temperatures. Added molybdenum gives the material greater temperature tensile strength and the chromium provides improved corrosion resistance. SA387 GR 9 CLASS 2 Weldable carbon steel plates for pressure vessels and boilers used in elevated temperatures. The material benefits from added chromium and molybdenum which gives the steel greater corrosion resistance and resistance to heat. SA387 Grade 9 is used by fabricators who serve the oil, gas and petrochemical industry. SA387 GR 11 CLASS 2 A pressure vessel grade steel for use in elevated temperature service, ASME SA387 Grade 11 Class 2 is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures. The higher levels of chromium also provide excellent corrosion and oxidation resistance, which is a must in sour gas applications. SA387 GR 12 CLASS 2 Engineered for use in elevated temperature service, ASME SA387 Grade 12 is a chrome molybdenum carbon alloy steel for use in weldable pressure vessels and industrial boilers. The material benefits from added chromium which provides excellent corrosion and oxidation resistance making it ideal for sour service applications in the oil and gas industry.

Plate SA 387 GR. 22 is crafted with the best of the material available in the market. Vast applications of these plates can be discovered in the industries.

hese SA387 CR-MO Alloy Steel Plates are available in different lengths and diameters to serve diverse applications and are made of premium quality. These SA387 CR-MO Alloy Steel Plates are highly durable and have long lasting functional life. Location: China, Europe, America, Korea, Japan; Grade: 2/12/11/22/21/5/9/91/91L Specification: Thickness

Alloy Steel Plates & Sheets offered by nextgen steel is from prime manufacturers & has zero rejections steel mart firmly believes in catering to the needs of the customers by way of supplying genuine – tested materials at extremely reasonable rates steel mart is an ISO 9001:2008 certified company which reflects the quality consciousness. 

Our range of Alloy Steel Plate are available in different lengths and diameters to serve diverse applications and are made of premium quality. These Alloy Steel Plate are highly durable and have long lasting functional life.

Grades & Specification :-

• SA387 Grade 2, 5, 7, 9, 11, 12, 21, 22 Cl.1, Cl.2.

Additional Information:

• Item Code: SA387GR22

Product Details:

Alloy Steel Plate A387 Gr.91

• ASTM A387-Gr. 5, 9, 11, 12, 22, 91 CL.2

 

Nextgen Steel & Alloys Stock extensive range of products, we are offering a wide assortment of SA387 Gr91 Alloy Steel Plates. The offered steel plate is manufactured by our experts using high grade raw material, in accordance with international standards. Offered steel plate is completely tested on several parameters in order to deliver a defect free range from our end. Our steel plate is available from us on assorted sizes & customized options to choose from.

 

SA387 GR 91 CLASS 2 Where resistance to high temperature and good anti-corrosion characteristics are required, ASME SA387 Grade 91 Class 2 carbon alloy steel plate is a material to consider. It is a pressure vessel grade steel which is used commonly by fabricators who supply the oil and gas industry. Due to the materials excellent corrosion resistant properties, SA387 Grade 91 is also an option for use in sour service environments. The material has good weldability and with its heat resistant qualities, the material is a highly versatile steel which can be used in numerous applications.

 

SA-387 Steel Plate, Grades 5, 9, 11, 12, 22 and 91 Class 1 and 2 Chromium - Molybdenum Alloy Steel Plates for elevated temp + corrosion.

For Use in Boilers and pressure vessels:

• Alloy steel plates in mumbai, alloy steel plate supplier in india, alloy steel plate manufacturer, alloy steel plate manufacturers in india, alloy steel plate, supplier in india, alloy steel plate supplier, stainless steel plates mumbai
  Leading alloy steel plates in Mumbai best price guaranteed.
• flanges manufacturers |flanges manufacturers in india | flanges suppliers in india | carbon steel pipe manufacturers in india | carbon steel pipe manufacturers in mumbai | carbon steel suppliers in india | stainless steel pipe manufacturers in india |stainless steel pipe suppliers in india | 
• Alloy steel seamless pipes manufacturers in india | alloy steel seamless pipes suppliers | spiral pipe suppliers |  carbon steel plate dealers | stainless steel plate suppliers in india | boiler quality plates suppliers | boiler quality plates india | salima plate | salima plate manufacturers | pipe fittings manufacturers in india | pipe fittings suppliers in india | buttweld fittings suppliers | fasteners manufacturers in india |fasteners suppliers in india | fasteners dealers in india | ferrule fittings manufacturers india | ferrule fittings suppliers  | monel fasteners suppliers india | titanium dealer in india | nickel suppliers in india | hastelloy suppliers india | alloy 20 pipe suppliers in india | non ferrous metals suppliers india

Additional Information:

• Item Code: alloysteelplate
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 50000 M.tons
• Delivery Time: Ex-Stock
• Packaging Details: Wooden Pallets

Product Details:

Nextgen Steel Alloys, is a leading manufacturers of 4340 Steel Flat Bars. AISI 4340 is a nickel-chromium-molybdenum alloy steel known for its toughness and its ability to attain high strengths in the heat-treated condition. It has very good fatigue resistance.

This alloy, 4340, may be heat treated to high strength levels while maintaining good toughness, wear resistance and fatigue strength levels, combined with good atmospheric corrosion resistance, and strength up to around 600 º F (315 º C.) .

FORGING 4340 ALLOY STEEL

Forging should be carried out between 2250 and 1800 º F (1230 and 980 º C.). Parts should be slow cooled after forging in ashes or sand etc.

 

APPLICATIONS OF AISI / SAE 4340

Commercial and military aircraft, automotive systems, forged hydraulic and other machine tool applications, forged steel crankshafts.

 

HEAT TREATMENT OF AISI / SAE 4340

Heat treatment after forging is carried out to render the steel suitable for machining, and to meet the mechanical property limits specified for the steel’s particular applications. There are several ways to heat treat a given steel part and it is only through practice that the optimum treatments, temperatures and conditions may be defined. The following information should be taken as a guide only.

 

Additional Information:

• Item Code: 4340
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

We manufacture and export Carbon Steel Flats. The robust construction, seamless finish and resistance against corrosion, make these alloy & carbon flat & round bars as per the industry laid norms. Our customers can avail the offered alloy & carbon steel flat and round bars in various specifications, as per their needs and requirements.

Features:

• Thermal stability
• High load bearing capacity
• Resistance against impact & corrosion

Grade:

• Comprehensive stocks are held in a wide range of Alloy Tool steel specifications.
• British Standard and International specifications available. Our most popular grades
• are listed below; please contact our sales office

Additional Information:

• Item Code: 4130PLATES

Product Details:

We are supported with a rich industry experience and knowledge that assist us in manufacturing, importing and exporting Sa387 Gr. 9 Class 1/2 Alloy Steel Plate. The offered steel plates are manufactured as per the international quality standards using high quality raw material & contemporary techniques. These steel plates are tested on well-defined quality norms to ensure its excellence. We offer these steel plates on diverse specifications as per the needs of customers.

Features:

• Sturdy construction
• Durable finish standard
• Rust proof

Specifications:

• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection
• Origin: Indian, European, Ukraine

Additional Information:

• Item Code: p9plate

Product Details:

Specifications:

• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection
• Origin: Indian, European, Ukraine

Additional Information:

• Item Code: gr12cl2

Product Details:

We are engaged in manufacturing, importing and exporting a broad array of Sa387 Gr. 1 Class 1/2 Alloy Steel Plates. Offered steel plate is provided on diverse specifications as per the needs of customers. This steel plate is manufactured from the raw material & cutting edge techniques in complete compliance with the set industry norms. The given steel plate is thoroughly tested on several parameters before delivering to customers.

Features:

• Toughness
• Anti corrosive
• Heat resistance

Specifications:

• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection
• Origin: Indian, European, Ukraine

Additional Information:

• Item Code: MMNBH56

Product Details:

Specifications:

• Certificates: Mill TC As Per EN 10204 3.1/3.2, IBR Certified, Third Party Inspection
• Origin: Indian, European, Ukraine

Product Details:

Being a leader of this domain, we are engaged in manufacturing, importing and exporting Alloy Steel Plates for Steel Industry. Their precise dimension, corrosion resistance finish and durability, make these alloy steel plates highly demanded in steel industry. Our clients can avail the offered alloy steel plates for steel industry in various specifications.

Features:

• Ability to withstand high mechanical stress
• Dimensional accuracy
• Resistance against corrosion

Product Details:

ALLOY STEEL PLATES SA387 GRADE 11 CL.2

Pressure vessel used alloy steel plate ,SA387 Grade 11 CL 2,A387 Grade 11 CL 1 and A387 Grade 11 CL 2 are with Chromium-Molybdenum alloy elements.Pressure vessel steel plate SA387 Grade 11 CL 1 and SA387 Grade 11 CL 2 are in American standard ASME SA 387/SA 387M.Boiler steel plate A387 Grade 11 Cl 1 and A387 Grade 11 Cl 2 are according to ASTM A387/A387M.These steel materials also shall conform to steel specification A 20/A 20M.These requirements outline the testing and retesting methods and procedures,permissible variations in dimensions and weight,quality and repair of defects,marking,loading,etc.

In addition to the basic requirements of this specification for steel plate SA387 Grade 11 CL 1,SA387 Grade 11 CL 2,A387 Grade 11 CL 1 and A387 Grade 11 CL 2 ,certain supplementary requirements are available whenadditional control, testing, or examination is required to meetend use requirements. These include:1 Vacuum treatment,2 Additional or special tension testing,3 Impact testing, 4 Nondestructive examination.

NEXTGEN STEEL & Alloys are one of the prominent ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Supplier, Manufacturer & Exporters. As a pressure vessel grade steel for use in elevated temperature service, ASME SA387 Grade 11 Class 2 is used in a variety of industries and is highly effective, particularly in the oil, gas and petrochemical industry, where liquids and gases are often stored at higher temperatures. The higher levels of chromium also provide excellent corrosion and oxidation resistance, which is a must in sour gas applications. 

ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Sheets Manufacturer, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Sheets Exporter, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Sheets, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Equivalent Plates, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Equivalent Sheets, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Sheets, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates mumbai, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates drilling Sheets Plates, ASME SA 387 Gr11 Class 2 Chrome Moly Alloy Steel Sheets Plates Wear Plates, Alloy Steel ASME SA 387 Gr11 Class 2 Plates, Chrome Moly ASME SA 387 Gr11 Class 2 Plates. NEXTGEN STEEL & ALLOYS - The materials for coal conversion pressure vessels task under which this work was conducted has as its primary purpose the development of a basic understanding of the factors that influence the performance of alloys under the hostile conditions expected for high-temperature high pressure hydrogen service. The scope of the program addresses the three main requirements for the development of pressure-vessel materials: a basic understanding of the metallurgy, the production of reliable materials data, and the processing of the data in terms of the development of the constitutive equations and failure criteria for use by designers. The primary pressure-vessel steel that currently meets the established asme criteria for pressure-vessel applications to 482°c (900°f) is 2 1/4 cr-1 mo steel (sa-387, grade 22). One of the tasks of the program involves the investigation of advanced stronger low-alloy steels that have adequate resistance to hydrogen attack at temperatures to 565°c. We studied a standard 2 1/4 cr-1 mo steel, a modified 2 1/4 cr-1 mo steel developed by the japan steelworks of muroran, japan, and several v-ni-simodified 2 1/4 cr-1 mo steels produced by the united states steel c0mpany. 

Additional Information:

• Item Code: SA387GRADE11CL2
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: MUMBAI
• Production Capacity: 3000 M.TONS
• Delivery Time: 3WEEKS
• Packaging Details: WOODEN BOXES

Product Details:

Alloy 15CDV6 is a low carbon steel which combines a high yield strength (superior to SAE 4130) with good toughness and weldability. 15CDV6 can be readily welded with very little loss of properties during welding and without the need for further heat treatment. This alloy finds many applications in the aerospace and motorsports industries in such components as roll cages, pressure vessels, suspensions, rocket motor casings, wish bones and subframes.
 
Nextgen Steel & Alloys is a huge exporter of Alloy Steel Bars in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.
 
Chemical Composition Limits
Weight%
C
P
Si
V
Mn
S
Cr
Mo
Fe
Alloy 15CDV6
0.12-0.18
0.020 max
0.20 max
0.20-0.30
0.08-1.1
0.015 max
0.25-1.5
0.80-1.00
Bal
 
Alloy
Condition
Tensile Strength MPa
Yield Strength MPa
Elongation%
Hardness HB
Alloy 15CDV6
1.7734.2 (ann)
-
-
-
197
Alloy 15CDV6
1.7734.4
700
550
13
207
Alloy 15CDV6
1.7734.5
980-1180
790
11
293-352
Alloy 15CDV6
1.7734.6
1080-1250
930
10
321-363
 
Specifications

WS 1.7734

15CrMoV6

FE-PL63 S (AECMA)

FE-PL1505 (AECMA)

AIR 9160C

LN 668 round bar

MN 1013 round bar

ASNA 3108 sheet and plate

DIN 65389 sheet and plate

DIN 65390 sheet and plate

TE014 seamless tube

LN 9369 seamless tube

DIN 65035 forging billet

DIN 7527 forging billet

Additional Information:

• Item Code: 15CDV6
• Production Capacity: 100 TONS

Product Details:

From the initial days of our inception, we have been able to manufacture, export and import the finest quality of Alloy Steels. Available with us in various specifications, the offered alloy steels are known for their optimum strength, durability and resistance against corrosion. By using advanced machinery, we manufacture the offered alloy steels as per the industry laid norms and regulations.

Features:

• Corrosion resistance finish
• Robust construction
• Thermal stability

Specifications:

• Sheet, Plate, Rod, Bar and Tubing
• 4130, 4140, 4150, 4330 and 4340
• Available in Annealed, Normalized and Modified Conditions

Additional Information:

• Item Code: K79

Product Details:

Nextgen Steel & Alloys is an EN24 / EN24T flat bar and round bar steel stockholders and suppliers, delivering to the whole of the India. This grade is a nickel chromium molybdenum specification usually supplied hardened and tempered as EN24T or EN24U. EN24T steel is readily machineable and combines a good high tensile steel strength with shock resistance, ductility and wear resistance. It is a widely used engineering steel with a tensile strength of 850/1000 N/mm². It has reasonably good impact properties at low temperatures, whilst it is also suitable for a variety of elevated temperature applications. Flame or induction hardening of EN24T can give a case hardness of 50 HRc or higher.

Chemical composition of EN24 Flat Bars


Application of EN24 Flat Bars:
EN24 was originally introduced for use in the motor vehicle and machine tool industries for gears, pinions, shafts, spindles and the like. Later its applications became much more extended. Suitable to produce parts for such as locomotives, cranes, rolling mills, coal cutting machinery etc. where good strength and fatigue resistance is called for. Other applications for EN24 and EN24T are found in die casting and hot metal working, such as die bolsters, racks and pinions, angle pins for pressure die casting, hot stamping dies for aluminium stamping, die beds for steel stamping, lower temperature nut, bolt and rivet heading dies, large section drop forging dies. It is widely used in the plastic and rubber moulding industries for moulds (particularly rubber moulds), hob retaining rings, pattens, retaining rings for built up moulds, stop pins for moulds. For moulds EN24 is normally supplies hardened and tempered to ‘T’ condition. If a higher hardness is desired EN24T should be annealed and then heat treated to the required hardness.