Nextgen Steel And Alloys
Mumbai, Maharashtra
GST No. 27ATYPM1096M1ZP
TrustSEAL Verified
Call 08048979160 84% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Kg |
| Material Grade | RO5200 |
| Diameter | 1MM TO 150MM |
| Usage/Application | Industrial |
| Size | 0.001mm to 100mm thick |
| Steel Grade | RO5200 |
| Material | Tantalum |
| Thickness | 1.0mm - 1.5mm |
| Length | 50MM TO 5000MM |
| Density | 16.6 Mg/m3 |
| Surface Treatment | Coated |
Unalloyed Tantalum is supplied to ASTM F560 – R05200 composition limits. Tantalum is selected for its corrosion resistance, thermal conductivity, high melting point, and ability to form a dielectric oxide film.
Tantalum is very ductile and can be readily cold formed due to a low work hardening rate. Welding can be accomplished via resistance, TIG, or electron beam methods, with care taken to protect the weld and heat affected zone from air during welding. Because of the potential for hydrogen embrittlement, Tantalum can not be used for extended service in air or other oxidizing atmospheres above 260°C unless a protective inert atmosphere or vacuum is provided.| Nominal Composition | |
| TANTALUM NOMINAL COMPOSITION | |
| Carbon | 0.01% |
| Oxygen | 0.02% |
| Nitrogen | 0.01% |
| Hydrogen | 0.00% |
| Niobium | 0.10% |
| Iron | 0.01% |
| Titanium | 0.01% |
| Tungsten | 0.05% |
| Molybdenum | 0.02% |
| Silicon | 0.01% |
| Nickel | 0.01% |
| Tantalum | Balance |
Additional Information: