Nextgen Steel And Alloys
Nextgen Steel And Alloys
Kamathipura, Mumbai, Maharashtra
GST No. 27ATYPM1096M1ZP
TrustSEAL Verified
Call 0804897916093% Response Rate
SEND EMAIL
 

Hastelloy Round Bar

Our product range includes a wide range of hss round bars, hastelloy c276 bars and hastelloy x round bar.

HSS Round Bars

HSS Round Bars
  • HSS Round Bars
  • HSS Round Bars
  • HSS Round Bars
  • HSS Round Bars
Get Best Quote
Approx. Price: Rs 1,050 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Kilogram
ShapeRound
TechniqueHot Rolled
Material GradeSS305
Single Piece Length6 meter, 3 meter, 18 meter, 36 meter
Thickness/Diameter3-4 inch, 7 Inch, 0-1 inch, 1-2 inch, 2-3 inch
BrandNextgen Steel & Alloy
Hardness167 shore A
ApplicationManufacturing
Tensile strength4700 MPa

M2 is molybdenum based high-speed steel in tungsten–molybdenum series. The carbides in it are small and evenly distributed. It has high wear resistance. After heat treatment, its hardness is the same as T1, but its bending strength can reach 4700 MPa, and its toughness and thermo-plasticity are higher than T1 by 50%. It is usually used to manufacture a variety of tools, such as drill bits, taps and reamers. Its decarburization sensitivity is a little bit high.

M35 is similar to M2, but with 5% cobalt added. The addition of cobalt increases heat resistance. M35 is also known as HSSE or HSS-E.

M42 is a molybdenum-series high-speed steel alloy with an additional 8% cobalt. It is widely used in metal manufacturing industries because of its superior red-hardness as compared to more conventional high-speed steels, allowing for shorter cycle times in production environments due to higher cutting speeds or from the increase in time between tool changes. M42 is also less prone to chipping when used for interrupted cuts and costs less when compared to the same tool made of carbide. Tools made from cobalt-bearing high speed steels can often be identified by the letters HSS-Co.

The main use of high speed steels continues to be in the manufacture of various cutting tools: drills, taps,milling cutters,tool bits,gear cutters, saw blades, planer and jointer blades, router bits, etc., although usage for punches and dies is increasing.

High speed steels also found a market in fine hand tools where their relatively good toughness at high hardness, coupled with high abrasion resistance, made them suitable for low speed applications requiring a durable keen (sharp) edge, such as files,chisels,hand plane blades, and high quality kitchen,pocket knifives and swords.

High speed steel tools are the most popular for use in woodturning, as the speed of movement of the work past the edge is relatively high for handheld tools, and HSS holds its edge far longer than high carbon steel tools can.
Request
Callback
Yes! I am interested

Hastelloy C276 Bars

Hastelloy C276 Bars
  • Hastelloy C276 Bars
  • Hastelloy C276 Bars
  • Hastelloy C276 Bars
Get Best Quote
Approx. Price: Rs 2,500 / KilogramGet Latest Price
Product Brochure

Product Details:

Size30-40 mm
MaterialHastelloy
ShapeRound
Unit Length3 m, 6 m, 9 m
GradeFe 500D, Fe 500
StandardBS4449
BrandNextgen Steel & Alloy
Tensile Strength295 MPa

We are engaged in manufacturing and exporting a wide range of Hastelloy C-276 Round Bars. We use recent technologies and machinery for the process of manufacturing these bars. These bars are brawny and sturdy with extensive resistance towards melting even in heavy pressure and varied temperature conditions. These bars play a vital role in a wide range of industrial purposes efficiently.


Standard:

  • ASTM / ASME SB 574.

Grades:

  • Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276)
  • Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000
Request
Callback
Yes! I am interested

Hastelloy X Round Bar

Hastelloy X Round Bar
  • Hastelloy X Round Bar
  • Hastelloy X Round Bar
  • Hastelloy X Round Bar
Get Best Quote
Approx. Price: Rs 1,500 / KilogramGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity100 Kilogram
BrandVILLARES, CARPENTER
ShapeRound
Single Piece Length3 meter, 6 meter
Density0.270 lb/inch3
Tensile Strength295 MPa
Elongation20%
ApplicationChemical Handling, Gas Handling
Size/Diameter1/2 inch, 3 inch, 4 inch, >4 inch

Strong and Oxidation Resistance

HASTELLOY® X alloy (UNS N06002 (W86002) is a nickel-chromium-iron-molybdenum alloy that possesses an exceptional combination of oxidation resistance, fabricability and high-temperature strength. It has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. X alloy exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600°F (650, 760 and 870°C) for 16,000 hours.


Ease of Fabrication

NEXTGEN STEEL & ALLOYS HASTELLOY® X alloy has excellent forming and welding characteristics. It may be forged or otherwise hot-worked, providing it is held at 2150°F (1177°C) for a time sufficient to bring the entire piece to temperature. As a consequence of its good ductility, HASTELLOY® X alloy is also readily formed by cold- working. All hot- or cold- worked parts should be annealed and rapidly cooled in order to restore the best balance of properties.

  • The alloy can be welded by a variety of techniques, including gas tungsten arc (GTAW), gas metal arc (GMAW), shielded metal arc (SMAW), and resistance welding.
  • Additional information regarding fabrication can be found here.


Heat Treatment:

Wrought forms of HASTELLOY® X alloy are furnished in the solution heat-treated condition unless otherwise specified. X alloy is typically solution heat-treated at 2150°F (1177°C) and rapid cooled. Bright annealed products are cooled in hydrogen. Annealing at temperatures lower than the solution heat- treating may cause precipitation of secondary phases, which may affect the alloy’s strength and ductility.


Useful for Aircraft, Furnace and Chemical Process Components

X alloy has wide use in gas turbine engines for combustion zone components such as transition ducts, combustor cans, spray bars and flame holders as well as in afterburners, tailpipes and cabin heaters. It is recommended for use in industrial furnace applications because it has unusual resistant to oxidizing, reducing and neutral atmospheres. Furnace rolls of this alloy were still in good condition after operating for 8,700 hours at 2150°F (1177°C). HASTELLOY® X alloy is also used in the chemical process industry for retorts, muffles, catalyst support grids, furnace baffles, tubing for pyrolysis operations and flash drier components.

Other common names: Alloy X, Inconel® HX

 

Hastelloy X is a nickel-chromium-iron-molybdenum superalloy with outstanding high temperature strength, oxidation resistance, and fabricability. Alloy X’s oxidation resistance is excellent up to 2200° F. This nickel steel alloy has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. Matrix stiffening provided by the molybdenum content results in high strength in a solid-solution alloy having good fabrication characteristics. Although this nickel alloy is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres. Two common conditions that often lead to early failure in high temperature alloys, carburization and nitriding, Hastelloy X resists.

Request
Callback


Additional Information:

  • Item Code: C276
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
  • Port of Dispatch: MUMBAI
  • Production Capacity: 2000
  • Delivery Time: READY STOCK
  • Packaging Details: WOODEN BOX
Yes! I am interested
X

Product Videos

Watch More Videos

Explore More Products

View All Products




Reach Us
Sanjay Mehta (Sales Manager)
Nextgen Steel And Alloys
47, Navnidhi Bhavan, Shop No. 2, 5th Kumbharwada Lane
Kamathipura, Mumbai - 400004, Maharashtra, India
Get Directions


Call Us


Send E-mail