Duplex Round Bars

Product Details:

We are engaged in manufacturing and exporting a wide range of Hastelloy C-276 Round Bars. We use recent technologies and machinery for the process of manufacturing these bars. These bars are brawny and sturdy with extensive resistance towards melting even in heavy pressure and varied temperature conditions. These bars play a vital role in a wide range of industrial purposes efficiently.

Standard:

• ASTM / ASME SB 574.

Grades:

• Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276)
• Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000

Product Details:

Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions, including aerospace and chemical process applications. The alloy has outstanding strength and toughness at temperatures ranging from cryogenic to elevated temperatures in the range of 2000°F (1093 °C). Alloy 625 also has exceptional fatigue resistance. Alloy 625 derives much of its strength from the addition of molybdenum and columbium. These elements also contribute to the alloy’s outstanding corrosion resistance. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Alloy 625 is used in chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactor applications. The material possesses a high degree of formability and shows better weldability than many highly alloyed nickel-base alloys. The alloy is resistant to intergranular corrosion even in the welded condition. Alloy 625 is produced by vacuum induction melting or by AOD refining. Consumable electrode remelting procedures may be used to further refine the material. Chemical processing equipment handling mixed acids both oxidizing and reducing; Seawater applications; Aircraft ducting systems ; Jet engine exhaust systems; Turbine shroud rings; Bellows and expansion joints ; Aircraft exhaust liners and turbine seals; Nuclear water reaction components.

Alloy 625 is a nickel-chromium alloy used for its high strength, excellent fabricability and outstanding corrosion resistance. Service temperatures can range from cryogenic to 980°C (1800°F). Alloy 625 strength is derived from the solid solution strengthening effect of molybdenium and niobium on its nickel-chromium matrix.

Thus precipitation-hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization.

Available tube product forms:

• Straight
• Coiled
• Seamless
• Seam welded, cold redrawn and annealed

Typical Applications:

• Wellhead components
• Sheathing
• Downhole equipment for corrosive/ sour service
• Reactor core
• Control rod components
• Gas pipeline control lines
• Heat exchangers
• Oil refining
• Chemical processing
• Control and instrumentation tubes

Typical manufacturing specifications:

• ASTM B444
• AMS 5581
• BS 3074
• Also individual customer specifications.

Industries predominantly using this grade:

• Chemical processing
• Oil and gas
• Nuclear and Power

Product Details:

We feel proud to introduce ourselves as the leading manufacturer, importer and exporter of optimum quality Astm A276 / A479 Duplex S31803 Round Bars. The offered round bar is manufactured in conformity with the set industry standards utilizing the best grade raw material and modernized technology. Furthermore, this round bar is tested on various quality parameters to ensure flawlessness. In addition to this, we offer this round bar to our precious clients at very reasonable prices.

Features:

• High strength
• Corrosion resistant finish
• Unmatched quality

Standards:

• ASTM/ASME: ASTM A 276 / A 479 / A 240, F 60 / UNS S 32205/S 31803
• Euronorm: 1.4462 X 2 CrNiMoN 22.5.3
• Afnor: Z 3 CrNi 22.05 AZ

Specifications:

Additional Information:

• Item Code: S31803

Product Details:

Grade:

• 253MA, 254SMO, 904L, SAF 2205, Duplex 2209, Duplex 2594
• A286
• LDX 2101, SAF2304 (For more details, please refer to the information page)
• Alloy 82, Alloy 200, Alloy 400, Alloy 600, Alloy 601, Alloy 625
• Alloy 800, Alloy 825, Ni80/Cr20, C276, C22, X61, X60
• Registered trademark of Outokumpu/ Avesta
• Registered trademark of Sandvik

Additional Information:

• Item Code: BH89

Product Details:

Nextgen Steel & Alloys is a leading supplier for Duplex Steel S31803 & S32205 Round bars

UNS S31803 and UNS S32205 are commonly referred to as Duplex 2205® material, whose “Duplex” name is derived from the mixed microstructure which contains about equal portions of ferrite and austenite.
Duplex 2205 Stainless Steel is a nitrogen-enhanced duplex used in applications requiring high strength and excellent corrosion resistance. It is designed to combine improved resistance to stress corrosion cracking, pitting and crevice corrosion. Duplex 2205 provides nearly double the corrosion resistance typical in other austenitic stainless steels.
Duplex 2205 Mechanical Properties:
Duplex 2205 Chemical Properties:

Product Details:

Nextgen Steel & Alloys (An ISO certified Co.) is a leading supplier for Duplex Steel S31803 & S32205 Round bars

UNS S31803 and UNS S32205 are commonly referred to as Duplex 2205® material, whose “Duplex” name is derived from the mixed microstructure which contains about equal portions of ferrite and austenite.

Duplex 2205 Stainless Steel is a nitrogen-enhanced duplex used in applications requiring high strength and excellent corrosion resistance. It is designed to combine improved resistance to stress corrosion cracking, pitting and crevice corrosion. Duplex 2205 provides nearly double the corrosion resistance typical in other austenitic stainless steels.

Duplex 2205 Mechanical Properties:

 

 

Duplex 2205 Chemical Properties:

Product Details:

Grade:

• EN1A, EN1A (L), EN8M, EN15AM, SAE-1117, SAE-1140, SAE-1141, SAE1146, VS13113,
• SAE-12L14

Product Details:

Well-known in the industry as an eminent manufacturer, supplier and importer, we are engaged in offering a wide array of EN8D Round Bars. Demanded in construction and engineering industries, the offered bars are developed in coherence with the industry set guidelines. Before final dispatch, these bars are packed properly for safe transit at the clients' end.

Features:

• Robust construction
• Excellent tensile strength
• Accurate dimensions

Product Details:

M2 is molybdenum based high-speed steel in tungsten–molybdenum series. The carbides in it are small and evenly distributed. It has high wear resistance. After heat treatment, its hardness is the same as T1, but its bending strength can reach 4700 MPa, and its toughness and thermo-plasticity are higher than T1 by 50%. It is usually used to manufacture a variety of tools, such as drill bits, taps and reamers. Its decarburization sensitivity is a little bit high.

M35 is similar to M2, but with 5% cobalt added. The addition of cobalt increases heat resistance. M35 is also known as HSSE or HSS-E.

M42 is a molybdenum-series high-speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing industries because of its superior red-hardness as compared to more conventional high-speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M42 is also less prone to chipping when used for interrupted cuts and costs less when compared to the same tool made of carbide. Tools made from cobalt-bearing high speed steels can often be identified by the letters HSS-Co.

The main use of high speed steels continues to be in the manufacture of various cutting tools: drills, taps,milling cutters,tool bits,gear cutters, saw blades, planer and jointer blades, router bits, etc., although usage for punches and dies is increasing.

High speed steels also found a market in fine hand tools where their relatively good toughness at high hardness, coupled with high abrasion resistance, made them suitable for low speed applications requiring a durable keen (sharp) edge, such as files,chisels,hand plane blades, and high quality kitchen,pocket knifives and swords.

High speed steel tools are the most popular for use in woodturning, as the speed of movement of the work past the edge is relatively high for handheld tools, and HSS holds its edge far longer than high carbon steel tools can.

Product Details:

We are the leading manufacturer, importer and exporter of a superior quality range of Astm A276 Gr. 303 Stainless Steel Round Bar. The offered round bar is manufactured in conformity with the set industry standards utilizing the best grade raw material and modernized technology. Furthermore, this round bar is tested on various quality parameters to ensure flawlessness. In addition to this, we offer this round bar to our precious clients at very reasonable prices.

Features:

• High durability
• Fine finish
• High strength

Specifications:

• Available Grades: 304/304 L, 316/316 L, 316 Ti, 321 / 321 H, 347 / 347 H, 317 / 317 L, 310 / 310 S, 309, 904 / 904 L
• Finish: Black, Bright.
• Certificates: Mill Tc As Per En 10204 3.1/3.2, Ibr Certified, Third Party Inspection.
• Origin: Indian, European, USA

Product Details:

We are one of the leading manufacturers, exporters and importers of Aluminium Alloy Bars. To manufacture the offered aluminium for general purposes as per the industry laid norms, our engineers make use of cutting-edge machinery. With the aid of our large scale production capacity, we have been able to meet the bulk assignments of aluminium for general purposes.


Features:

• Impact resistance finish
• High tensile strength
• Durability

Grade:

• Series 1000, 2000, 3000, 4000, 5000, 6000 7000

We supply engineering raw materials to our esteemed customers. If you need to know any information then contact us we will guide you.

Product Details:

Titanium round bar is a very popular go-to for many products. It requires a much more automated process to make than plate and block, which still involve a manual process. Round bar lends itself to a multitude of products, from fasteners to jewelry.

Titanium round bar is available in most of the almost 40 grades, with the most common being grade 5 and grade 2. The medical field often uses small-diameter round bar for body implantable fasteners and dental appliances. Round bar is made from very small diameters of wire for welding, all the way up to larger diameters (such as the 14″ diameter), used for clutch and flywheels.

Product Details:

We, Nextgen Steel Alloys are huge exporters of Monel 400 Round Bars in various countries including Dubai, Egypt, America, Saudi Arabia, Iran, Afghanistan, Kuwait, Bahrain, Iraq, Oman, Qatar UAE.

Specifications:

• Our Stock Range As Below: (For Each Product)
• Finish: Black, Bright.
• Certificates: Mill Tc As Per En 10204 3.1/3.2, Third Party Inspection.
• Origin: Indian, European, Usa

 

Product Details:

Nextgen Steel Alloys (An ISO 9001: 2008 company specializes in supplying od EN39B Bars in form of Round bar, Flat Bars Rolled Bars.

 

EN39B is a Case Hardening Steel - 4 1/4% Nickel Chromium Molybdenum carburising steel, generally supplied annealed to HB 277 max. Carburised and heat treated it develops a hard wear resistant case of about Rc 6-63 and a tough strong core with a typical tensile strength range 1000-1400MPa, in small to quite large sections.

 

Nextgen Steel Alloys is a huge exporter of Alloy Steel Bars in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabiaand the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

Related Specifications

• Australia AS X9315 / EN39B
• Germany DIN: 15NiCrMo16-5
• Great Britain 835M15 or 835H15
• Japan SNCM 815, JIS G 4103
• USA EN: 39B

 

Product Details:

For the diverse requirements of our valued clients, we are involved in manufacturing, importing and exporting an extensive range of Astm A276 / A479 Duplex S32205 Round Bars. These round bars are used in applications like oil and gas exploration and processing equipment. Our given round bars are manufactured from the superior quality raw material and latest technology under the direction of our skilled professional. In addition, these round bars are available in various specifications as per the requirement of our clients.

Features:

• Durable finish standard
• Anti corrosive
• Fine thickness

Our Stock Sizes:

• Outer Diameter: 6 mm to 400 mm
• Length: As per customer needs

Applications:

• Chemical processing, transport and storage – pressure vessels, tanks, piping, and heat exchangers
• Oil and gas exploration and processing equipment – piping, tubing, and heat exchangers
• Marine and other high chloride environments
• Cargo tanks for ships and trucks
• Food processing equipment

Standards:

• ASTM/ASME: ASTM A 276 / A 479 / A 240, F 60 / UNS S 32205/S 31803
• Euronorm: 1.4462 X 2 CrNiMoN 22.5.3
• Afnor: Z 3 CrNi 22.05 AZ

Specifications:

Additional Information:

• Item Code: S32205