Carbon Steel Sheets

Product Details:

High carbon steels contain from 0.7 to 1.00% C with manganese ranging from 0.5% to 0.9% This steels are commonly known as spring steel. These steels are generally operated at very high stresses and heat-treated to obtain the maximum elastic limits and fatigue resistance without becoming sufficiently brittle to cause sudden failure in service. Hardenability of spring steel is very important because only fully hardened springs have the maximum resistance to take a permanent set (sagging)

We offer the following grades in spring steel:
C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.

 

 

Physical Properties:
Hardness: 220HV max
Yield Strees: 290N/mm² min
Tensile Strength: 640N/mm² max

Range:
Thickness: 0.07 mm to 4.00 mm
Width: 8 mm to 500 mm (in thickness lower than 0.6 mm, 4 mm wide material can be supplied)
Hardness: Fully annealed material with a maximum hardness of 200 VPN & special temper material with hardness ranging from 230 VPN to 270 VPN.

Nextgen Steel & Alloys is a huge exporter of C80 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

Additional Information:

• Item Code: C80
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Product Details:

The springs use for counter balancing rolling shutter can be make from spring steel wire or flat spring steel strip. Flat spring steel strips are widely used in rolling shutter industies, due to its durability and 3000 cycles rolling up and down per year. It is usually cut into 3m, 3.5m, 5m, 5.5m, 6m from flat spring big coils. Flat spring steel trip used for garage door spring, the material shall be 0.65-0.75 percent carbon steel strip with hardened and tempered process. Blue tempered in flat spring steel strip, can be anti-corrossion for a long time without getting rust.


Grades :

• C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.

Nextgen Steel & Alloys is a large exporter of C70 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

Product Details:

Features:

• Accurate dimensions
• Corrosion resistance
• High strength
• Robustness

Additional Information:

• Item Code: S355J2W
• Production Capacity: 1000 TONS
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX / PALLETE

Product Details:

Carbon steel is an alloy consisting of iron and carbon. Several other elements are allowed in carbon steel, with low maximum percentages. These elements are manganese, with a 1.65% maximum, silicon, with a 0.60% maximum, and copper, with a 0.60% maximum. Other elements may be present in quantities too small to affect its properties.

 

There are four types of carbon steel based on the amount of carbon present in the alloy. Lower carbon steels are softer and more easily formed, and steels with a higher carbon content are harder and stronger, but less ductile, and they become more difficult to machine and weld. Below are the properties of the grades of carbon steel we supply:

• Low Carbon Steel – Composition of 0.05%-0.25% carbon and up to 0.4% manganese. Also known as mild steel, it is a low-cost material that is easy to shape. While not as hard as higher-carbon steels, carburizing can increase its surface hardness.
• Medium Carbon Steel – Composition of 0.29%-0.54% carbon, with 0.60%-1.65% manganese. Medium carbon steel is ductile and strong, with long-wearing properties.
• High Carbon Steel – Composition of 0.55%-0.95% carbon, with 0.30%-0.90% manganese. It is very strong and holds shape memory well, making it ideal for springs and wire.
• Very High Carbon Steel - Composition of 0.96%-2.1% carbon. Its high carbon content makes it an extremely strong material. Due to its brittleness, this grade requires special handling.

Additional Information:

• Item Code: 05
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other

Product Details:

WE NEXTGEN STEEL & ALLOYS ARE THE STOCKIST OF Corten Plates, Corten Steel Plates, Corrosion Resistant Plates Supplier in Mumbai-India.

 

We NEXTGEN STEEL & ALLOYS have specialization in supplying a wide range of Corten Steel IRSM 41 Grade to meet varied industrial construction requirements. Today, in construction industry, there is an increased demand for our corrosion resistant plates that are thicker and complies with a specific standard. These products are procured from some of the most reliable vendors of the market. They use only finest quality of material such as steel and metal for manufacturing and fabricating these plates

 

Weathering steel, great-regarded under the trademark corten plates and right here and there composed without the hyphen as "corten plates", is a gathering of metal alloys which had been created to avert the requirement for portray, and structure a solid rust-like appearance if provided to the climate for some years.

Corten Plates, Corten Steel Plates, Corrosion Resistant Plate, Corten A Steel Plates, Corten B Steel Plates, Corten Steel IRS M-41 plates, CORTEN PLATES ASTM A 588, CORTEN PLATES ASTM A 242, CORTEN PLATES Services, Corten high wear resistant steel Plates, COR-TEN O, COR-TEN 490, COR-TEN 570, Cor-ten steel plate ASTM equivalents.

 

WE HOLD THE STOCK OF UTTAM VALLUE MAKE, BHUSHAN MAKE & SAIL MAKE PLATES IN COLD ROLLED & HOT ROLLED.

The first corten were given the same old undertaking A 242 ("Corten A") from the ASTM global gauges organization. Greater modern-day ASTM reviews are A 588 ("Corten B") and a 606 for meager sheet. In Indian requirements is applicable in keeping with IRSM 41. All combos are in like manner introduction and usage.

Characteristics

"Weathering" implies that due to their compound creations, those steels show increased resistance to barometrical corrosion contrasted with unalloyed steels. That is as a consequence of the steel structures a protecting layer on its floor suffering from the weather. The corrosion impeding impact of the defensive layer is delivered by way of the particular appropriation and centralization of alloying additives in it. The layer ensuring the floor creates and recovers persistently when subjected to the impact of the weather. On the cease of the day, the metal is allowed to rust preserving in mind the cease aim to shape the "defensive" covering.

Additional Information:

• Item Code: CORTEN
• Delivery Time: READY STOCK
• Packaging Details: WOODEN BOX / CRATES

Product Details:

EN9 - 070M55 Black (As rolled or forged) (CARBON STEEL) Equivalents: BS970 Part 1 1983, 070M55 BS970 of 1955 EN9 German W. Stoff No. 1.1203 | American AISI 1055 Chemical: Composition % Carbon Silicon Manganese Sulphur Phosphorus = 0,50 - 0,60 = 0,10 - 0,40 = 0,50 - 0,90 = 0,050 max = 0,050 max


Characteristics:

• A 6% allowance should always be made for removal of surface defects during machining
• EN9 is weldable (but not recommended)
• Machinability good
• Ideal for 45 ton tensile applications
• Not recommended for carburising
• Heat treatment only to limited ruling sections

Typical Applications:
Sprockets Cylinders Cams Crankshafts Keys Small Gears Machine Tools Grinding Balls for Ball Mills Heat Treatment Condition Tons/SQ. inch Tensile Strength RM MPA Yield Stress RE MPA A min on 5,65 So Hardness HB Impact IZOD FT.Lb KCV Joules Limited Ruling Section mm Normalise R S T 45 39 45/55 50/60 55/65 700 600 700/850 775/925 850/1000 355 310 415 480 570 12 13 14 14 12 - - - - - 201/255 170/223 201/255 223/277 248/302 63 250 100 63 19

EN9 – 070M55 – is a medium carbon steel usually supplied in the black condition untreated annealed. EN9 can be surface hardened to produce a high surface hardness with excellent wear resistance for a carbon steel. EN9 is general engineering applications including blades for axes, knives, and sickles as well as shafts, bushes, crankshafts, screws, and wood working drills. In the normalised condition EN9 can be used for gears, sprockets and cams.

 

 

High Peak Steels is a Stockholder of EN9 / 070M55 medium carbon steel. We deliver locally and nationally. We stock EN9 / 070M55 in black bar, rounds, flats and squares.

Product Details:

S355JR+AR Durbar® S355JR+AR is a strong, robust floor plate offering a range of benefits including scope to reduce construction costs Floor plate with structural integrity Durbar® S355JR+AR is part of Tata Steel’s range of hot-rolled structural steel floor plate. Extensively tested and proven, Durbar’s structural properties reduce construction costs by eliminating the need for separate structural and flooring components. Versatile and durable, Durbar is manufactured with a distinctive raised stud pattern for slip resistance. We have been producing Durbar to the highest quality standards for more than 40 years. Durbar is certified to ISO TS 16949:2009 and meets the requirements of the Construction Products Directive. Tested for slip resistance Durbar has been tested and assessed for slip potential. Its pattern of studs creates a slip-resistant surface at all angles and allows plates to be used in any direction. Wessex Test Equipment Limited, an independent research establishment, tested Durbar both wet (clean water) and dry in accordance with the standard and guidelines shown below and assessed its potential for slip as extremely low for the dry samples and low for the wet samples1 . Testing was conducted on uncoated Durbar under laboratory conditions. The actual slip-resistance of Durbar will depend upon the real-life application and the environment in which it is used. Galvanising, painting or coating Durbar can influence its slip resistance. Plate ID Sample reference Pendulum test value (WET) Durbar floor plate H 306 21 010 1, 2, 3, 4 47, 47, 47, 47 H 306 20 010 1, 2, 3, 4 42, 46, 42, 48 UK Slip Resistance Group Guidelines (issue 4, 2011) The potential for slip value reported applies in the instance of access by able-bodied pedestrians.

• High slip potential 0-24
• Medium slip potential 25-35
• Low slip potential 36-64
• Extremely low slip potential 65+

The results show that under water wet conditions or other similar contaminants the majority of those floor areas tested exhibit a low potential for slip. 1 BS 7976-2:2002 Pendulum Testers scope for use in the determination of slip/skid resistance of surfaces Mechanical properties Min. yield strength ReL (N/mm2 ) Min.-max tensile strength Rm (N/mm2 ) Min. elongation after fracture A (%) Impact test L0 = 5.65√S0 3 ≤ t ≤ 12.5 Temp ºC Min energy J S355JR+AR 355 470-630 20 20 27 Notes: 1. Lower yield strength or 0.2% proof stress applies. 2. Material thickness (t) in millimetres. 3. Impact properties of quality JR products are verified only when specified at the time of the enquiry and order. 4. Impact strengths apply to thicknesses ≥ 6mm and are for standard test pieces only. Chemical composition C Mn P S Si N Max Max Max Max Max Max S355JR+AR 0.24 1.60 0.035 0.035 0.55 0.012 Values are in weight percentages 27mm 27mm 9mm 27mm The dimensions in the image above are approximate.Durbar® is a registered trademark of Tata Steel. While care has been taken to ensure that the information contained in this publication is accurate, neither Tata Steel Europe Limited, nor its subsidiaries, accept responsibility or liability for errors or for information which is found to be misleading. Tata Steel Europe Limited is registered in England under number 05957565 with registered office at 30 Millbank, London SW1P 4WY, United Kingdom. Copyright 2016 Tata Steel Europe Limited Tata Steel PO Box 10.000 1970 CA IJmuiden The Netherlands IS0116:250:EN:0116 Weight per unit area Thickness (mm) Weight (kg/m2 ) All grades 3.00 27 4.50 39 6.00 50 8.00 66 10.00 82 12.50 101 Note: These are typical weights; actual weights will vary owing to stud height and positive width tolerances. Tolerances on thickness Thickness tolerances as per EN 10051:2010

We supply in many countries UAE, Qatar, Saudi, Egypt, USA, UK, Canada, Sri Lanka, Iran, Australi, Norway, Switzerland etc

Additional Information:

• Item Code: 11000
• Production Capacity: 1000 METRIC TONS
• Delivery Time: READY STOCK

Product Details:

We supply high quality metal raw material at best prices for Indian as well as overseas customers. Kindly enquire with us for more information and orders.