Carbon Steel Products

Product Details:

UNS Number z S45500 Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur 0.030 % Silicon 0.50 % Chromium 11.00 to 12.50 % Nickel 7.50 to 9.50 % Molybdenum 0.50 % Copper 1.50 to 2.50 % Titanium 0.80 to 1.40 % Columbium + Tantalum 0.10 to 0.50 % Iron 71.98 to 77.48 % General Information Description Recognizing the need for high-strength alloys with good corrosion resistance to atmospheric environments, the Carpenter Research Laboratory developed Custom 455® stainless, a martensitic age-hardenable stainless steel. This alloy is relatively soft and formable in the annealed condition. A single-step aging treatment develops exceptionally high yield strength with good ductility and toughness. This stainless can be machined in the annealed condition, and welded in much the same manner as other precipitation hardenable stainless steels. Because of its low work-hardening rate, it can be extensively cold formed. The dimensional change during hardening is only about -0.001 in/in, which permits close-tolerance finish machining in the annealed state. Custom 455 stainless represents a significant advancement in the area of precipitation hardening stainless steels. It should be considered where simplicity of heat treatment, ease of fabrication, high strength and corrosion resistance are required in combination. Selection Because of the unique combination of high strength and corrosion resistance of Custom 455 stainless there are a few other alloys available for consideration. Carpenter 13-8 stainless can be considered where good transverse toughness and ductility are necessary for large sections. Elevated Temperature Use Custom 455 stainless has displayed excellent resistance to oxidation up to approximately 1100°F (593°C). Long-term exposure to elevated temperatures can result in reduced toughness in precipitation hardenable stainless steels. The reduction in toughness can be minimized in some cases by using higher aging temperatures. Short exposures to elevated temperatures can be considered, provided the maximum temperature is at least 50°F (28°C) less than the aging temperature. Corrosion Resistance Custom 455 stainless resists staining in normal air atmospheres, and shows no corrosion in fresh water. Tests in 5% salt spray at 95°F (35°C) and in 5% ferric chloride at room temperature have demonstrated good resistance to pitting and rusting. Laboratory tests in a variety of mild chemical environments have shown that the level of general corrosion resistance is superior to that of the 12% chromium steels (Type 410) and approaches that of the 17% chromium steels (Type 430). In most tests there was no significant effect of aging temperature on corrosion resistance. Hydrogen embrittlement tests in 5% acetic acid saturated with H2S at room temperature show the same degree of susceptibility as other high-strength martensitic stainless steels. All high-strength steels are subject to stress corrosion under certain stress conditions and in certain environments. Numerous severe tests have been conducted to evaluate the behavior of Custom 455 stainless in different environments and to determine the effect of aging temperature on resistance to stress-corrosion cracking. These tests include U-bend specimens, direct tension specimens, C-rings and precracked cantilever beam specimens. Environments have included marine atmospheres, 20% salt spray, and 3-1/2% sodium chloride solutions. All tests have shown that Custom 455 stainless has inherently good resistance to stress-corrosion cracking and that this resistance improves markedly as aging temperature is increased. For optimum corrosion resistance, surfaces must be free of scale, lubricants, foreign particles, and coatings applied for drawing and heading. After fabrication of parts, cleaning and/or passivation should be considered.

Additional Information:

• Item Code: 111747
• Port of Dispatch: Nhava Sheva
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY STOCK
• Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box.

Product Details:

Shock Resistant Tool Steel (S1) z Equivalent Grade GMTC AISI DIN S1 S1 1.2542 z Chemical Composition (wt %) GRADE C Si Mn P S Cr Mo V W S1 0.40 0.55 0.15 1.20 0.10 0.40 MAX 0.030 MAX 0.030 1.00 1.00 MAX 0.50 0.15 0.30 1.50 3.00 z Characteristics 1.High Impact Resistance 2.Combining Moderate Hardness With Good Toughness 3.High Hardenability z Application Pneumatic Tools???Shear Blades???Pipe Cutter Wheels???Shear Knives Hot Swaging Dies???Hot Punch Tools z Heat Treatment 1.Annealing—Heating slowly and uniformly to 790~830???, furnace cooling to 510??? at a rate 8~15???/h. Hardness max. HB 229 2.Stress Relieving — Heat to 650~675???, furnace cooling. 3.Hardening— Preheating: Warming to approx. 650???, holding 20 minutes per 25 mm. Austenitizing: Heating to 900~9550???, holding 20 minutes per 25 mm. Quenchant: By oil. 4.Tempering— Heating to 205~650???, holding 30 minutes per 25 mm. Air-cooling. Hardness HRC 58 to HRC 40


AISI S1 Chrome-Tungsten Shock Resistant Steel AISI S1 is a versatile chrome-tungsten shock-resisting tool steel. Its properties provide excellent service in both cold and hot work shock applications. In addition, it is widely used for master hobs. Its low carbon content provides toughness and its combination of alloying elements provides the carbide formation necessary for abrasion resistance, the hardenability necessary for shock tools, and improved hot work characteristics. For additional wear resistance, tools of SI may be carburized during pack hardening. Uses - Heavy duty blanking and forming dies, punches, chisels, shear blades, slitter knives, cold striking dies, cold extrusion tools, coining dies, master hobs. Hot work applications with operating temperatures under 1050F such as headers, piercers, forming tools, shear blades, and drop forge die inserts. Machinability - In the annealed condition S1 has a machinability rating of 75 as compared with a rating of 100 for a 1pct carbon tool steel. Dimensional Stability - When oil-hardened, S1 can be expected to expand approximately 0.002 in./in. of the greatest cross-section. Typical Analysis Carbon 0.500 Chromium 1.250 Chromium 0.750 Tungsten 2.250 Vanadium 0.200 Manganese 0.300 Annealing S1 can be softened to proper structure for machining by heating slowly to 1450 to 1500°F, holding at temperature for at least one hour per inch of greatest thickness, and cooling slowly to 1000°F, after which it may be air- cooled. Hardness resulting from this treatment will be Brinell 212 max. To prevent decarburization, pack or pipe-anneal in sealed containers, using the inert material or use a controlled atmosphere furnace.

Additional Information:

• Item Code: 54621
• Port of Dispatch: JNPT
• Production Capacity: 1000 TONS
• Delivery Time: READY STOCK
• Packaging Details: Packing: Superior Quality Polythin Bag and Standard Wooden Box.

Product Details:

EN9 - 070M55 Black (As rolled or forged) (CARBON STEEL) Equivalents: BS970 Part 1 1983, 070M55 BS970 of 1955 EN9 German W. Stoff No. 1.1203 | American AISI 1055 Chemical: Composition % Carbon Silicon Manganese Sulphur Phosphorus = 0,50 - 0,60 = 0,10 - 0,40 = 0,50 - 0,90 = 0,050 max = 0,050 max


Characteristics:

• A 6% allowance should always be made for removal of surface defects during machining
• EN9 is weldable (but not recommended)
• Machinability good
• Ideal for 45 ton tensile applications
• Not recommended for carburising
• Heat treatment only to limited ruling sections

Typical Applications:
Sprockets Cylinders Cams Crankshafts Keys Small Gears Machine Tools Grinding Balls for Ball Mills Heat Treatment Condition Tons/SQ. inch Tensile Strength RM MPA Yield Stress RE MPA A min on 5,65 So Hardness HB Impact IZOD FT.Lb KCV Joules Limited Ruling Section mm Normalise R S T 45 39 45/55 50/60 55/65 700 600 700/850 775/925 850/1000 355 310 415 480 570 12 13 14 14 12 - - - - - 201/255 170/223 201/255 223/277 248/302 63 250 100 63 19

EN9 – 070M55 – is a medium carbon steel usually supplied in the black condition untreated annealed. EN9 can be surface hardened to produce a high surface hardness with excellent wear resistance for a carbon steel. EN9 is general engineering applications including blades for axes, knives, and sickles as well as shafts, bushes, crankshafts, screws, and wood working drills. In the normalised condition EN9 can be used for gears, sprockets and cams.

 

 

High Peak Steels is a Stockholder of EN9 / 070M55 medium carbon steel. We deliver locally and nationally. We stock EN9 / 070M55 in black bar, rounds, flats and squares.

Product Details:

 We are offring Round Carbon Steel Bar Rods for Construction. 

Additional Information:

• Item Code: 03

Product Details:

NEXTGEN STEEL & ALLOYS is one of the leading manufacturers, suppliers of API 5L X52 Steel Plate/ Sheet.

Product details:

We have various types of steel pipes as per ASTM, API5L, API5CT, ANSI, EN, BS, DIN, JIS and GB standards

Grades under API Steel Plates/Sheets

• API 5L A Steel Plate/Sheet
• API 5L Gr.B Steel Plate/Sheet
• API 5L X42 Steel Plate/Sheet
• API 5L X52 Steel Plate/Sheet
• API 5L X60 Steel Plate/Sheet
• API 5L X65 Steel Plate/Sheet
• API 5L X70 Steel Plate/Sheet
• API 5L X80 Steel Plate/Sheet

Steel Grades

• DIN 17172
• StE 360.7TM
• EN10208-2 
• L360MB
• WNR 1.0587

 

 

• API 5L X52 steel plate/pipes, API 5L X52 steel plate/pipes, under API 5L standard, we can regard X52 steel plate/pipes as large diameter pipes. X52 steel plate/pipes is one mainly of Steel for large diameter pipes,API-X52 steel is  equal to EN10208 L360MB,and DIN 17172 StE 360.7TM.

Chemical Composition

Mechanical Properties

Please contact us for more details.

About us

Recognized among our patrons for the purpose of manufacturing, supplying, distributing and trading Stainless Steel Sheet & Plates, an ISO 9001: 2008 certified NEXTGEN STEEL & ALLOYS, Mumbai starred its operation in the year 2007. Inclusive of Austenitic Stainless Steel, Special Stainless Steels and Duplex Stainless Steels, we offer a wide range of products. The best quality stainless steel is used for manufacturing the offered stainless steel sheet & plates. Manufactured as per the industry laid norms, these plates and sheets are known for their thermal stability, accurate dimension, durable construction and resistance against corrosion. 
Large production capacity and well-designed infrastructure, has helped us in meeting the bulk demands of stainless steel sheet & plates at the patrons’ end. As per the specifications provided by the patrons, the offered products are procured from trusted vendors.

 

NEXTGEN STEEL & ALLOYS is a professional API 5L X52 steel exporter and a steel Stockist in INDIA. We keep more than 1000 tons API 5L X52 steel in stock every month. If you want to get the API 5L X52 steel price, please do not hesitate to contact us. Any need in API 5L X52 Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling to us.

Product Details:

We are rolling 1010 Carbon Steel round bars from prime main producer LRF route billets and blooms from 16mm to 130mm.The range of products which we offer to the customers are inclusive of a high quality of 1010 Carbon Steel round bars which have been made using a high quality of metals which have been bought from reliable vendors and these round bars are used for making buildings, bridges and dams. These products are rust proof in nature and they have been made keeping in mind the quality parameters which have been set by the industry in the market.

1010 Carbon Steel round bars NEXTGEN STEEL & ALLOYS firmly believes in catering to the needs of the customers by way of supplying genuine – tested materials at extremely reasonable rates. The said SAE 1010 Steel Round Bars materials are always supplied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customers’ requirements. SAE 1010 Steel round bars can be supplied in size ranging from 16mm to 130mm. 1010 Carbon Steel round bars are supplied by us to various industries. We proudly state that customers come back to us – with regular orders, not with rejection or complaints. In addition to SAE 1010 Steel round bars NEXTGEN STEEL & ALLOYS  also makes MS, EN8, EN8D, IS 2062, A105, SAE 1008, SAE 1010, LF2, EN24, EN31/SAE 52100, 20MnCr5, EN1A, EN8D, EN9, C15, C20, C25, C22, C30, SS 410, EN42. We are supplying these 1010 round bars to our customers in Ahmedabad, Surat, Baroda, Kadi, Rajkot, Surendranagar, Mumbai, Pune, Chennai, Jaipur, Indore, Ajmer, Gujarat, and Maharashtra, Rajasthan, Madhya Pradesh and other parts of India. We are rolling SAE 1010 Round Bars from prime main producer LRF route billets and blooms from 16mm to 130mm.The range of products which we offer to the customers are inclusive of a high quality of SAE 1010 Round Bars which have been made using a high quality of metals which have been bought from reliable vendors and these round bars are used for making buildings, bridges and dams. These products are rust proof in nature and they have been made keeping in mind the quality parameters which have been set by the industry in the market.

SAE 1010 Round bars and SAE 1008 Round bars NEXTGEN STEEL & ALLOYS. firmly believes in catering to the needs of the customers by way of supplying genuine – tested materials at extremely reasonable rates. The said SAE 1010 Steel Round Bars materials are always supplied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customers requirements. SAE 1010 Steel round bars can be supplied in size ranging from 16mm to 130mm. SAE 1010 Steel round bars are supplied by us to various industries. We proudly state that customers come back to us – with regular orders, not with rejection or complaints.

Additional Information:

• Item Code: 1010
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Mumbai
• Production Capacity: 200 M.TONS
• Delivery Time: READY STOCK
• Packaging Details: WODDEN BOX

Product Details:

WE NEXTGEN STEEL & ALLOYS ARE THE STOCKIST OF Corten Plates, Corten Steel Plates, Corrosion Resistant Plates Supplier in Mumbai-India.

 

We NEXTGEN STEEL & ALLOYS have specialization in supplying a wide range of Corten Steel IRSM 41 Grade to meet varied industrial construction requirements. Today, in construction industry, there is an increased demand for our corrosion resistant plates that are thicker and complies with a specific standard. These products are procured from some of the most reliable vendors of the market. They use only finest quality of material such as steel and metal for manufacturing and fabricating these plates

 

Weathering steel, great-regarded under the trademark corten plates and right here and there composed without the hyphen as "corten plates", is a gathering of metal alloys which had been created to avert the requirement for portray, and structure a solid rust-like appearance if provided to the climate for some years.

Corten Plates, Corten Steel Plates, Corrosion Resistant Plate, Corten A Steel Plates, Corten B Steel Plates, Corten Steel IRS M-41 plates, CORTEN PLATES ASTM A 588, CORTEN PLATES ASTM A 242, CORTEN PLATES Services, Corten high wear resistant steel Plates, COR-TEN O, COR-TEN 490, COR-TEN 570, Cor-ten steel plate ASTM equivalents.

 

WE HOLD THE STOCK OF UTTAM VALLUE MAKE, BHUSHAN MAKE & SAIL MAKE PLATES IN COLD ROLLED & HOT ROLLED.

The first corten were given the same old undertaking A 242 ("Corten A") from the ASTM global gauges organization. Greater modern-day ASTM reviews are A 588 ("Corten B") and a 606 for meager sheet. In Indian requirements is applicable in keeping with IRSM 41. All combos are in like manner introduction and usage.

Characteristics

"Weathering" implies that due to their compound creations, those steels show increased resistance to barometrical corrosion contrasted with unalloyed steels. That is as a consequence of the steel structures a protecting layer on its floor suffering from the weather. The corrosion impeding impact of the defensive layer is delivered by way of the particular appropriation and centralization of alloying additives in it. The layer ensuring the floor creates and recovers persistently when subjected to the impact of the weather. On the cease of the day, the metal is allowed to rust preserving in mind the cease aim to shape the "defensive" covering.

Additional Information:

• Item Code: CORTEN
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX / CRATES

Product Details:

Features:

• Accurate dimensions
• Corrosion resistance
• High strength
• Robustness

Additional Information:

• Item Code: S355J2W
• Production Capacity: 1000 TONS
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX / PALLETE

Product Details:

Carbon steel pipes are widely available and relatively affordable, making it a popular choice for very large projects such as pipelines. Stainless steel pipes are made from an alloy of steel and chromium, and are one of the more expensive types of pipe on the market.

 

NEXTGEN STEEL & ALLOYS stocks and supplies full range of carbon steel seamless and carbon steel welded pipes. ASTM/ASME A-106/SA-106 seamless pipe is one of our most widely used grade of carbon steel, followed by ASTM A 333 Grade 6 low temperature service pipes. Both these grades of carbon steel pipes are readily available ex-stock for all standard thicknesses up to SCH160. Metline is a reputed distributor of carbon steel seamless pipes and carbon steel welded pipes manufactured by manufacturers in India such as MSL, ISMT and JINDAL SAW.

 

ASTM/ASME A106/SA106 carbon steel seamless pipes are used in industrial applications involving high heat, including process piping, boiling plants, compression stations and refineries. Meanwhile, for low temperature service applications ASTM/ASME A333/SA333 grade pipes are preferred.

Popular Grades of Carbon Steel Pipes & Tubes

• API STD 5L GRADE B, SEAMLESS
• ASTM A 53 GRADE B, SEAMLESS, ASME SA 53 GRADE B, SEAMLESS
• ASTM A106 GRADE B, SEAMLESS, ASME SA 106 GRADE B, SEAMLESS
• API 5 LX GRADE X52, SEAMLESS
• ASTM A 53 GRADE B, WELDED
• API STD 5 L GRADE B, WELDED
• API STD 5 LX GRADE X 42, WELDED
• ASTM A 53 GRADE B, WELDED
• API 5 L GRADE B, DOUBLE SUBMERGED ARC WELDED (DSAW
• API STD 5 LX GRADE X 42, DSAW
• A-120 / A53 GRADE A WELDED

Additional Information:

• Item Code: 01
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Product Details:

Carbon Steel WNRF , RTJ , BLRF , SORF , SWRF Flange A105N

As an important company, we are occupied in offering a broad range of Carbon Steel Flanges. Widely used in the industries of chemicals, pharmaceuticals, food processing and dairy, the entire stock of Carbon Steel Flanges is hardened for avoiding any breakage. Primarily installed for mechanically connecting two pipes together or a pipe to valve, tee or choke, these flanges are available in different shapes like square, round and rectangular.

Features:

• Easy installation
• Low maintenance
• Smooth operation

Specifications:

• ASTM A105 / A105N / A694F42 / 46 / 52 / 56 / 60 / 65 / 70 / A350 LF3 / A350 LF2, etc
• ASTM A182 F1 / F5/ F9/ F11 / F22 / F91 / etc

Additional Information:

• Item Code: STEELWNRF80
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Product Details:

Ours is an illustrious organization, which is engaged in manufacturing, supplying and importing Carbon Steel Forged Fitting. These fittings are designed and developed in adherence to the guidelines laid in the industry to attain highest benchmarks of quality. Additionally, these fittings are available in different technical specifications to suit the demands of clients.

Features:

• Compact design
• Perfect finish
• High strength

Specifications:

Additional Information:

• Item Code: D121

Product Details:

NEXTGEN STEEL ALLOYS are Manufacturers, Supplier and Exporters of Carbon Steel Flanges. Our qualitative range of Carbon Steel Flanges is exclusively designed for several piping applications of various industries. These are designed and developed in accordance with the international quality standards. Carbon Steel Flanges that are precision engineered using best quality raw material. We also customize these industrial flanges as per the requirements of the clients.

Specifications :-

 

Product Details:

Our Steel Plates are manufactured by the leading manufacturers using high grade basic material which provides them properties like resistance from corrosion and high durability. These steel plates are used for various general construction and industrial applications. Our plates are strongly built and non-corrosive, conforming to the defined parameters of the industry.

Available range : Steel Plate- GRADE C45, TISCRAL & SAIL Hard Steel Plate

Application : Automobile Industries, Pumps, Petrochemicals and Oil & Natural Gas Steel Plate - GRADE C45, TISCRAL

 

Ask for Price

Our range of Steel Plate- GRADE C45, TISCRAL is widely known for its quenching and tempering ability. This kind of steel is widely used various industries for general engineering purposes. This range is designed to withstand tremendous amount of weights and pressure. This steel plate is rust proof in their make and it has been made using the best technology available in the market and they have been priced at very reasonable rates in the market.

Chemical Composition:

Advantages

• Robust construction
• Resistance to atmospheric corrosion
• High ductility

Ask for Price

The SAIL Hard Steel Plate are wear resistant plates with minimum certified hardness. These plates are required in various wear resistant applications.

Specifications

Hot rolled Steel Plates, Sheets and Coils (Armour steel)
Customers are seeking extreme protection and safety performance for their end-products. Ramor plate has excellent ballistic properties in combination with high hardness and strength. Ramor is developed for applications, where blast protection or high ballistic resistance is required.

Applications

• Doors, window frames, walls
• Bank counters and vaults
• Money exchange offices
• Cars, security vans
• Secured containers
• Shooting gallery devices
• Military vehicles and equipment

Additional Information:

• Item Code: 118888888
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY STOCK